a. Excellent initial adhesion performance.
b. Super aging resistance performance.
c. Light color material.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive
adhesive.
The series of PRS®-A petroleum resins product are a category of C5 aliphatic hydrocarbon resins applicable for hot melt adhesive and pressure sensitive
adhesive
. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various
degrees by the application of these C5
petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of PRS®-A1085, A1090, A1095, A1100, A2085, A2095, A2100, A2110 C5 Hydrocarbon resins in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
f. In the hot melt adhesive industry , PRS®-A series product may alone be applied in hot melt adhesive as tackier, also may be used combined with the other tackfying resins which may improve some properties of hot melt adhesive.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
Saturday, July 30, 2011
Petroleum Resin Applied in Adhesives
a. can improve the wetting property of master material
b. Super aging resistance performance.
c. Light color material.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive
.
The petroleum resins product are a category of C5 aliphatic hydrocarbon resins applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
b. Super aging resistance performance.
c. Light color material.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive
.
The petroleum resins product are a category of C5 aliphatic hydrocarbon resins applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
Petroleum Resin Applied in Adhesives
a. Improve the wetting property of master material
b. Super aging resistance performance.
c. Light color material.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive. The petroleum resins products are a category of C5 aliphatic hydrocarbon resins, applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
b. Super aging resistance performance.
c. Light color material.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive. The petroleum resins products are a category of C5 aliphatic hydrocarbon resins, applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
Petroleum Resin Applied in Adhesives
a. can improve the wetting property of master material
b. Super aging resistance performance.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive
adhesive.
The C5 aliphatic hydrocarbon resins are applicable for hot melt adhesive and pressure sensitive
adhesive
. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various
degrees by the application of these C5
petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
b. Super aging resistance performance.
Refined C5 Petroleum Resin Applied in Adhesives
1. Applications
Presently, C5 petroleum resin is playing gradually more and more important role as tackfier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive
adhesive.
The C5 aliphatic hydrocarbon resins are applicable for hot melt adhesive and pressure sensitive
adhesive
. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various
degrees by the application of these C5
petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price.
2. Properties of C5 Hydrocarbon resin in the Hot Melt Adhesive:
a. Good fluidity which can improve the wetting property of master material.
b. Excellent initial adhesion performance.
c. Super aging resistance performance.
d. Light color material.
e. transparent, no-smell and low volatility material.
Recommend Application Field: Hot melt adhesive.
Other Applications: Hot melt type of pressure-sensitive adhesive or solvent type of pressure-sensitive adhesive.
36 Not contain styrene and non-toxic granite adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Petroleum Resin Applied in Hot-melt Road Marking Paints
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Fast drying speed of paint
e. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
b. Good fluidity
c. High anti-abrasion
d. Fast drying speed of paint
e. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
Petroleum Resin Applied in Hot-melt Road Marking Paints
a. Good fluidity
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The series of PRS®-R1100, PRS®-R2100, PRS®-R3100 product are a category of C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The series of PRS®-R1100, PRS®-R2100, PRS®-R3100 product are a category of C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
Petroleum Resin Applied in Hot-melt Road Marking Paints
a. Good fluidity
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
Refined C5 Petroleum Resin Applied in Hot-melt Road Marking Paints
1. Applications
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
Petroleum Resin C5
1, professional factory
2, competittive price
3, good quality
4, prompt shipment
C5 hydrocarbon resin HAN-A1100 is suitable for hot melt adhesives. They have excellent compatibility with elastomers as SIS, SBS, SEBS, SEPS and also have excellent compatibility with natural rubber, synthetic rubber and EVA as well as natural adhesive resin (such as terpene, rosin and other ramifications) which ensures the improvement to each performance. Characteristics Better fluidity and can improve the wetting of principal part materials. Have better glutinosity and sistinguished initial adhibiting performance Excellent anti-aging property Light color Transparent, low smell and low volatileness Specifications: 1. Appearance: Yellowish Granule 2. Color (Gardner in 50% toluene) : 5.0 3. Softening Point (Centigrade, Ball) : 95-105 4. Acid Value (mg KOH/g) : 0.3max 5. Melt Viscovity(200 mPa. s) :220 max 6. Flash Point (Deg C) : 260 min 7. Specific Gravity (20/20 Centigrade) : 0.97 8. Ash Content (wt. %) : 0.02max
2, competittive price
3, good quality
4, prompt shipment
C5 hydrocarbon resin HAN-A1100 is suitable for hot melt adhesives. They have excellent compatibility with elastomers as SIS, SBS, SEBS, SEPS and also have excellent compatibility with natural rubber, synthetic rubber and EVA as well as natural adhesive resin (such as terpene, rosin and other ramifications) which ensures the improvement to each performance. Characteristics Better fluidity and can improve the wetting of principal part materials. Have better glutinosity and sistinguished initial adhibiting performance Excellent anti-aging property Light color Transparent, low smell and low volatileness Specifications: 1. Appearance: Yellowish Granule 2. Color (Gardner in 50% toluene) : 5.0 3. Softening Point (Centigrade, Ball) : 95-105 4. Acid Value (mg KOH/g) : 0.3max 5. Melt Viscovity(200 mPa. s) :220 max 6. Flash Point (Deg C) : 260 min 7. Specific Gravity (20/20 Centigrade) : 0.97 8. Ash Content (wt. %) : 0.02max
Petroleum Resin C9
1, professional factory
2, competittive price
3, good quality
4, prompt shipment
Appearance: Granule.
Softening point: CY90: 90 (80Deg. C ~90Deg. C), CY100: 100 (90Deg. C ~100Deg. C), CY110: 110 (100Deg. C ~110Deg. C), CY120: 120 (110Deg. C ~120Deg. C), CY130: 130 (120Deg. C ~130Deg. C), Cy140: 140 (130Deg. C ~140Deg. C). Colour(Gardner 50% Toluene): 5#~18# +.
Density(25 Deg. C): 1.00~1.16; Bromine Value(gBr/100g): 50~110.
Acid Value(mgKOH/g): Max0.5. Ash Content(%): Max0.1.
MELT VISCOSITY (200Deg. C): 400~800.
Character:
It is aromatic hydrocarbon resin, light yellow granular, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity.
Use:
1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating.
2. Rubber treatment: Used as adhesion booster.
3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue.
4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink.
5. Paper making industry: Used in paper sizing agent.
6. Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent.
Packing: 25kg PP. Bag, paper & PP. Compound bag, paper bag 500kg big bag
2, competittive price
3, good quality
4, prompt shipment
Appearance: Granule.
Softening point: CY90: 90 (80Deg. C ~90Deg. C), CY100: 100 (90Deg. C ~100Deg. C), CY110: 110 (100Deg. C ~110Deg. C), CY120: 120 (110Deg. C ~120Deg. C), CY130: 130 (120Deg. C ~130Deg. C), Cy140: 140 (130Deg. C ~140Deg. C). Colour(Gardner 50% Toluene): 5#~18# +.
Density(25 Deg. C): 1.00~1.16; Bromine Value(gBr/100g): 50~110.
Acid Value(mgKOH/g): Max0.5. Ash Content(%): Max0.1.
MELT VISCOSITY (200Deg. C): 400~800.
Character:
It is aromatic hydrocarbon resin, light yellow granular, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity.
Use:
1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating.
2. Rubber treatment: Used as adhesion booster.
3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue.
4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink.
5. Paper making industry: Used in paper sizing agent.
6. Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent.
Packing: 25kg PP. Bag, paper & PP. Compound bag, paper bag 500kg big bag
Petroleum Resin for Hot-melt Road Marking Paints
a. Good fluidity
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
1. Introduction
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields
: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
b. High anti-abrasion
c. Fast drying speed of paint
d. Strong Dirt-resistant
1. Introduction
The C5 petroleum resin products applicable for hot melt road painting, which can enhance the tenacity, hardness and adhesive force of paint material and form a smooth coating surface. The resin product can be always kept in a stable state in all four seasons by adding some special additives. And it also has a good compatibility with the rosin resin. When it is applied in the high-grade complex painting, this resin enables the coating film to achieve good properties on waterproof, UV ray resistance and chemical corrosion resistance. At the same time, it improves remarkably the brightness and dryness of the coating.
