adhesive glue cyanoacrylate glue 502 glue
Quickly strong viscous.
Reasonable price ,good quality
Various designs of cards
Factory direct, competitive price, good quality.
Applied to wood, plastic, ceramic, rubber, metal, electrical appliances, sport goods, automobile accessories, etc
Super Glue also called Cyanoacrylate Adhesives or Krazyglue, is one-component, fast-curing adhesive, available in a range of viscosities for every application. It bonds metal, rubber, plastic, and all combinations in 10-30 seconds without any need for fix.General-purpose type or stay-in-place gels for vertical or inverted surfaces that fill gaps from 0.1 to 0.25mm. Temperature resistance ranges from-50 degrees to 80 degrees celsius.
It has an amazing new multi-purpose quick bonding power applied to a variety of materials e.g.wood, plastic, ceramic, rubber, metal, electrical appliances, sport goods, automobile accessories, etc.
Make sure the nozzle is wiped clean after every use. Fasten the cap tightlyIf nozzle become blocked, use a needle or pin to clear it;
Store at a cool and dry place;
CAUTION
Eyes contact, clean them with water and seek medical advices soon;
Swallowed, induce vomit and see a doctor immediately;
Keep it out of reach of children.
Saturday, September 24, 2011
Cyanoacrylate hardening agent / for super glue
Cyanoacrylate hardening agent / for super glue
1. Cyanoacrylate hardening agent
2. Accelerate hardening and prevent blooming
Cyanoacrylate hardening agent / for 3 seconds® super glue
Product Description:
1. 170ml
2. Cyanoacrylate hardening agent
3. Accelerate hardening and prevent blooming
Related special chemicals for 3 seconds® super Glue
Product includes low-blooming primer, difficult surface primer, cyanoacrylate adhesive remover. Low-blooming primer not only reduce blooming but expedite curing time. Thee seconds® electronic low-blooming gel will protect your parts from blooming.
List of Tex Year Super Glue
Product Code
Property Description
Industry Category
TY-1BN
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-1N
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-2N
(20g)
General purpose, low viscosity type. Ideal for general assembly, repair, model and household DIY pupose
DIY/ Family
TY-2N
(20g)
Ideal for plastic surface, low viscosity type
Woodworking / Construction Material
TY-5AN
(20g)
Ideal for porous surface, high viscosity type
Assembly,Woodworking / Construction Material
TY-5N
(20g)
Ideal for porous surface, medium viscosity type
Woodworking / Construction Material
TY-7AN
(20g)
Ideal for porous surface, low/medium viscosity
DIY/ Family
TY-GN
(20g)
Gel type. Ideal for ceramics and rubber plastic
DIY/ Family
1. Cyanoacrylate hardening agent
2. Accelerate hardening and prevent blooming
Cyanoacrylate hardening agent / for 3 seconds® super glue
Product Description:
1. 170ml
2. Cyanoacrylate hardening agent
3. Accelerate hardening and prevent blooming
Related special chemicals for 3 seconds® super Glue
Product includes low-blooming primer, difficult surface primer, cyanoacrylate adhesive remover. Low-blooming primer not only reduce blooming but expedite curing time. Thee seconds® electronic low-blooming gel will protect your parts from blooming.
List of Tex Year Super Glue
Product Code
Property Description
Industry Category
TY-1BN
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-1N
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-2N
(20g)
General purpose, low viscosity type. Ideal for general assembly, repair, model and household DIY pupose
DIY/ Family
TY-2N
(20g)
Ideal for plastic surface, low viscosity type
Woodworking / Construction Material
TY-5AN
(20g)
Ideal for porous surface, high viscosity type
Assembly,Woodworking / Construction Material
TY-5N
(20g)
Ideal for porous surface, medium viscosity type
Woodworking / Construction Material
TY-7AN
(20g)
Ideal for porous surface, low/medium viscosity
DIY/ Family
TY-GN
(20g)
Gel type. Ideal for ceramics and rubber plastic
DIY/ Family
17 Not contain styrene and non-toxic Epoxy Resin joint filler
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
Cylindrical part Retaining Anaerobic Adhesive
1 Retaining Anaerobic Adhesive
2 Press fit Oily solution
3 High Strength
4 Gaps fill 0.13mm
5 Anti-wear
Retaining Anaerobic Adhesive
Product Introduction
Ausbond® A603 is a kind of anaerobic column hole/shaft fit parts retaining adhesive with single component, high strength, universality and low viscosity.Cure between two closely metal surfaces when isolated with air.
Typical Purposes
Used for the surface with oil, and also sued for inert surface.Used for hole/shaft fit parts retaining with radial clearance less than 0.13mm.
Package Specification
50ml/bottle, 250ml/bottle.
Storage Conditions
Store in the cool and dry place under 8~28°C.Shelf Life: 24 months.
2 Press fit Oily solution
3 High Strength
4 Gaps fill 0.13mm
5 Anti-wear
Retaining Anaerobic Adhesive
Product Introduction
Ausbond® A603 is a kind of anaerobic column hole/shaft fit parts retaining adhesive with single component, high strength, universality and low viscosity.Cure between two closely metal surfaces when isolated with air.
