Color Tile Joint Filler

1 Extra bond power , good waterproof
2 Lasting protection against mould and mildew
3 More colors available
4. Non-toxic
LK-301 Color ceramics joint filler is designed for filling the gaps between most types of ceramic tile and natural stone applications. It is treated with the exclusive Sanitized biocides, providing effective, lasting protection against mould and mildew.
To fill in the joints between porcelain, ceramic, natural stone and quarry tiles, as well as extruded tiles and glass blockwork. The surface of the hardened grout has a textured finish and is not impervious.


Features & Advantages
1. Extra power of bond and fixing, good waterproof. Prevent the white birch
2. Pressure resistance and fungal resistance are excellent, cannot extend-retract
3. Easy operation, after filling the water, work can begin, is used for less than 3 mm tile gap
4. Good flexibility can stop the surface from cracking caused by thermal contracting
5. Color is even, which is made by advance ferrous color materials, color is stable forever.
6. Non toxic, a green building material

Range of applications
This product can be applied to the joint filling of all kinds of interior tiles, split tiles, culture tile. rustic tile and marble (3mm-10mm filler), color matching is subject to the design requests

Technical Data

Testing Items
Unit
Standard CG1
Report
Result
Abrasion resistance
Mm3
<2000
1875
Qualified
Shinkage
Mm/m
<3.0
0.60
Qualified
Soakage (30 min later)
g
<5.0
4.60
Qualified
Soakage (240 min later)
g
<10.0
9.30
Qualified
STANDARD EXECUTED JC/1004-2006 (Filler for Ceramic wall and Floor tiles)

Operation Procedures
1. Add clean water to buckets, then slowly add the grout powder, stirring continuously until a lump-free consistency is achieved.
2.The mixing ratio :Thick filler grouts: 25kg powder: (6~6.5) kg water;
Thin filler grouts: 25kg powder: (8.5~9) kg water.
3.Use a rubber trowel to spread tile grout adhesive into the tile joints in a diagonal way and ensure that all joints are properly filled.
4. After about 2 hours of drying, The grout on tile surface should be cleaned with wet sponge or cloth.
5.After 24 hours of drying, The grout haze on tile surface can be cleaned using tile cleaner and water.



Storage
It shall be stored in the cool and dry place, and can be stored for 1 year if not unsealed

Package
25kg,5kg

LK-301