2. Distinguished Properties in the Application of Hot Melt Road Marking Painting:
a. Light color
b. Good fluidity
c. High anti-abrasion
d. Enable the filling to be uniform dispersion condition and no- sedimentation
e. Fast drying speed of paint
f. Strong Dirt-resistant.
3. Recommended Application Fields
: Hot melt road marking paint.
Other Applications: Pressure-sensitive adhesive agent.
Petroleum Resin
1, professional factory
2, competittive price
3, good quality
4, prompt shipment
C5 hydrocarbon resin HAN-A1100 is suitable for hot melt adhesives. They have excellent compatibility with elastomers as SIS, SBS, SEBS, SEPS and also have excellent compatibility with natural rubber, synthetic rubber and EVA as well as natural adhesive resin (such as terpene, rosin and other ramifications) which ensures the improvement to each performance. Characteristics Better fluidity and can improve the wetting of principal part materials. Have better glutinosity and sistinguished initial adhibiting performance Excellent anti-aging property Light color Transparent, low smell and low volatileness Specifications: 1. Appearance: Yellowish Granule 2. Color (Gardner in 50% toluene) : 5.0 3. Softening Point (Centigrade, Ball) : 95-105 4. Acid Value (mg KOH/g) : 0.3max 5. Melt Viscovity(200 mPa. s) :220 max 6. Flash Point (Deg C) : 260 min 7. Specific Gravity (20/20 Centigrade) : 0.97 8. Ash Content (wt. %) : 0.02max
2, competittive price
3, good quality
4, prompt shipment
C5 hydrocarbon resin HAN-A1100 is suitable for hot melt adhesives. They have excellent compatibility with elastomers as SIS, SBS, SEBS, SEPS and also have excellent compatibility with natural rubber, synthetic rubber and EVA as well as natural adhesive resin (such as terpene, rosin and other ramifications) which ensures the improvement to each performance. Characteristics Better fluidity and can improve the wetting of principal part materials. Have better glutinosity and sistinguished initial adhibiting performance Excellent anti-aging property Light color Transparent, low smell and low volatileness Specifications: 1. Appearance: Yellowish Granule 2. Color (Gardner in 50% toluene) : 5.0 3. Softening Point (Centigrade, Ball) : 95-105 4. Acid Value (mg KOH/g) : 0.3max 5. Melt Viscovity(200 mPa. s) :220 max 6. Flash Point (Deg C) : 260 min 7. Specific Gravity (20/20 Centigrade) : 0.97 8. Ash Content (wt. %) : 0.02max
Photocatalyst nano tio2 coating for lamp light glass and board(self-cleaning coating)
Photocatalyst nano tio2 coating for lamp light glass and board,self-cleaning coating.
Photocatalyst nano tio2 coating for lamp light glass and board(self-cleaning coating) :
1: Product Principle:
Adopting the special technics, spreading a flat of rigid nano titanium dioxide membrane on the surface of obiects. Making full use of super hydrophile and light- catalyse activation of nano-titanium dioxide, whose paiticle size is below 10nm in order to make the basic material possess the special function.
2: Appearance:
Primitive colors, under the condition of ray irradiation, will find the soft multicolor diffraction membrane.
3. Product Function:
1) Self-cleaning: Nano titanium dioxide poeeseees the capacity of super hydrophile, which can prevents the adsorption of lampblack, dust,etc. to make the surface of basic board keep clean for a long time.
2). Other function: air-cleaning, killing the bacteria and increasing oxyanion concentration, etc.
4. Using Range:
1). Used for various boards, lamps, autocars, outer walls and other objects.
2). Various plastic, metal, glass, concrete and other materials.
5. Technics Parameter:
Grade
Nano-titanium dioxide
Average particle size
Nano titanium dioxide
Crystal form
The thickness of membrane
Using Method
Security
Self-cleaning Material
5.5 nm
Anatase(activation)
200nm-2um
Spraying/Brushing
Innocuity
Photocatalyst nano tio2 coating for lamp light glass and board(self-cleaning coating) :
1: Product Principle:
Adopting the special technics, spreading a flat of rigid nano titanium dioxide membrane on the surface of obiects. Making full use of super hydrophile and light- catalyse activation of nano-titanium dioxide, whose paiticle size is below 10nm in order to make the basic material possess the special function.
2: Appearance:
Primitive colors, under the condition of ray irradiation, will find the soft multicolor diffraction membrane.
3. Product Function:
1) Self-cleaning: Nano titanium dioxide poeeseees the capacity of super hydrophile, which can prevents the adsorption of lampblack, dust,etc. to make the surface of basic board keep clean for a long time.
2). Other function: air-cleaning, killing the bacteria and increasing oxyanion concentration, etc.
4. Using Range:
1). Used for various boards, lamps, autocars, outer walls and other objects.
2). Various plastic, metal, glass, concrete and other materials.
5. Technics Parameter:
Grade
Nano-titanium dioxide
Average particle size
Nano titanium dioxide
Crystal form
The thickness of membrane
Using Method
Security
Self-cleaning Material
5.5 nm
Anatase(activation)
200nm-2um
Spraying/Brushing
Innocuity
Photocatalyst nano-tio2 used for Paint
Photocatalyst nano-tio2 used for coating paint cosmetics additive pigment home car and indoor air freshener
Photocatalyst nano-tio2 used for coating paint cosmetics additive pigment home car and indoor air freshener.
Our photocatalyst(nano tio2 series products, which have excellent of Remove unplesant smell in toilet.Removing of pet smell : Decompose of components caused smells and sterilization. In door air-cleaning : deodroizing of living room, kitchen, toilet etc, antibacterial, decomposing of toxic-substances.cleaning : dirt-prevention of outer walls and bill-boards etc.And widely use for coating, paint, cosmetics,pigment, air freshener,such as indoor, home. school, hospital, public places and etc.
Photocatalyst nano-tio2 used for coating paint cosmetics additive pigment home car and indoor air freshener.
Our photocatalyst(nano tio2 series products, which have excellent of Remove unplesant smell in toilet.Removing of pet smell : Decompose of components caused smells and sterilization. In door air-cleaning : deodroizing of living room, kitchen, toilet etc, antibacterial, decomposing of toxic-substances.cleaning : dirt-prevention of outer walls and bill-boards etc.And widely use for coating, paint, cosmetics,pigment, air freshener,such as indoor, home. school, hospital, public places and etc.
Pipe Wrap Tape
Pipe Tape, Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrap Tapes, Pipe Wrapping Tapes for Water Gas Oil Pipe Coating.
Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) System Description:
The T-300 series is cold applied pipe wrap tape coating systems for anticorrosion of field joints, fittings, and specifically piping. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.
T-300 Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) Series Coating Systems with AWWA C-214 Standard:
Type of Joint tape (Pipe Wrap Tape):
T-365
T-380
T-3100
T-3130
Thickness
(ASTM D 1000)
mm
mil
mm
mil
mm
mil
mm
mil
0.64
25
0.76
30
1.02
40
1.27
50
Tensile:
31 lbs/in
31 lbs/in
41 lbs/in
52 lbs/in
Length:
40 Meter
30 Meter
25 Meter
20 Meter
Width:
2, 3, 4, 6, 9,12
Colour:
Black, White, Red, Blue, Purple, etc.
Elongation:
300%
Peel Adhesion to Prime Pipe:
(ASTM D 1000)
230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8)
0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249)
0.2g/100in
2
/24h, 0.3mg/cm
2
/24h
Water Absorption: (ASTM D570)
≤ 0.1
Volume Resistively: (ASTM E257)
2.5 X 10
12
ohm·cm
Dielectric Strength: (ASTM D 149)
40 KV
Temperature Range:
(Normal in Ground Service)
-30 to 160
o
F, -34 to 71
o
C
Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) System Description:
The T-300 series is cold applied pipe wrap tape coating systems for anticorrosion of field joints, fittings, and specifically piping. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.
T-300 Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) Series Coating Systems with AWWA C-214 Standard:
Type of Joint tape (Pipe Wrap Tape):
T-365
T-380
T-3100
T-3130
Thickness
(ASTM D 1000)
mm
mil
mm
mil
mm
mil
mm
mil
0.64
25
0.76
30
1.02
40
1.27
50
Tensile:
31 lbs/in
31 lbs/in
41 lbs/in
52 lbs/in
Length:
40 Meter
30 Meter
25 Meter
20 Meter
Width:
2, 3, 4, 6, 9,12
Colour:
Black, White, Red, Blue, Purple, etc.