Typical Purposes
Used for the surface with oil, and also sued for inert surface.Used for hole/shaft fit parts retaining with radial clearance less than 0.13mm.
Package Specification
50ml/bottle, 250ml/bottle.
Storage Conditions
Store in the cool and dry place under 8~28°C.Shelf Life: 24 months.
Cynoacrylate adhesive
1)Cynoacrylate adhesive
2)Certification:ISO9001(2000),ISO14001(2004),MSDS .
3)Good quality and best price
Packing
Packed in plastic barre of 25kg or 20kg,and then per barrel in a carton.
Quality Grade
SY (SY grade is the best quality of glue).
Appearance
Colorless transparent liquid.
Setting time
Rapid:3seconds Standard:3-10seconds Slow:20seconds
Shelf life
Rapid:6-7months Standard:10months Slow:12months
Usuage
Wood, PVC plastic, Ceramics, Leather, Timber, Articles, Arts and Crafts, Appliance, Accessories, Hardware and ect.
Characteristic
Low white,and no yellow for wood use.
Attention:Keep glue sealed, cool and keep them in dry condition, and no additive,thus the shelflife can be guaranteed.
2)Certification:ISO9001(2000),ISO14001(2004),MSDS .
3)Good quality and best price
Packing
Packed in plastic barre of 25kg or 20kg,and then per barrel in a carton.
Quality Grade
SY (SY grade is the best quality of glue).
Appearance
Colorless transparent liquid.
Setting time
Rapid:3seconds Standard:3-10seconds Slow:20seconds
Shelf life
Rapid:6-7months Standard:10months Slow:12months
Usuage
Wood, PVC plastic, Ceramics, Leather, Timber, Articles, Arts and Crafts, Appliance, Accessories, Hardware and ect.
Characteristic
Low white,and no yellow for wood use.
Attention:Keep glue sealed, cool and keep them in dry condition, and no additive,thus the shelflife can be guaranteed.
D2 PVA White Glue
D2 white glue
Low solid content and viscosity white glue,for hands crafts assembly,decoration papers bonding and wood bonding.
D2 white glue
Description :
a)VicBond
D2 white glue is low viscosity high strength self-crosslinking ,Made of polyvinyl acetate emulsion material,meeting EN 204 D2 water resistance standard.
b)VicBond D2 white glue is homo-polymer emulsion & on drying cross links to form water resistant films.
Features:
a)Item name:TY-500 D2 white glue
b)Type:crosslinking PVA
c)Viscosity: 9000-21000Pa.s
d)Solids content: 44-46%
e)Shape:Milky white
f)Water resistance type:D3 and Type II
g)Formaldehyde: <19mg/kg
h)PH(25°C) 2.5-4.
Application:
TY-500 D2 white glue is suitable for arts&crafts assembly and bonding,also for decoration papers bonding,especailly fro picture frame assembly and video at the angle of 45 degrees,morever for plywood ,MDF edge-bonding.
Characteristics:
a) Speedy drying
b) Long storage time
c) Super adhering ability
d) Easy application
e) Freezing and rot-resistant
f) Waterproof
g) Environmental-friendly and nontoxic
Storage condition
Please keep in cool place, avoiding direct sunlight or overheating.
Expiry time12 months.
Shelf Life
1 Year in right temperature and environment
Other trade terms
a)MOQ:5000KG
b)Payment terms:40% T/T first,60% rest paid on the sight of bill of lading.
c)FOB SHANTOU PORT
d)Packing:4kg,5kg,20kg,50kg,100kg,200kg
Low solid content and viscosity white glue,for hands crafts assembly,decoration papers bonding and wood bonding.
D2 white glue
Description :
a)VicBond
D2 white glue is low viscosity high strength self-crosslinking ,Made of polyvinyl acetate emulsion material,meeting EN 204 D2 water resistance standard.
b)VicBond D2 white glue is homo-polymer emulsion & on drying cross links to form water resistant films.
Features:
a)Item name:TY-500 D2 white glue
b)Type:crosslinking PVA
c)Viscosity: 9000-21000Pa.s
d)Solids content: 44-46%
e)Shape:Milky white
f)Water resistance type:D3 and Type II
g)Formaldehyde: <19mg/kg
h)PH(25°C) 2.5-4.
Application:
TY-500 D2 white glue is suitable for arts&crafts assembly and bonding,also for decoration papers bonding,especailly fro picture frame assembly and video at the angle of 45 degrees,morever for plywood ,MDF edge-bonding.
Characteristics:
a) Speedy drying
b) Long storage time
c) Super adhering ability
d) Easy application
e) Freezing and rot-resistant
f) Waterproof
g) Environmental-friendly and nontoxic
Storage condition
Please keep in cool place, avoiding direct sunlight or overheating.
Expiry time12 months.
Shelf Life
1 Year in right temperature and environment
Other trade terms
a)MOQ:5000KG
b)Payment terms:40% T/T first,60% rest paid on the sight of bill of lading.
c)FOB SHANTOU PORT
d)Packing:4kg,5kg,20kg,50kg,100kg,200kg
D2 White Adhesive
D2 assembly white adhesive
Low formaldehyde content and low smell ,used for small wood edge-gluing and wood block laminate.
