Clear PVC Adhesive

PVC Glue is suitable for rigid PVC pipe, U-PVC pipe, CPVC pipe and pipe fittings.


PVC Glue is especially suitable for rigid PVC pipe, U-PVC pipe, CPVC pipe and pipe fittings of inlet pipeline and drainage pipeline and also for ABS polymethyl-methacrylate. It has many fine characteristic, such as the pressure resistance, heat-resisting, acid and alkali resisting.
1. Moderate viscosity: solid content ≥15%, viscosity≥700mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline.≤3.
2. High viscosity: solid content ≥20%, viscosity≥1000mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline≥3.
The glue should be stored in cool, dry and ventilated places with cover sealed. Keep away
Sample Name
PVC Glue
Base Figure
Test Items
Examine Definite Value
Appearance
Clear , Transparent, Light yellow thick liquid
Solid Content (%)
≥20
Viscosity(25,MPA.s)
1200-1500
PH value
6-8
Peel Strengthen
(25*48h,canvas-canvas N/2.5cm)
≥6.2
Drying Time
5-25minutes25
Shelf Life
18months
Direction:
1. Use sandpaper to make the surface of pipe or pipe fitting rough, chamfered edge.
2. The grease, smirch of the contacted surface must be cleaned off by acetone.
3. Both sides of the material must be applied the glue. The inserting side of pipeline reverses 90°, in order to make its contact face have well-proportioned glue, then positioning.
4. This U-PVC glue confirms to the technical standard of GB3024-82.
Storage:
The glue should be stored in cool, dry and ventilated places with cover sealed. Keep away from high temperature and fire. The container should be sealed tightly.