Elongation:
300%
Peel Adhesion to Prime Pipe:
(ASTM D 1000)
230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8)
0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249)
0.2g/100in
2
/24h, 0.3mg/cm
2
/24h
Water Absorption: (ASTM D570)
≤ 0.1
Volume Resistively: (ASTM E257)
2.5 X 10
12
ohm·cm
Dielectric Strength: (ASTM D 149)
40 KV
Temperature Range:
(Normal in Ground Service)
-30 to 160
o
F, -34 to 71
o
C
37 Modified Epoxy Resin concrete construction sealant glue for Planting Stud Bolt
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Pipeline Joint wrapping tape
Pipe Wrap, Joint Coatings & Accessory Products
OEM,ODM
SGS test report
ASTM D 1000
Used for welding
1 System description:
The XUNDA-T300 series is Cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The
Joint wrap tape
shall be applied by hand or with a wrapping machine.
2 Structure:
Backing: stabilized polyethylene
Adhesive: butyl rubber compound and adhesive synthetic resins
Interleaf: Anti Adhesive Siliconised film
Application:
3 Application:
Provides a permanent bond to the primed steel pipes surface and provides protection against chemical electrolytic corrosion for underground pipelines.
Because of flexibilities of hand apply tapes or joint wrap and inner wrap tapes, it is suitable for irregular pipe , flanges, elbows, and etc…. Long term, corrosion protection
High flexible
High chemical resistance under severe condition of soil.
Complies with EN-DIN 12068 and AWWA C-214 international standards and also IGS and IPS Iranian standards.
Wide range of application and service temperature.
Outstanding electric property and permanent adhesion.\
Specially fitted for wrapping pipe joints, girth weld, flanges, elbows, fittings and etc.
A non stick siliconized interleaf in incorporated.
Note: Various wide, length and thickness are available unique project requirement
OEM,ODM
SGS test report
ASTM D 1000
Used for welding
1 System description:
The XUNDA-T300 series is Cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The
Joint wrap tape
shall be applied by hand or with a wrapping machine.
2 Structure:
Backing: stabilized polyethylene
Adhesive: butyl rubber compound and adhesive synthetic resins
Interleaf: Anti Adhesive Siliconised film
Application:
3 Application:
Provides a permanent bond to the primed steel pipes surface and provides protection against chemical electrolytic corrosion for underground pipelines.
Because of flexibilities of hand apply tapes or joint wrap and inner wrap tapes, it is suitable for irregular pipe , flanges, elbows, and etc…. Long term, corrosion protection
High flexible
High chemical resistance under severe condition of soil.
Complies with EN-DIN 12068 and AWWA C-214 international standards and also IGS and IPS Iranian standards.
Wide range of application and service temperature.
Outstanding electric property and permanent adhesion.\
Specially fitted for wrapping pipe joints, girth weld, flanges, elbows, fittings and etc.
A non stick siliconized interleaf in incorporated.
Note: Various wide, length and thickness are available unique project requirement
Pipeline Thread Sealant
WIDELY USED IN THE THREADLOCKING, COMPOUNDS RETAINING, PLATE GASKETING,VALVE AND THREAD SEALING.
1. Easy to use for sealing and locking most metal thread pipeline and thread joints. Can be
applied to inside thread pipe. Save cost and efficiency.
2, Easy disassembled and low torque assembly available, good sealing and locking effect,
especially apply thin stainless steel and brass pipeline
3, An effective solution to the problem of corner sealed for pipeline, bond parts can be
adjusted before fixture time after assembly.
4, 100% wholly fill the pipe thread gap, not contaminate the sealed mediums, not block
pipeline
5, Resistance pressure, broad temperature range (-55 to +150 ) application , resistant
to most chemicals, vibration and aging
1. Easy to use for sealing and locking most metal thread pipeline and thread joints. Can be
applied to inside thread pipe. Save cost and efficiency.
2, Easy disassembled and low torque assembly available, good sealing and locking effect,
especially apply thin stainless steel and brass pipeline
3, An effective solution to the problem of corner sealed for pipeline, bond parts can be
adjusted before fixture time after assembly.
4, 100% wholly fill the pipe thread gap, not contaminate the sealed mediums, not block
pipeline
5, Resistance pressure, broad temperature range (-55 to +150 ) application , resistant
to most chemicals, vibration and aging
Pipeline Thread Sealant
WIDELY USED IN THE THREADLOCKING, COMPOUNDS RETAINING, PLATE GASKETING,VALVE AND THREAD SEALING.
Features:
1. Easy to use for sealing and locking most metal thread pipeline and thread joints. Can be
applied to inside thread pipe. Save cost and efficiency.
2, Easy disassembled and low torque assembly available, good sealing and locking effect,
especially apply thin stainless steel and brass pipeline
3, An effective solution to the problem of corner sealed for pipeline, bond parts can be
adjusted before fixture time after assembly.
4, 100% wholly fill the pipe thread gap, not contaminate the sealed mediums, not block
pipeline
5, Resistance pressure, broad temperature range (-55 to +150 ) application , resistant
to most chemicals, vibration and aging
Features:
1. Easy to use for sealing and locking most metal thread pipeline and thread joints. Can be
applied to inside thread pipe. Save cost and efficiency.
2, Easy disassembled and low torque assembly available, good sealing and locking effect,
especially apply thin stainless steel and brass pipeline
3, An effective solution to the problem of corner sealed for pipeline, bond parts can be
adjusted before fixture time after assembly.
4, 100% wholly fill the pipe thread gap, not contaminate the sealed mediums, not block
pipeline
5, Resistance pressure, broad temperature range (-55 to +150 ) application , resistant
to most chemicals, vibration and aging
Piping Thread Sealants
Seal instantly, for on-line low pressure testing. Cured adhesive can seal to the brust strength of most piping system.
TS542
Fine threads
For sealing the fine threads of hydraulic and pneumatic connectors.
TS545
Hydraulic & Pneumatic sealant
Fast curing,low strength.
No pollution to hydraulic pipe system.
For high pressure hydraulic system and tapered pipe up to M36 sealing.
Without fillers or particles, could not foul valves or filters systems.
TS567
High viscosity, instant sealing. For sealing M80 or smaller .
Withstands temperatures up to 200 and excellent solvent resistance, can sealing high pressure tapered pipe threads and fittings,can used on stainless steel surfaces.
TS568
Steel liquefier adhesive
Medium strength ,Can instant seal tapered pipe threads with high temperature and high pressure
TS569
Medium viscosity, medium strength.
Can seal pneumatic & hydraulic systems.
TS577
Coarse threads
Thixotropic, high viscosity, fast curing, medium strength.
For sealing tapered & cylindrical thread up to M80 stainless steel high pressure threads.
Can used on drinking water system.
Product
Container
Color
Extrusion rates(g/min)
Tack free(min)
Gap fill(mm)
Elongation(%)
Tensile shear strength(N/mm
2
)
Temperature range()
TS207
300ml/85g
White/Clear
≥100
30
6
≥300
1.5
-50-210
TS587
300ml/85g
Blue
≥125
20
6
≥310
1.7
-50-210
TS593
300ml/85g
Black
≥100
30
6
≥300
2.0
-50-200
TS595
300ml/85g
Clear
≥100
30
6
≥300
2.7
-50-200
TS596
300ml/85g
Red
≥250
30
6
≥130
2.7
-50-260
TS598
300ml/85g
Black
≥220
30
6
≥300
2.7
-50-210
TS5699
300ml/85g
Grey
≥200
30
6
≥100
1.5
-50-210
TS542
Fine threads
For sealing the fine threads of hydraulic and pneumatic connectors.
TS545
Hydraulic & Pneumatic sealant
Fast curing,low strength.
No pollution to hydraulic pipe system.
For high pressure hydraulic system and tapered pipe up to M36 sealing.
Without fillers or particles, could not foul valves or filters systems.
TS567
High viscosity, instant sealing. For sealing M80 or smaller .
Withstands temperatures up to 200 and excellent solvent resistance, can sealing high pressure tapered pipe threads and fittings,can used on stainless steel surfaces.
TS568
Steel liquefier adhesive
Medium strength ,Can instant seal tapered pipe threads with high temperature and high pressure
TS569
Medium viscosity, medium strength.