D2 assembly white adhesive
Description :
a)Easy sanding,good initial tack,good solvent and heat resistance,fast setting,harder film.
b)VicBond
D2 white adhesive is low viscosity ,low solid content ,Made of polyvinyl acetate emulsion material,meeting EN 204 D2 water resistance standard.
c)VicBond D2 adhesive is a low viscosity homo-polymer emulsion & on drying cross links to form water resistant films.
Features:
a)Item Name:TY-35 white adhesive
b)Type:crosslinking PVA
c)Viscosity: 9000-15000Pa.s
d)Solids content: 38-42%
e)Shape:Milky white
f)Water resistance type:D2 and Type II
g)Formaldehyde: <19mg/kg
h)PH(25°C) 2.5-4.
Application:
a)VicBond D2 white adhesive is self-crosslinking white adhesive for joining wood ,for bonding furniture internal structures, paneling, doors, windows lamination
b)Used in indoor ,for furniture assembly,small wood edge-bonding ,gluing ,also for wood block laminating,morever for decoration paper bonding,arts&crafts assembly,picture frame and video assembly.
Characteristics:
a) Speedy drying
b) Long storage time
c) Super adhering ability
d) Easy application
e) Freezing and rot-resistant
f) Waterproof
g) Environmental-friendly and nontoxic
Storage condition
Please keep in cool place, avoiding direct sunlight or overheating.
Expiry time12 months.
Shelf Life
1 Year in right temperature and environment
Other trade terms
a)MOQ:5000KG
b)Payment terms:40% T/T first,60% rest paid on the sight of bill of lading.
c)FOB SHANTOU PORT
d)Packing:4kg,5kg,20kg,50kg,100kg,200kg
Low formaldehyde content and low smell ,used for small wood edge-gluing and wood block laminate.
D2 assembly white adhesive
Description :
a)Easy sanding,good initial tack,good solvent and heat resistance,fast setting,harder film.
b)VicBond
D2 white adhesive is low viscosity ,low solid content ,Made of polyvinyl acetate emulsion material,meeting EN 204 D2 water resistance standard.
c)VicBond D2 adhesive is a low viscosity homo-polymer emulsion & on drying cross links to form water resistant films.
Features:
a)Item Name:TY-35 white adhesive
b)Type:crosslinking PVA
c)Viscosity: 9000-15000Pa.s
d)Solids content: 38-42%
e)Shape:Milky white
f)Water resistance type:D2 and Type II
g)Formaldehyde: <19mg/kg
h)PH(25°C) 2.5-4.
Application:
a)VicBond D2 white adhesive is self-crosslinking white adhesive for joining wood ,for bonding furniture internal structures, paneling, doors, windows lamination
b)Used in indoor ,for furniture assembly,small wood edge-bonding ,gluing ,also for wood block laminating,morever for decoration paper bonding,arts&crafts assembly,picture frame and video assembly.
Characteristics:
a) Speedy drying
b) Long storage time
c) Super adhering ability
d) Easy application
e) Freezing and rot-resistant
f) Waterproof
g) Environmental-friendly and nontoxic
Storage condition
Please keep in cool place, avoiding direct sunlight or overheating.
Expiry time12 months.
Shelf Life
1 Year in right temperature and environment
Other trade terms
a)MOQ:5000KG
b)Payment terms:40% T/T first,60% rest paid on the sight of bill of lading.
c)FOB SHANTOU PORT
d)Packing:4kg,5kg,20kg,50kg,100kg,200kg
D3 resistance wood flooring glue
D3 wood flooring glue
1.High strength D3 water resistant flooring glue
2.For in and outdoor use
3.Meet with EN71,SGS,RHS test
D3 wood flooring glue
1.
Product Information
Item Name:
VicBond TY-3001 D3 flooring glue
Type:
Self Crosslinking PVA
Solid content:
40-45%
Viscosity
9000-21000cps
Materials:
Polyvinyl acetate emulsion
Colour:
Milky white
Odor
None-odor
Toxicity
Non-toxic
Feature:
One component
Water resistance
D3 standard
Certification:
EN71,SGS,ROHS,EN204
MOQ:
5000KG
Delivery port:
FOB SHANTOU
Delivery time:
15-20days
Package:
500ml.1kg,4kg,20kg,50kg,200kg,1000kg
2.Advantages:
1)Water based
Eco-friendly ,No solvent evaporant .
2)Single component glue
No mixing hassles.
3)Fast setting
A time saving product,time saved is money saved
4)Water resistant joints
No worries for outdoor furniture
5)Labour saving
wooden surfaces can be bonded .
6)Meeting D3 standard.
3.Application:
TY 3000 white wood glue Suitable for
wood flooring
assembly ,furniture assembly,finger-joingting,radio frequency assembly,post forming,veneer and paper heat press,especially for picture frame assembly at the angle of 45 degrees and wood assembly at the angle of 90 degrees.
4.Storage
Store Away from direct heat & Sunlight.
5.Shelf Life
1 Year in right temperature and environment .
6.Packing
Available in the packs of 250g,500g, 1kg, 5kg, 15kg, 20kg, 25kg, 50kg.
Wood flooring Glue package picture
Finger jointing picture
Funiture assembly picture
1.High strength D3 water resistant flooring glue
2.For in and outdoor use
3.Meet with EN71,SGS,RHS test
D3 wood flooring glue
1.
Product Information
Item Name:
VicBond TY-3001 D3 flooring glue
Type:
Self Crosslinking PVA
Solid content:
40-45%
Viscosity
9000-21000cps
Materials:
Polyvinyl acetate emulsion
Colour:
Milky white
Odor
None-odor
Toxicity
Non-toxic
Feature:
One component
Water resistance
D3 standard
Certification:
EN71,SGS,ROHS,EN204
MOQ:
5000KG
Delivery port:
FOB SHANTOU
Delivery time:
15-20days
Package:
500ml.1kg,4kg,20kg,50kg,200kg,1000kg
2.Advantages:
1)Water based
Eco-friendly ,No solvent evaporant .
2)Single component glue
No mixing hassles.
3)Fast setting
A time saving product,time saved is money saved
4)Water resistant joints
No worries for outdoor furniture
5)Labour saving
wooden surfaces can be bonded .
6)Meeting D3 standard.
3.Application:
TY 3000 white wood glue Suitable for
wood flooring
assembly ,furniture assembly,finger-joingting,radio frequency assembly,post forming,veneer and paper heat press,especially for picture frame assembly at the angle of 45 degrees and wood assembly at the angle of 90 degrees.
4.Storage
Store Away from direct heat & Sunlight.
5.Shelf Life
1 Year in right temperature and environment .
6.Packing
Available in the packs of 250g,500g, 1kg, 5kg, 15kg, 20kg, 25kg, 50kg.
Wood flooring Glue package picture
Finger jointing picture
Funiture assembly picture
D4 wood glue
D4 Wood Glue
Two components EVA based wood glue,good boiling water resistance,wet strength,for hardwood edge-glue
D4 Wood Glue
1.
Product Information
Item Name:
VicBond TY-270 D4 wood glue
Type:
Two component Self Crosslinking PVA
Solid content:
49-51%
Viscosity
7000-13000cps
Materials:
Polyvinyl acetate emulsion
Colour:
Milky white
Odor
None-odor
Toxicity
Non-toxic
Feature:
One component
Water resistance
D4 standard
Certification:
EN71,SGS,ROHS,EN204
MOQ:
5000KG
Delivery port:
FOB SHANTOU
Delivery time:
15-20days
Package:
500ml.1kg,4kg,20kg,50kg,200kg,1000kg
2.Advantages:
1)EVA based
Eco-friendly ,No solvent evaporant .
2)Two component glue
No mixing hassles.
3)Fast setting
A time saving product,time saved is money saved
4)Water resistant joints
Can stand boiling water.
5)Labour saving
wooden surfaces can be bonded .
6)Meeting D4 standard.
Two components EVA based wood glue,good boiling water resistance,wet strength,for hardwood edge-glue
D4 Wood Glue
1.
Product Information
Item Name:
VicBond TY-270 D4 wood glue
Type:
Two component Self Crosslinking PVA
Solid content:
49-51%
Viscosity
7000-13000cps
Materials:
Polyvinyl acetate emulsion
Colour:
Milky white
Odor
None-odor
Toxicity
Non-toxic
Feature:
One component
Water resistance
D4 standard
Certification:
EN71,SGS,ROHS,EN204
MOQ:
5000KG
Delivery port:
FOB SHANTOU
Delivery time:
15-20days
Package:
500ml.1kg,4kg,20kg,50kg,200kg,1000kg
2.Advantages:
1)EVA based
Eco-friendly ,No solvent evaporant .
2)Two component glue
No mixing hassles.
3)Fast setting
A time saving product,time saved is money saved
4)Water resistant joints
Can stand boiling water.
5)Labour saving
wooden surfaces can be bonded .
6)Meeting D4 standard.
DHE-10 Epoxy for terminal sign
This epoxy glue water is the battery terminal special-purpose seal and the symbol rubber
Product Introduction:
This epoxy glue water is the battery terminal special-purpose seal and the symbol rubber. Its good electronic performance certified by many battery manufactures of many years using this products .
Main Features:
Appearance Smooth, free bubbles,bright color.
Stable performance, appearance and cohesion are immune to long time strong acid corrosion.
Good fluidity, Low viscosity, Curing fast in normal temperature, easy to operate,and suitable for sealing the storage batteries.