Can seal pneumatic & hydraulic systems.
TS577
Coarse threads
Thixotropic, high viscosity, fast curing, medium strength.
For sealing tapered & cylindrical thread up to M80 stainless steel high pressure threads.
Can used on drinking water system.
Product
Container
Color
Extrusion rates(g/min)
Tack free(min)
Gap fill(mm)
Elongation(%)
Tensile shear strength(N/mm
2
)
Temperature range()
TS207
300ml/85g
White/Clear
≥100
30
6
≥300
1.5
-50-210
TS587
300ml/85g
Blue
≥125
20
6
≥310
1.7
-50-210
TS593
300ml/85g
Black
≥100
30
6
≥300
2.0
-50-200
TS595
300ml/85g
Clear
≥100
30
6
≥300
2.7
-50-200
TS596
300ml/85g
Red
≥250
30
6
≥130
2.7
-50-260
TS598
300ml/85g
Black
≥220
30
6
≥300
2.7
-50-210
TS5699
300ml/85g
Grey
≥200
30
6
≥100
1.5
-50-210
Piping Thread Sealants
Tightsen piping thread sealants can seal pipeline thread, avoid leakage, prevent rust, and make instant seal. Cured adhesive can bear a very high pressure that can break the pipe itself. A good replacement of traditional sealing twine, oil or belt
TS545 Fast cure, low strength. No pollution to hydraulic pipe system, can be appliedon surfaces with light oil. Contains no fillers and will not foul valves or fluidfiltering systemsTS554 Resistance to chemical mediums, especially used for sealing refrigerationpipe system threads.TS567 High viscosity, instant sealing. Can seal high pressure cone threads andtie-in and also for stainless steel surfaces. TS568 Medium strength. Can instantly seal tapered pipe threads under high temperature.TS569 Medium viscosity, medium strengthTS577 Thixotropic, high viscosity, fast curing, high strength. Can seal drink waterpipe system.
TS545 Fast cure, low strength. No pollution to hydraulic pipe system, can be appliedon surfaces with light oil. Contains no fillers and will not foul valves or fluidfiltering systemsTS554 Resistance to chemical mediums, especially used for sealing refrigerationpipe system threads.TS567 High viscosity, instant sealing. Can seal high pressure cone threads andtie-in and also for stainless steel surfaces. TS568 Medium strength. Can instantly seal tapered pipe threads under high temperature.TS569 Medium viscosity, medium strengthTS577 Thixotropic, high viscosity, fast curing, high strength. Can seal drink waterpipe system.
Plastic Threalocker
Plastic Threadlocker
A unique product specially designed for locking fairing screws, screen screws, any screws
Threalocker Adhesive GL-58
The products like the ThreeBond 1400 series are synthetic-resin locking agents that prevent screws and bolts from loosening, leaking, or rusting. The force required to remove a screw to which 1400 has been applied is 10% to 20% greater than the force to tighten it. These products are standard materials, indispensable in the assembly of electronic and mechanical.
A unique product specially designed for locking fairing screws, screen screws, any screws which have to be stopped from vibrating loose but not damage the plastic. All anerobic thread lockers the likes of Loctites deteriate plastic and paint this dosn`t. This cures into a rubbery form preventing the
ingress of water and corrosion
, and allowing a frequent removal of the fixing. As with all Threebond products, thoroughly clean the surfaces before assembly. Typical applications are screens, fairings, electrical screws, anti tampering (by putting on the screw head) boat fittings, archery bow screws ect. A briliant addition to your workshop, if your into bikes, cars, jet ski`s or boats plus you can use it at home. it has a thousend uses once you have it!
A unique product specially designed for locking fairing screws, screen screws, any screws
Threalocker Adhesive GL-58
The products like the ThreeBond 1400 series are synthetic-resin locking agents that prevent screws and bolts from loosening, leaking, or rusting. The force required to remove a screw to which 1400 has been applied is 10% to 20% greater than the force to tighten it. These products are standard materials, indispensable in the assembly of electronic and mechanical.
A unique product specially designed for locking fairing screws, screen screws, any screws which have to be stopped from vibrating loose but not damage the plastic. All anerobic thread lockers the likes of Loctites deteriate plastic and paint this dosn`t. This cures into a rubbery form preventing the
ingress of water and corrosion
, and allowing a frequent removal of the fixing. As with all Threebond products, thoroughly clean the surfaces before assembly. Typical applications are screens, fairings, electrical screws, anti tampering (by putting on the screw head) boat fittings, archery bow screws ect. A briliant addition to your workshop, if your into bikes, cars, jet ski`s or boats plus you can use it at home. it has a thousend uses once you have it!
Plastic and Rubber Grade Titanium Dioxide TiO2
Rutile Titanium dioxide CR-518 has stable chemical property ,excellent hiding power and high tint strength.
Rutile Titanium dioxide TiO2 CR518 (Chloride process) plastic and rubber Grade
1- Characteristics
Rutile Titanium Dioxide CR-518 (Chloride process) also exhibits very low dispersant demand, a benefit for water-borne systems, and low oil absorption and vehicle demand, a benefit for high solids coatings. it offers excellent tinting strength, ease of dispersion and very high exterior durability. It is recommended for exterior plastics applications including vinyl siding, window profiles and fencing, agricultural film and outdoor furniture where it provides excellent color retention and chalk resistance.
2- Specification
Rutile Titanium dioxide (TiO2) CR518 (Chloride process) plastic and rubber Grade
Titanium Dioxide (min) %
97
Rutile content (min) %
99
Specific Gravity
4.2
Bulk Density (g/cc)
0.80
Treatment
Al
Whiteness
99.2
Oil Absorption (max) g/100g
17
pH
6.0 to 8.0
Volatile matter at 105°C(%)
0.6
Average particle size microns
0.17
Grit (325 mesh) % max
0.004
3- Packing
Rutile Titanium dioxide CR518 (Chloride process) plastic and rubber Grade
25kg/multilayer paper-PEbag, 22 mts/20’FCL
4- Use:
Rutile Titanium dioxide CR518 (Chloride process) plastic and rubber Grade
Plastic,rubber product,widely used for Polystyrene, PVC pipe, PE film, TPR and EVA used for producing shoes.
Rutile Titanium dioxide TiO2 CR518 (Chloride process) plastic and rubber Grade
1- Characteristics
Rutile Titanium Dioxide CR-518 (Chloride process) also exhibits very low dispersant demand, a benefit for water-borne systems, and low oil absorption and vehicle demand, a benefit for high solids coatings. it offers excellent tinting strength, ease of dispersion and very high exterior durability. It is recommended for exterior plastics applications including vinyl siding, window profiles and fencing, agricultural film and outdoor furniture where it provides excellent color retention and chalk resistance.
2- Specification
Rutile Titanium dioxide (TiO2) CR518 (Chloride process) plastic and rubber Grade
Titanium Dioxide (min) %
97
Rutile content (min) %
99
Specific Gravity
4.2
Bulk Density (g/cc)
0.80
Treatment
Al
Whiteness
99.2
Oil Absorption (max) g/100g
17
pH
6.0 to 8.0
Volatile matter at 105°C(%)
0.6
Average particle size microns
0.17
Grit (325 mesh) % max
0.004
3- Packing
Rutile Titanium dioxide CR518 (Chloride process) plastic and rubber Grade
25kg/multilayer paper-PEbag, 22 mts/20’FCL
4- Use:
Rutile Titanium dioxide CR518 (Chloride process) plastic and rubber Grade
Plastic,rubber product,widely used for Polystyrene, PVC pipe, PE film, TPR and EVA used for producing shoes.
Plate alignment white adhesive
Lushi plate alignment white adhesive
1.double component
2.easy to operate
3.water resistance
4.high strengh
Features:
1. Double component, curing at room temperature.
2. Good initial bonding strength, high strength.
3. Easy to operate.
4. Water resistance, high temperature resistance.
5.Contain no formaldehyde, has no stimulation and pollution.