Quality indicator
Index
Group A
Group B
Appearance
red blue or black stringy liquid
yellow transparent liquid
(25°CmPa.s) Viscosity
2000-3500
40-250
25°C g/cm
3
Density
1.05-1.20
0.93-1.08
Blending ratio (amounts by weight)
2
1
Mixture firm time
(25°C) gel
23-27min
(60°C) solidification
90min
(25°C)Serviceable time
blend weight 60g 12-16min
Cohesiomal strength or our
(25°C/24h) normal temperature
2.5
+
1MPa
company's ABS test piece
60°C/90min) heat temperature
3.5
+
1MPa
hardness(Hp)
firm early
≥70
pickling early
±5
Weight change after pickling
≤2%
Product Introduction:
This epoxy glue water is the battery terminal special-purpose seal and the symbol rubber. Its good electronic performance certified by many battery manufactures of many years using this products .
Main Features:
Appearance Smooth, free bubbles,bright color.
Stable performance, appearance and cohesion are immune to long time strong acid corrosion.
Good fluidity, Low viscosity, Curing fast in normal temperature, easy to operate,and suitable for sealing the storage batteries.
Quality indicator
Index
Group A
Group B
Appearance
red blue or black stringy liquid
yellow transparent liquid
(25°CmPa.s) Viscosity
2000-3500
40-250
25°C g/cm
3
Density
1.05-1.20
0.93-1.08
Blending ratio (amounts by weight)
2
1
Mixture firm time
(25°C) gel
23-27min
(60°C) solidification
90min
(25°C)Serviceable time
blend weight 60g 12-16min
Cohesiomal strength or our
(25°C/24h) normal temperature
2.5
+
1MPa
company's ABS test piece
60°C/90min) heat temperature
3.5
+
1MPa
hardness(Hp)
firm early
≥70
pickling early
±5
Weight change after pickling
≤2%
DIHYDROGEN ALUMINIUM PHOSPHATE
best quality and best price
Name of index
Index
Result
Appearance
Powder
Up to grade
P2O5%
63-67
64
Al2O3%
15-17
15.8
Fe%
0.02max
<0.02
Appearance
White powder
Up to grade
Conclusion
Up to grade
Remark
DIHYDROGEN ALUMINIUM PHOSPHATE
Molecular Formula: AL(H
2
PO
4
)
3
Molecular Weight:M=317.94
As high-temperature adhesive agent, fire-proof material, flame-retardant print, fire proof cement and material for repairing surface of iron furnace ,it is widely used in electronics, electric industry, metallurgy, aviation , building material and also in high-temperature furnace and high-temperature equipment.
Name of index
Index
Result
Appearance
Powder
Up to grade
P2O5%
63-67
64
Al2O3%
15-17
15.8
Fe%
0.02max
<0.02
Appearance
White powder
Up to grade
Conclusion
Up to grade
Remark
DIHYDROGEN ALUMINIUM PHOSPHATE
Molecular Formula: AL(H
2
PO
4
)
3
Molecular Weight:M=317.94
As high-temperature adhesive agent, fire-proof material, flame-retardant print, fire proof cement and material for repairing surface of iron furnace ,it is widely used in electronics, electric industry, metallurgy, aviation , building material and also in high-temperature furnace and high-temperature equipment.
DJW Super &Strong Spray Adhesive
DJW spray adhesive is used in all kinds of sewing ,embroidery,knitting,clipping and adhesive positioning.
1.DJW -888 spray adhesive is applicable to cloth, paper,metal and silver parcel,plastic,comsumable product,cork,the film of the glue,the grass fibre ,it can stitch these materials to metal,timber,grass and others.2,Green environmental protection,no APEO or CFC3.DJW spray adhesive is jused in all kinds of sewing ,embroidery,knitting,clipping and adhesive positioning
1.DJW -888 spray adhesive is applicable to cloth, paper,metal and silver parcel,plastic,comsumable product,cork,the film of the glue,the grass fibre ,it can stitch these materials to metal,timber,grass and others.2,Green environmental protection,no APEO or CFC3.DJW spray adhesive is jused in all kinds of sewing ,embroidery,knitting,clipping and adhesive positioning
17 Not contain styrene and non-toxic granite adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
DL-2-Aminobutyric Acid
DL-2-Aminobutyric Acid:
1 more than 99.0%
2 excellent quality
3 competitive price
4 great service experience
DL-2-Aminobutyric Acid:
1 more than 99.0%
2 excellent quality
3 competitive price
4 great service experience
5 good shipment service
1 more than 99.0%
2 excellent quality
3 competitive price
4 great service experience
DL-2-Aminobutyric Acid:
1 more than 99.0%
2 excellent quality
3 competitive price
4 great service experience
5 good shipment service
DMS-A16 Acid Silicone Sealant
DMS-A16 Acid Silicone Sealant
one-component, widely used in sealing and adhesion of glass windows and doors.
DMS-A16 Acid Silicone Sealant
Product Characters:
1.DMS-A16 series are in single component,acid,room curing.
2.Fast curing speed and superior bond strength.
3.Color black,white,grey and clear are available,other colors can be made as requested.
Main Uses:
1.All kinds of doors and windows installation.
2.Bonding and sealing various kinds of glass memebers.
Restriction:
1.Not suitable for the materials surface with grease seep,plasticizing agent or solvent.
2.Not suitable to use in non-ventilated place,it needs moisture in air to solidify.
3.Not suitable for the continuous soggy places or wet places all the year round.
4.Not suitable to use when the temperature of the materials surface is lower than 4 centigrade or higher than 40 centigrade.
Packaging:
Plastic Bottle,300ml(net capacity),24 pieces per carton.
Storage:
It should be stored in a dry,cool and well ventilated place,where the temperature is below 27 centigrade.As from the date of production,the storage period is 12 months.
one-component, widely used in sealing and adhesion of glass windows and doors.
DMS-A16 Acid Silicone Sealant
Product Characters:
1.DMS-A16 series are in single component,acid,room curing.
2.Fast curing speed and superior bond strength.
3.Color black,white,grey and clear are available,other colors can be made as requested.
Main Uses:
1.All kinds of doors and windows installation.
2.Bonding and sealing various kinds of glass memebers.
Restriction:
1.Not suitable for the materials surface with grease seep,plasticizing agent or solvent.
2.Not suitable to use in non-ventilated place,it needs moisture in air to solidify.
3.Not suitable for the continuous soggy places or wet places all the year round.
4.Not suitable to use when the temperature of the materials surface is lower than 4 centigrade or higher than 40 centigrade.
Packaging:
Plastic Bottle,300ml(net capacity),24 pieces per carton.
Storage:
It should be stored in a dry,cool and well ventilated place,where the temperature is below 27 centigrade.As from the date of production,the storage period is 12 months.
DS CORNING fast drying acetic silicone sealant
Silicone Sealant:One component, RTV-1, acetic acid Curing at room temperature, low modulus silicone sealant;
SILICONE SEALANT:
DS CORNING fast drying acetic silicone sealant
Characteristics:
One component, RTV-1, acetic acid Curing at room temperature, low modulus silicone sealant;
Excellent weatherproofing and anti-aging performance;
Excellent adhesion to various building materials;
Main Purpose:
Seal and joint for various aluminum-alloy windows and doors;
Adornment engineering for glass indoor and outdoor;
Other waterproof engineering.
Color:
Transparent, silver grey, black, white and others of special order
Application Standard:
GB/T 14683-2003
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
450
GB/T 13477
Skin Time min
≤180
10
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
>0.4
0.25
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
12 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml
SILICONE SEALANT:
DS CORNING fast drying acetic silicone sealant
Characteristics:
One component, RTV-1, acetic acid Curing at room temperature, low modulus silicone sealant;
Excellent weatherproofing and anti-aging performance;
Excellent adhesion to various building materials;
Main Purpose:
Seal and joint for various aluminum-alloy windows and doors;
Adornment engineering for glass indoor and outdoor;
Other waterproof engineering.
Color:
Transparent, silver grey, black, white and others of special order
Application Standard:
GB/T 14683-2003
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
450
GB/T 13477
Skin Time min
≤180
10
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
>0.4
0.25
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
12 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml
DS CORNING neutral silicone weatherproof sealant
silicone sealant:One component, RTV-1, neutral curing, weatherproof sealant;
SILICONE SEALANT:
DS CORNING neutral silicone weatherproof sealant
Characteristics:
One component, RTV-1, neutral curing, weatherproof sealant;
Excellent weatherproof performance, strong capability of anti-ultraviolet
No need to prime coat, good cohesiveness to most building materials;
Good compatibility with other neutral silicone sealant.
Main Purpose
Weatherproof seal for curtain wall such as glass, metal, concrete and stone, etc.;
Seal and joint with various glass windows and doors;
Joint seal for roof light building.
Color:
Black, porcelain white, grey and others of special order
Application:
GB/T 14683-2003; JC/T 882-2001
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion
≥80
128
GB/T 13477
Skin Time(h)
≤180
45
GB/T 16776
Hardness(HsA)
20-50
46
GB/T 531
Peel Strength N/mm
≥1.0
4.1
GB/T 13477
Tensile Modulus Mpa
>0.4
0.78
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Movement Capability (%)
±25
±25
ASTMC 719
Aging Test
Passed
Passed
ASTMC 719
Storage
9 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml, 20pcs/ctn for 590ml
SILICONE SEALANT:
DS CORNING neutral silicone weatherproof sealant
Characteristics:
One component, RTV-1, neutral curing, weatherproof sealant;
Excellent weatherproof performance, strong capability of anti-ultraviolet
No need to prime coat, good cohesiveness to most building materials;
Good compatibility with other neutral silicone sealant.
Main Purpose
Weatherproof seal for curtain wall such as glass, metal, concrete and stone, etc.;
Seal and joint with various glass windows and doors;
Joint seal for roof light building.