Application Range:
1. Mainly used for the bonding of wood and all kinds of cork.
2. Particularly applicable to laminated, finger-joint, installation, manufacturing and composite floorboard
3. Has good bonding properties for inorganic materials and metal.
Packing:
Base: 20Kg
Curing Agent: 2Kg, 3Kg
Slump
/ mm
≤ 1
Extrudability /ml/min
≥ 80
Tack-free time
/ min
≤ 180
Weight loss on heating
/%
≤ 10
Elastic recovery ratio
/%
≥ 80
Tensile modulus / Mpa (standard conditions)
> 0.4
Tensile properties at maintained extension
No damage
Cohesiveness after UV radiation
No damage
Cohesiveness after hot pressing-cold extending
No damage
Definite elongation cohesiveness after emergence
No damage
1.double component
2.easy to operate
3.water resistance
4.high strengh
Features:
1. Double component, curing at room temperature.
2. Good initial bonding strength, high strength.
3. Easy to operate.
4. Water resistance, high temperature resistance.
5.Contain no formaldehyde, has no stimulation and pollution.
Application Range:
1. Mainly used for the bonding of wood and all kinds of cork.
2. Particularly applicable to laminated, finger-joint, installation, manufacturing and composite floorboard
3. Has good bonding properties for inorganic materials and metal.
Packing:
Base: 20Kg
Curing Agent: 2Kg, 3Kg
Slump
/ mm
≤ 1
Extrudability /ml/min
≥ 80
Tack-free time
/ min
≤ 180
Weight loss on heating
/%
≤ 10
Elastic recovery ratio
/%
≥ 80
Tensile modulus / Mpa (standard conditions)
> 0.4
Tensile properties at maintained extension
No damage
Cohesiveness after UV radiation
No damage
Cohesiveness after hot pressing-cold extending
No damage
Definite elongation cohesiveness after emergence
No damage
PolyCoat 700 Series PP Anti Corrosive anti corrosion Bitumen tape
These PolyCoat 760-780 tapes are used for the renovation of Oil Transmission Lines
PolyUrethane Reactive Hot-Melt Adhesive
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives
Features:
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives.Reactive polyurethane hot melt adhesives (PUR glue), compared with ordinary hot melt adhesives, with excellent overall performance.It combines a common solvent-free hot-melt adhesives, the beginning of the high viscosity, the rapid assembly features such as location, but also has the unique reactive liquid adhesives water resistance, heat resistance, cold resistance, creep resistance and dielectric properties.Its sizing temperature (120 °C) at a level below normal hot-melt adhesive (150-180 °C), can be used in certain plastic parts.
Specification:Appearance: white solid
Viscosity: (A27, 20rpm) 140 °C: 25500pa.s
Density: About 1.28
Opening hours: around 25-55 seconds (3mm Bead 20 °C)
Bond strength (mpa):: ≥ 3.6 ABS / ABS
Equipment, temperature :100 - 150 °C
After curing temperature flexibility: -40 ~ 95 °C
Packing: 500g aluminum foil bag, 2kg / aluminum foil bag, 20kg / drum, 180 kg / drum
Usage: Mainly used in ABS sheet composite bonding
Sizing method: You can type in the exclusive reaction (PUR) hot melt equipment used to
operate a variety of ways.Such as: Manual spray
Transport and storage:
Products in the transport and handling over into the pressure to avoid collisions and to
prevent deformation and breakage due to packaging, which can not be used.
Unopened original packaging in the 5 - 25 °C dry and clean at the storage, can be stored for
6 months.
Update Date:2011-8-10 1:53:26
Features:
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives.Reactive polyurethane hot melt adhesives (PUR glue), compared with ordinary hot melt adhesives, with excellent overall performance.It combines a common solvent-free hot-melt adhesives, the beginning of the high viscosity, the rapid assembly features such as location, but also has the unique reactive liquid adhesives water resistance, heat resistance, cold resistance, creep resistance and dielectric properties.Its sizing temperature (120 °C) at a level below normal hot-melt adhesive (150-180 °C), can be used in certain plastic parts.
Specification:Appearance: white solid
Viscosity: (A27, 20rpm) 140 °C: 25500pa.s
Density: About 1.28
Opening hours: around 25-55 seconds (3mm Bead 20 °C)
Bond strength (mpa):: ≥ 3.6 ABS / ABS
Equipment, temperature :100 - 150 °C
After curing temperature flexibility: -40 ~ 95 °C
Packing: 500g aluminum foil bag, 2kg / aluminum foil bag, 20kg / drum, 180 kg / drum
Usage: Mainly used in ABS sheet composite bonding
Sizing method: You can type in the exclusive reaction (PUR) hot melt equipment used to
operate a variety of ways.Such as: Manual spray
Transport and storage:
Products in the transport and handling over into the pressure to avoid collisions and to
prevent deformation and breakage due to packaging, which can not be used.
Unopened original packaging in the 5 - 25 °C dry and clean at the storage, can be stored for
6 months.
Update Date:2011-8-10 1:53:26
37 Not contain styrene and non-toxic Epoxy Resin joint filler
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
PolyUrethane Reactive Hot-Melt Adhesive
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives
Features:
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives.Reactive polyurethane hot melt adhesives (PUR glue), compared with ordinary hot melt adhesives, with excellent overall performance.It combines a common solvent-free hot-melt adhesives, the beginning of the high viscosity, the rapid assembly features such as location, but also has the unique reactive liquid adhesives water resistance, heat resistance, cold resistance, creep resistance and dielectric properties.Its sizing temperature (120 °C) at a level below normal hot-melt adhesive (150-180 °C), can be used in certain plastic parts.
Specification:Appearance: white solid
Viscosity: (BF # 27/2.5rpm/120 °C): 11000mpa.s
Density: About 1.12
Opening hours: around 50-80 seconds (3mm Bead 20 °C)
Bond strength (mpa):: ≥ 3.6 ABS / ABS
≥ 2.6 A1/A1
Equipment, temperature :110 - 140 °C
After curing temperature flexibility: -40 ~ 95 °C
Packing: 500g aluminum foil bag, 2kg / aluminum foil bag, 20kg / drum, 180 kg / drum
Usage: mainly used in Velcro, fish with rod, lamps, cleaning sponge, mop supplies
Sizing method: You can type in the exclusive reaction (PUR) hot melt equipment used to
operate a variety of ways.Such as: Manual spray gun, pressure disc automatic spray gun,
roller coating, slot clip spraying, spray coating, etc.
Transport and storage:
Products in the transport and handling over into the pressure to avoid collisions and to
prevent deformation and breakage due to packaging, which can not be used.
Unopened original packaging in the 5 - 25 °C dry and clean at the storage, can be stored for
6 months.
Update Date:2011-8-10 1:54:32
Features:
PUR adhesive does not contain water and solvents, solid content 100%, is a high performance environment-friendly adhesives.Reactive polyurethane hot melt adhesives (PUR glue), compared with ordinary hot melt adhesives, with excellent overall performance.It combines a common solvent-free hot-melt adhesives, the beginning of the high viscosity, the rapid assembly features such as location, but also has the unique reactive liquid adhesives water resistance, heat resistance, cold resistance, creep resistance and dielectric properties.Its sizing temperature (120 °C) at a level below normal hot-melt adhesive (150-180 °C), can be used in certain plastic parts.
Specification:Appearance: white solid
Viscosity: (BF # 27/2.5rpm/120 °C): 11000mpa.s
Density: About 1.12
Opening hours: around 50-80 seconds (3mm Bead 20 °C)
Bond strength (mpa):: ≥ 3.6 ABS / ABS
≥ 2.6 A1/A1
Equipment, temperature :110 - 140 °C
After curing temperature flexibility: -40 ~ 95 °C
Packing: 500g aluminum foil bag, 2kg / aluminum foil bag, 20kg / drum, 180 kg / drum
Usage: mainly used in Velcro, fish with rod, lamps, cleaning sponge, mop supplies
Sizing method: You can type in the exclusive reaction (PUR) hot melt equipment used to
operate a variety of ways.Such as: Manual spray gun, pressure disc automatic spray gun,
roller coating, slot clip spraying, spray coating, etc.
Transport and storage:
Products in the transport and handling over into the pressure to avoid collisions and to
prevent deformation and breakage due to packaging, which can not be used.
Unopened original packaging in the 5 - 25 °C dry and clean at the storage, can be stored for
6 months.