Color:
Black, porcelain white, grey and others of special order
Application:
GB/T 14683-2003; JC/T 882-2001
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion
≥80
128
GB/T 13477
Skin Time(h)
≤180
45
GB/T 16776
Hardness(HsA)
20-50
46
GB/T 531
Peel Strength N/mm
≥1.0
4.1
GB/T 13477
Tensile Modulus Mpa
>0.4
0.78
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Movement Capability (%)
±25
±25
ASTMC 719
Aging Test
Passed
Passed
ASTMC 719
Storage
9 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml, 20pcs/ctn for 590ml
DS CORNING silicone stone sealant
silicone sealant:One component, RTV-1, neutral curing at temperature silicone sealant for construction;
RTV SILICONE SEALANT: DS CORNING STONE SEALANT
Characteristics:
One component, RTV-1, neutral curing at temperature silicone sealant for construction;
No iner micromolecule like plasticizer in formula, no pollution to porosint like marble, granite; Better sealing and adornment effects than other common silicone sealants, compensating the disadvantage of pollution creating;
Excellent adhesion to various marble and granite; the shape will not change with the invasion of natural condition;
Excellent weatherproof performance, strong capability of anti-ultraviolet;
Good compatibility with other neutral silicone sealant.
Main Purpose:
Joint seal for stone curtain wall and cement precast slab;
Adhesion and joint seal for ceramic engineering;
Joint seal between stone and other materials like glass, metal and plastic etc.
Other purpose
Color:
Black and others of special order
Application Standard:
JC/T 883-2001
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion
≥80
90
GB/T 13477
Skin Time(h)
≤180
30
GB/T 16776
Hardness(HsA)
20-60
53
GB/T 531
Thermogravimetry (%)
≤10
2.0
GB 16776
Tensile Modulus Mpa
>0.4
0.8
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Movement Capability (%)
±12.5
±12.5
ISO 9047
Pollution(mm)
<1
0
GB/T 1741
Aging Test
Passed
Passed
ASTMC 793
Storage
9 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml, 20pcs/ctn for 590ml
RTV SILICONE SEALANT: DS CORNING STONE SEALANT
Characteristics:
One component, RTV-1, neutral curing at temperature silicone sealant for construction;
No iner micromolecule like plasticizer in formula, no pollution to porosint like marble, granite; Better sealing and adornment effects than other common silicone sealants, compensating the disadvantage of pollution creating;
Excellent adhesion to various marble and granite; the shape will not change with the invasion of natural condition;
Excellent weatherproof performance, strong capability of anti-ultraviolet;
Good compatibility with other neutral silicone sealant.
Main Purpose:
Joint seal for stone curtain wall and cement precast slab;
Adhesion and joint seal for ceramic engineering;
Joint seal between stone and other materials like glass, metal and plastic etc.
Other purpose
Color:
Black and others of special order
Application Standard:
JC/T 883-2001
Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slump
Horizontal
Undeformed
undeformed
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion
≥80
90
GB/T 13477
Skin Time(h)
≤180
30
GB/T 16776
Hardness(HsA)
20-60
53
GB/T 531
Thermogravimetry (%)
≤10
2.0
GB 16776
Tensile Modulus Mpa
>0.4
0.8
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Movement Capability (%)
±12.5
±12.5
ISO 9047
Pollution(mm)
<1
0
GB/T 1741
Aging Test
Passed
Passed
ASTMC 793
Storage
9 months shelf life if stored below 27 degrees centigrade in cool, dry places after the date of production
24pcs/ctn for 300ml, 20pcs/ctn for 590ml
DS Corning Acetic Silicone Sealant
silicone sealant: One component, RTV-1, acetic Curing at room temperature silicone sealant
silicone sealant:
1. Characteristics:
One component, RTV-1, acetic Curing at room temperature silicone sealant;
Excellent weatherproofing and anti-aging performance;
Easy to use; Excellent adhesion to various building materials;
2. Main Purpose:
Seal and joint for various glass windows and doors;
Other sealing decoration.
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
350
GB/T 13477
Skin Time min
≤180
20
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
≤0.4
0.23
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
9 months shelf life if stored below 27 degree in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
300ml/cartridge; 24cartridge/ctn
Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with materials with grease or exudation;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
Unsuitable for the frosty or moist surface;
Unsuitable for metal and coated glass;
Cannot be used on the substrate surface under 6 degree or above 40 degree
Cannot be used on the unclear or unstable surface;
Unsuitable for the alkaline materials like marble,granite,etc.
7. Technology Service
We supply integrate data, technical consultation and free compatibility test.
Solving problem in the course of using timely
8. Safety
Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and anything harm to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
9. Warranty
As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
silicone sealant:
1. Characteristics:
One component, RTV-1, acetic Curing at room temperature silicone sealant;
Excellent weatherproofing and anti-aging performance;
Easy to use; Excellent adhesion to various building materials;
2. Main Purpose:
Seal and joint for various glass windows and doors;
Other sealing decoration.
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
350
GB/T 13477
Skin Time min
≤180
20
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
≤0.4
0.23
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
9 months shelf life if stored below 27 degree in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
300ml/cartridge; 24cartridge/ctn
Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with materials with grease or exudation;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
Unsuitable for the frosty or moist surface;
Unsuitable for metal and coated glass;
Cannot be used on the substrate surface under 6 degree or above 40 degree
Cannot be used on the unclear or unstable surface;
Unsuitable for the alkaline materials like marble,granite,etc.
7. Technology Service
We supply integrate data, technical consultation and free compatibility test.