Update Date:2011-8-10 1:54:32
Polyamide Hot Melt Adhesive Dimer acid-based
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive HY-208
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
polyamide hot melt adhesives
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
polyamide hot melt adhesives
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Friday, July 29, 2011
Polyamide Hot Melt Adhesive for Electronics & Electrical Machinery
Polyamide Hot Melt Adhesive
1. UL-94V-0
2. For electronic component bonding
3. Heat, chemical resistance
Polyamide Hot Melt Adhesive for Electronics & Electrical Machinery
1. Passed UL-94V-0
2. For electronic component bonding
3. Heat, chemical resistance
*803------- Communication industry, hot melt adhesive film
*863H1----Electronic industry, UL 94V-0 grade retardant glue stick
*TP21------ low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries ‘application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc; very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
1. UL-94V-0
2. For electronic component bonding
3. Heat, chemical resistance
Polyamide Hot Melt Adhesive for Electronics & Electrical Machinery
1. Passed UL-94V-0
2. For electronic component bonding
3. Heat, chemical resistance
*803------- Communication industry, hot melt adhesive film
*863H1----Electronic industry, UL 94V-0 grade retardant glue stick
*TP21------ low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries ‘application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc; very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
Polyamide Hot Melt Adhesive for Low-Pressure Injection Forming
Polyamide Hot Melt Adhesive for Low-Pressure Injection Forming
1. UL 94V-0 grade standard
2. good heat resistance 150 degree
Polyamide Hot Melt Adhesive for Low Pressure Injection Forming
Application Scopes:
* Automobiles: heat resistant glue stick/ wire fixing/ component bonding/ fiber bonding
* Electronics / Electrical Industry: UL94V0 Halogen-free hot melt glue stick/ electronic components fixing/ planar and jumper cable fixing/ filling
* Low-pressure injection forming: sealing, cable, cell phone battery, connector, which has very good performance at electronic insulation and humidity and dust resistance.
Part number: H-SW9870
Base
synthetic resin
Solid content
100%
Shape
stick, granule
Color
crystal yellow, black
Diameter
11/7mm (length 270/300mm)
Odour
none
Softening Point (°C)
165±5
180°C Viscosity (cps)
8000±2000
7500±2000
Setting Time (sec)
3-8
Toxicity
none
Storage Stability
packaging 1 year minimum.
Attention:
1. Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure.
2. Please store the adhesive in well ventilated place. Avoid direct sunlight exposure.
1. UL 94V-0 grade standard
2. good heat resistance 150 degree
Polyamide Hot Melt Adhesive for Low Pressure Injection Forming
Application Scopes:
* Automobiles: heat resistant glue stick/ wire fixing/ component bonding/ fiber bonding
* Electronics / Electrical Industry: UL94V0 Halogen-free hot melt glue stick/ electronic components fixing/ planar and jumper cable fixing/ filling
* Low-pressure injection forming: sealing, cable, cell phone battery, connector, which has very good performance at electronic insulation and humidity and dust resistance.
Part number: H-SW9870
Base
synthetic resin
Solid content
100%
Shape
stick, granule
Color
crystal yellow, black
Diameter
11/7mm (length 270/300mm)
Odour
none
Softening Point (°C)
165±5
180°C Viscosity (cps)
8000±2000
7500±2000
Setting Time (sec)
3-8
Toxicity
none
Storage Stability
packaging 1 year minimum.
Attention:
1. Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure.
2. Please store the adhesive in well ventilated place. Avoid direct sunlight exposure.
Polyamide Hot Melt Adhesive for making shoes
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive for shoes making and so on
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive for shoes making
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive for shoes making
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive for shoes making
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
39 Modified Epoxy Resin concrete construction sealant glue for Planting Stud Bolt
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Polyamide Hot Melt Adhesive for shoes making
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
hot melt adhesive
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
hot melt adhesive
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive for shoes
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive glue HY-208
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive glue
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Hot melt adhesive
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Hot melt adhesive
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive
Polyamide Hot Melt Adhesive
1. UL 94V-0
2. heat resistant
3. for shoes,electric, automobile,Electronics
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
The characteristics of Polyamide Hot Melt Adhesive are heat resistance and UL 94V-0 grade flame retardant.
Major applications of Polyamide Hot Melt Adhesive described as follows:
* Automobiles: heat resistant glue stick/ wire fixing/ component bonding/ fiber bonding
* Shoes industries: shoe toe puff adhesive/ upper vamp bonding adhesive/ lasting adhesive
* Electronics / Electrical Industry: UL94V0 Halogen-free hot melt glue stick/ electronic components fixing/ planar and jumper cable fixing/ filling
* Low-pressure injection forming: sealing, cable, cell phone battery, connector, which has very good performance at electronic insulation and humidity and dust resistance
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
1. UL 94V-0
2. heat resistant
3. for shoes,electric, automobile,Electronics
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
The characteristics of Polyamide Hot Melt Adhesive are heat resistance and UL 94V-0 grade flame retardant.
Major applications of Polyamide Hot Melt Adhesive described as follows:
* Automobiles: heat resistant glue stick/ wire fixing/ component bonding/ fiber bonding
* Shoes industries: shoe toe puff adhesive/ upper vamp bonding adhesive/ lasting adhesive
* Electronics / Electrical Industry: UL94V0 Halogen-free hot melt glue stick/ electronic components fixing/ planar and jumper cable fixing/ filling
* Low-pressure injection forming: sealing, cable, cell phone battery, connector, which has very good performance at electronic insulation and humidity and dust resistance
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
Polyamide Hot Melt Adhesive
Polyamide Hot Melt Adhesive
1. passed UL 94V-0
2. heat and chemical resistance
3. for shoes,electric, automobile industries
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
1. passed UL 94V-0
2. heat and chemical resistance
3. for shoes,electric, automobile industries
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
Polyamide Hot Melt Adhesive
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive
Characteristic :
Under normal temperature, its apperence is light yellow granular substance. Avirulence, nonirritating,
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point()
100-180
ColorFe-co
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2)
≥100
Packing: The paper and plastic bag, 25KG/bag.
Under normal temperature, its apperence is light yellow granular substance. Avirulence, nonirritating,
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point()
100-180
ColorFe-co
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2)
≥100
Packing: The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Adhesive
Polyamide Hot Melt Adhesive
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
1.good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
HY-208
(hot melt adhesive)
Polyamide Hot melt Adhesive
formed by the high-temperature condensation reaction
of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
Properties:
1.Good flow performance.
2.Excellent flexility and low viscosity.
3.Strong cohesive force.
Application:
Hot melt adhesive as seal material in electronic components, decoration in automobile.
Hot melt adhesive of shoes, fabric, wood, plastic, metal and ceramic.
Hot melt adhesive of packing material, and so on.
Specification:
Style
HY-208(Hot Melt Adhesive)
Acid Value(mgKOH/g)
≤10
Amine Value(mgKOH/g)
≤8
Viscosity(mpa.s/160)
2000-6000
Softening Point(°C)
100-180
Color(Fe-co)
≤8
Water absorption (%)
≤0.5
Shear strength(mps, AL/AL)
≥4
Peeling strength(N/25mm,PE/PE,60±2°C)
≥100
Packing:
The paper and plastic bag, 25KG/bag.
Polyamide Hot Melt Glues
Polyamide Hot Melt Adhesive
1. passed UL 94V-0
2. heat and chemical resistance
3. for shoes,electric, automobile industries
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
1. passed UL 94V-0
2. heat and chemical resistance
3. for shoes,electric, automobile industries
Polyamide Hot Melt Adhesive
One kind of glue for electric, automotive, communication, and shoe industries application. The glue stick for electric, automotive, and communication industry use is made with one kind of high temperature and high strength polyamide based material. Our product passed the UL 94V-0 grade retardant test (File No 209485). They are suitable for electronic component bonding use and have very good performance in heat and chemical resistance.
The glue for shoe toe puff use is with good stiffness and no fiber foaming, suitable to bond natural and all kind of artificial leather materials.
The glue for low pressure injection forming application is suitable for kinds of electric and automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
List of Tex Year Polyamide Hot Melt Adhesive
Product Code
Property Description
Industry Category
802
Automotive industry: interior fixing glue.
Car Industry
803
Communication industry, hot melt adhesive film
Electronics & Electrical Machinery
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
868
Shoe industry: shoe toe puff use is suitable to bond natural and all kind of artificial leather materials.
Shoe Making
TP-21
low pressure injection forming application and suitable for kinds of electric/automotive industries such as sealing, cable, cell phone battery, connector, and etc. Very good performance at electronic insulation and water or humidity proof.
Electronics & Electrical Machinery
39 Not contain styrene and non-toxic Epoxy Resin Injective glue
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Polyamide Resin
Polyamide Resin,co-solvent resin for printing ink.
Polyamide Resin
Polyamide resin alcohol soluble:
Product name : Polyamide resin BA011 (Co-solvent soluble)
Cas No.: 63428-84-2
Characteristics :
Benzene soluble(Co-solvent soluble) polyamide resin is developed accommodating to the market requirement. It has good stability, good solvent liberation, strong bending flexure, marvelous glossiness, strong adhesive power, fine gel resistance and indoor temperature turn-frost.
Application: widely used in various printing fields, such as gravure printing ink, paper or plastic film printing ink and cover glass oil.
Feature: excellent solvent release, good adhesion.
Specifications :
AMINE VALUE(mgkoH/g) 4 max
ACID VALUE (mgkoH/g) 4 max
COLOR SCALE (Fe-Co) 10max
VISCOSITY(CP/25 ) 100-260
SOFTENING POINT (°C) 105 – 115
Packing:
25kg net per bag, 24bag per pallet, 20pallet / 1x20gp.
Storage:
in cool, dry, ventilated warehouse.
Polyamide Resin
Polyamide resin alcohol soluble:
Product name : Polyamide resin BA011 (Co-solvent soluble)
Cas No.: 63428-84-2
Characteristics :
Benzene soluble(Co-solvent soluble) polyamide resin is developed accommodating to the market requirement. It has good stability, good solvent liberation, strong bending flexure, marvelous glossiness, strong adhesive power, fine gel resistance and indoor temperature turn-frost.
Application: widely used in various printing fields, such as gravure printing ink, paper or plastic film printing ink and cover glass oil.
Feature: excellent solvent release, good adhesion.
Specifications :
AMINE VALUE(mgkoH/g) 4 max
ACID VALUE (mgkoH/g) 4 max
COLOR SCALE (Fe-Co) 10max
VISCOSITY(CP/25 ) 100-260
SOFTENING POINT (°C) 105 – 115
Packing:
25kg net per bag, 24bag per pallet, 20pallet / 1x20gp.
Storage:
in cool, dry, ventilated warehouse.
Polyamide Resin
Polyamide Resin,
1, alcohol soluble
2, co-solvent soluble
Polyamide Resin
Polyamide resin alcohol soluble & co-solvent soluble is mainly used for :
Uses :
1. Printing ink.
2. Heating seal beaded paint 3. Cover glass oil
Pls contact us for details if you interested in this one, thank you in advance.
1, alcohol soluble
2, co-solvent soluble
Polyamide Resin
Polyamide resin alcohol soluble & co-solvent soluble is mainly used for :
Uses :
1. Printing ink.
2. Heating seal beaded paint 3. Cover glass oil
Pls contact us for details if you interested in this one, thank you in advance.
Polyamide hot melt adhesive (HY-208)
Good sptability of quality and producing capacity, excellent impact strength, moldability and paintability, fair heat resistance
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive (HY-208)
Good stability of quality and producing capacity, excellent impact strength, moldability and paintability, fair heat resistance,
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive HY-208 making shoes
Good stability of quality and producing capacity, excellent impact strength, moldability and paintability, fair heat resistance,
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive film(H1001f)
1.Name:hot melt adhesive film
2.Material:Polyamide
3.Thickness:60-200microns
4.Width:10cm-100cm
5.Mobile:0086-18939758527
Polyamide hot melt adhesive film
Type: H1001f
Component: polyamide
Color: Subtransparent
Thickness: 0.06mm-0.18mm
Width: 10cm-100cm
Feture: transparencysoft hand;high bond intensity;excellent resistance to dry cleaning and 40 laundrying. The product has passed SGS environmental supervision and excludes toluene.It is non-toxic and environmentally friendly.
Substrates: electric materialsmetalsvarious kinds of fabrics and other kinds of materials.It has special bond effect in all cotton and other heat sensitivity fabric materials.
Application field:embroidery,automotive uphostlery,kinds of labels,interior decoration, thermal and sound insulating materials,electric industries ,various fabrics,non-woven and other fields.
·Operating data sheet
Melt Range
()
Bonding condition
Resistance to
Temp()
Press barkg/cm2
Time(s)
Water
Dry
105-115
125-145
0.3-0.5
10-20
40
Excellent
Excellent
2.Material:Polyamide
3.Thickness:60-200microns
4.Width:10cm-100cm
5.Mobile:0086-18939758527
Polyamide hot melt adhesive film
Type: H1001f
Component: polyamide
Color: Subtransparent
Thickness: 0.06mm-0.18mm
Width: 10cm-100cm
Feture: transparencysoft hand;high bond intensity;excellent resistance to dry cleaning and 40 laundrying. The product has passed SGS environmental supervision and excludes toluene.It is non-toxic and environmentally friendly.
Substrates: electric materialsmetalsvarious kinds of fabrics and other kinds of materials.It has special bond effect in all cotton and other heat sensitivity fabric materials.
Application field:embroidery,automotive uphostlery,kinds of labels,interior decoration, thermal and sound insulating materials,electric industries ,various fabrics,non-woven and other fields.
·Operating data sheet
Melt Range
()
Bonding condition
Resistance to
Temp()
Press barkg/cm2
Time(s)
Water
Dry
105-115
125-145
0.3-0.5
10-20
40
Excellent
Excellent
Polyamide hot melt adhesive
hot melt adhesive
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive
hot melt adhesive
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive
hot melt adhesive
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesive
hot melt adhesive
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
39 Not contain styrene and non-toxic granite adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Thursday, July 28, 2011
Polyamide hot melt adhesive
hot melt adhesive
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
1.good stability of quality
2.excellent impact strength, moldability and paintability
3.fair heat resist
Hot melt adhesive HY-208:
Hot melt adhesive HY-208:
1) Apperance:
light yellow granular substance
2) Characteristic:
Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolve in general organic solvent. Its melt viscosity has great relationship with the temperature. low viscosity, good flow performance, excellent flexility, and strong cohesive force.
3) Use:
coating, electronic component, air cleaner, fabric, textile, leather, lumber, plastic, shoes, metal, pottery and so on.
4) Specification:
Acid(mgKOH/g): ≤10
Amine(mgKOH/g): ≤8
Viscosity(mpa.s/25 ): 100-180
Softening point():100-120
Color(Fe-co):≤10
Water absorption(%): 0.5
Shear strength(mps,AL/AL): ≥4
Peeling strength(N/25mm,PE/PE,60±2): ≥100
4)Packing:
the paper and plastic bag, 25KG/bag.
5) Qty/20'FCL:
15mt, 600bags (without pallet)
Polyamide hot melt adhesives powder
1.Brand:Farseeing
2.Item:Polyamide hot melt adhesives powder
3.Mobile:0086-18939758527
4.Material:COPA
5.Spec:H1002p
polyamide hot melt adhesives powder(H1001p)
Imports of raw materials and use of advanced production technology and make products with peel strength, resistance dry cleaning, washing and strong performance, mainly used in hot drilling industry, sequins gum, wig adhesives, hot-melt transfer printing industry products require low-temperature, high-grade garments Interlinings two-point spread powder, all kinds of leather, cotton , wool and linen fabrics, such as nonwoven fabrics and bonding between.
Type
Mate
rial
Melt
Range
Meltflow rate
g/10min @160
Melt viscosity
Pa.s@
160
Bonding
condition
restance to
Form
temp
press bar
kg/cm2
time
s
water
dry
H1002
Co-PA
95-110
60
150
120-135
0.5-1.5
5-20
60
+++
P
Particle Size:
Powder:0-80μm,0-120μm,0-160μm,80-170μm,120-200μm,150-250μm,250-420μm
Tel:0086-18939758527
Mobile:0086-18939758527
2.Item:Polyamide hot melt adhesives powder
3.Mobile:0086-18939758527
4.Material:COPA
5.Spec:H1002p
polyamide hot melt adhesives powder(H1001p)
Imports of raw materials and use of advanced production technology and make products with peel strength, resistance dry cleaning, washing and strong performance, mainly used in hot drilling industry, sequins gum, wig adhesives, hot-melt transfer printing industry products require low-temperature, high-grade garments Interlinings two-point spread powder, all kinds of leather, cotton , wool and linen fabrics, such as nonwoven fabrics and bonding between.
Type
Mate
rial
Melt
Range
Meltflow rate
g/10min @160
Melt viscosity
Pa.s@
160
Bonding
condition
restance to
Form
temp
press bar
kg/cm2
time
s
water
dry
H1002
Co-PA
95-110
60
150
120-135
0.5-1.5
5-20
60
+++
P
Particle Size:
Powder:0-80μm,0-120μm,0-160μm,80-170μm,120-200μm,150-250μm,250-420μm
Tel:0086-18939758527
Mobile:0086-18939758527
Polyamide hot-melt adhesive
100% polyamide resin.Good adhesiveness,Good high and low temperature resistance,Good oil resistance
Product Composition:
·
100% polyamide resin.
Features:
·
Good adhesiveness, adheres to most surfaces with high bonding strength.
·Good high and low temperature resistance, and have excellent thermal stability
·Good oil –resistance and good electric insulation
·Have lower viscosity at melting condition
·100% solid, no pollution and toxicity.
·Specially formulated for low pressure molding
Specifications:
·Appearance Amber pellet
·Melting point 170~185°C
·Melting viscosity(mPa.s/210oC) 1000~7000
·Glass transition temperature(°C) ≤-30
·Elongation at break(%) ≥500
Operation:
·KW180 hot melt adhesive is easy to use, and has short setting time.It is suitable to most of application machine. Application temperature is 200~240°C.
Packing:
·Packed in 20kg or 25kg plastic bag with woven package.
Storage:
·KW180 hot melt adhesive is stable for one year if stored in a dry and ventilated place at room temperature, and kept away from light.
Update Date:2011-8-10 1:41:52
Product Composition:
·
100% polyamide resin.
Features:
·
Good adhesiveness, adheres to most surfaces with high bonding strength.
·Good high and low temperature resistance, and have excellent thermal stability
·Good oil –resistance and good electric insulation
·Have lower viscosity at melting condition
·100% solid, no pollution and toxicity.
·Specially formulated for low pressure molding
Specifications:
·Appearance Amber pellet
·Melting point 170~185°C
·Melting viscosity(mPa.s/210oC) 1000~7000
·Glass transition temperature(°C) ≤-30
·Elongation at break(%) ≥500
Operation:
·KW180 hot melt adhesive is easy to use, and has short setting time.It is suitable to most of application machine. Application temperature is 200~240°C.
Packing:
·Packed in 20kg or 25kg plastic bag with woven package.
Storage:
·KW180 hot melt adhesive is stable for one year if stored in a dry and ventilated place at room temperature, and kept away from light.
Update Date:2011-8-10 1:41:52
Polycarboxylate Superplasticizer (concrete additive)
1.White powder
2.New modified superplasticizer
3.Low gas content,better dispersion
4.moisture content (powder)(%):<3
Polycarboxylate Superplasticizer
1.Appearance:
white powder
2.Field of Application:
.Impervious insulation mortar , plaster products, self-leveling floors, filling materials, grouting materials, etc.;
.High-strength concrete, high fluidity concrete, high durable concrete, aluminate cement refractory concrete, low cement castables, steam-cured concrete, etc.; especially suitable for dry powder mixed with building materials dispersing agent;
3.Physical characteristics and use of dosage:
appearance
white powder
moisture content (powder)(%)
<3
pH value(20°C)(20% liquid)
6~8
total alkalinity(%)
<5
chloride ion content(%)
<0.03
4.Use,storage and transportation:
Be careful not to touch the product to the eyes, mouth and skin, recommended the use of protective gloves and glasses. If not carefully stained, rinse with plenty of water is stained section.
Powder is easy to absorb moisture and should be stored in sealed original bag, and placed in a dry place. Temperature should not exceed 40 °C, not stacked too high.
Handling must be gently to prevent damage, avoid moisture during transportation.
RO-JS
are
non-toxic, non-irritating, non-combustible
products.
Shelf life: 10 months.
Company Address
Room 509,Floor 5,Jiman Business Center,Street No. 3233,Road Zhenbei,District Putuo,Shanghai
Cnn: michelle chen
Tel.: 0086-21-62503072
Fax: 0086-21-62503076
2.New modified superplasticizer
3.Low gas content,better dispersion
4.moisture content (powder)(%):<3
Polycarboxylate Superplasticizer
1.Appearance:
white powder
2.Field of Application:
.Impervious insulation mortar , plaster products, self-leveling floors, filling materials, grouting materials, etc.;
.High-strength concrete, high fluidity concrete, high durable concrete, aluminate cement refractory concrete, low cement castables, steam-cured concrete, etc.; especially suitable for dry powder mixed with building materials dispersing agent;
3.Physical characteristics and use of dosage:
appearance
white powder
moisture content (powder)(%)
<3
pH value(20°C)(20% liquid)
6~8
total alkalinity(%)
<5
chloride ion content(%)
<0.03
4.Use,storage and transportation:
Be careful not to touch the product to the eyes, mouth and skin, recommended the use of protective gloves and glasses. If not carefully stained, rinse with plenty of water is stained section.
Powder is easy to absorb moisture and should be stored in sealed original bag, and placed in a dry place. Temperature should not exceed 40 °C, not stacked too high.
Handling must be gently to prevent damage, avoid moisture during transportation.
RO-JS
are
non-toxic, non-irritating, non-combustible
products.
Shelf life: 10 months.
Company Address
Room 509,Floor 5,Jiman Business Center,Street No. 3233,Road Zhenbei,District Putuo,Shanghai
Cnn: michelle chen
Tel.: 0086-21-62503072
Fax: 0086-21-62503076
Polychloroprene adhesive
good intial repulsive force;
light color in surface;
suit for white shoes.
light yellow or semi-transparent viscous liquid;
viscosity: 5000~6000;
excellent initial repulsive force;
for wrapping, lining, wood, etc.
light color in surface;
suit for white shoes.
light yellow or semi-transparent viscous liquid;
viscosity: 5000~6000;
excellent initial repulsive force;
for wrapping, lining, wood, etc.
Polyethylene Anti-corrosion Tapes (T 100)
For corrosion protection of Oil, Petrochemical, and Waste Water undergrand or overhead pipelines
Easy to use
cost-effective
The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The
inner-layer tape
shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
T
echnical datas
INNER WRAP TAPE: XUNDA-T 100 Series
Type
T-150
T-165
T-180
Total thickness
0.51 mm
0.65 mm
0.80 mm
Polyethylene Film
0.31 mm
0.34 mm
0.39 mm
Synthetic Adhesive
0.20 mm
0.31 mm
0.41 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
51.2 N/cm
64.5 N/cm
Yield Strength
35.5 N/cm
42.3 N/cm
45.5 N/cm
Peel Adhesion to Primed Pipe
21.2 N/cm
26.5 N/cm
33.2 N/cm
Dielectric Strength
35 KV/mm
45.8 KV/mm
48 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.1gm/M
2
/24h
Water Absorption Rate
< 0.06%
Recommended Application Temperature
-5 to +60
0
C
Max Serve Temperature
-40 to + 80
0
C
Color
Black
Available Roll Size (width x length)
2" to 9" X 50 to800 feet
Easy to use
cost-effective
The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The
inner-layer tape
shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
T
echnical datas
INNER WRAP TAPE: XUNDA-T 100 Series
Type
T-150
T-165
T-180
Total thickness
0.51 mm
0.65 mm
0.80 mm
Polyethylene Film
0.31 mm
0.34 mm
0.39 mm
Synthetic Adhesive
0.20 mm
0.31 mm
0.41 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
51.2 N/cm
64.5 N/cm
Yield Strength
35.5 N/cm
42.3 N/cm
45.5 N/cm
Peel Adhesion to Primed Pipe
21.2 N/cm
26.5 N/cm
33.2 N/cm
Dielectric Strength
35 KV/mm
45.8 KV/mm
48 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.1gm/M
2
/24h
Water Absorption Rate
< 0.06%
Recommended Application Temperature
-5 to +60
0
C
Max Serve Temperature
-40 to + 80
0
C
Color
Black
Available Roll Size (width x length)
2" to 9" X 50 to800 feet
Subscribe to:
Posts (Atom)