Solving problem in the course of using timely
8. Safety
Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and anything harm to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
9. Warranty
As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
DS Corning High Grade Acetic Silicone Sealant
silicon sealant: rtv acetic sealant
1. Characteristics:
l One component, RTV-1, acetic Curing at room temperature silicone sealant;
l Excellent weatherproofing and anti-aging performance;
l Excellent adhesion to various building materials;
Main Purpose:
l Seal and joint for various glass windows and doors;
l Other sealing decoration.
2. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
400
GB/T 13477
Skin Time min
≤180
20
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
≤0.4
0.22
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
9 months shelf life if stored below 27 in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
l 300ml/cartridge; 24cartridge/ctn
l Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
l Cannot be used as structural sealant;
l Not compatible with materials with grease or exudation;
l Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
l Unsuitable for the frosty or moist surface;
l Unsuitable for metal and coated glass;
l Cannot be used on the substrate surface under 6 or above 40
l Cannot be used on the unclear or unstable surface;
l Unsuitable for the alkaline materials like marble,granite,etc.
7. Technology Service
l We supply integrate data, technical consultation and free compatibility test.
l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
l Please see Operation Instruction to Girafe Silicone Structural Sealant
9. Safety
l Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
l Silicone sealant will not release any harmful substance and anything harm to health after cured;
l Keep uncured silicone sealant beyond childrens reach. If getting into eyes, wash off with running water and consult a doctor;
10. Warranty
l As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
11. Maintenance
l Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
l Girafe silicone sealants have good adhesion to cured sealant.
12. Purchase Channel and Price
l Users can buy it from Guangdong Girafe Fine Chemical Co.,Ltd and appointed regional agents to ensure the quality and realness
13.Estimated Amount of Use: Please see following form of estimated amount of various joints:
The length of DS Corning High Grade Acetic Sealant 300ml can be extruded during application.
1. Characteristics:
l One component, RTV-1, acetic Curing at room temperature silicone sealant;
l Excellent weatherproofing and anti-aging performance;
l Excellent adhesion to various building materials;
Main Purpose:
l Seal and joint for various glass windows and doors;
l Other sealing decoration.
2. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
400
GB/T 13477
Skin Time min
≤180
20
GB/T 13477
Hardness(HsA)
20-60
22
GB/T 531
Tensile Modulus Mpa
≤0.4
0.22
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Storage
9 months shelf life if stored below 27 in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
l 300ml/cartridge; 24cartridge/ctn
l Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
l Cannot be used as structural sealant;
l Not compatible with materials with grease or exudation;
l Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
l Unsuitable for the frosty or moist surface;
l Unsuitable for metal and coated glass;
l Cannot be used on the substrate surface under 6 or above 40
l Cannot be used on the unclear or unstable surface;
l Unsuitable for the alkaline materials like marble,granite,etc.
7. Technology Service
l We supply integrate data, technical consultation and free compatibility test.
l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
l Please see Operation Instruction to Girafe Silicone Structural Sealant
9. Safety
l Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
l Silicone sealant will not release any harmful substance and anything harm to health after cured;
l Keep uncured silicone sealant beyond childrens reach. If getting into eyes, wash off with running water and consult a doctor;
10. Warranty
l As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
11. Maintenance
l Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
l Girafe silicone sealants have good adhesion to cured sealant.
12. Purchase Channel and Price
l Users can buy it from Guangdong Girafe Fine Chemical Co.,Ltd and appointed regional agents to ensure the quality and realness
13.Estimated Amount of Use: Please see following form of estimated amount of various joints:
The length of DS Corning High Grade Acetic Sealant 300ml can be extruded during application.
DS Corning Strong Type Acetic Silicone Sealant
silicone sealant: One component, RTV-1, acetic acid Curing at room temperature, high modulus silicone sealant;
silicone sealant:
1. Characteristics:
One component, RTV-1, acetic acid Curing at room temperature, high modulus silicone sealant;
Excellent weatherproofing and anti-aging performance; Excellent temperature resistance performance
Excellent adhesion to various building materials;
2. Main Purpose:
Structurally glazing in big flat glass and glass roof structural engineering;
Seal and joint for various glass installation engineering;
Assembly for aquarium;
Seal and joint for various aluminum-alloy windows and doors;
Other waterproof engineering.
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
400
GB/T 13477
Skin Time min
≤180
12
GB/T 13477
Hardness(HsA)
20-60
27
GB/T 531
Thermogravimetry(%)
≤10
7.5
ASTMC 792
Tensile Modulus Mpa
>0.4
0.51
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Tensile Recovery Rate
≥80
94
GB/T 13477
Storage
12 months shelf life if stored below 27 degree in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
300ml/cartridge; 24cartridge/ctn
Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
Not compatible with materials with grease or exudation;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
Unsuitable for the frosty or moist surface;
Unsuitable for metal and coated glass;
Unsuitable for the alkaline materials like marble,granite,etc
Cannot be used on the substrate surface under 6 degree or above degree
7. Technology Service
We supply integrate data, technical consultation and free compatibility test. l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
Please see “Operation Instruction to Girafe Silicone Structural Sealant ”
9. Safety
Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and anything harm to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
10. Warranty
As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.
11. Maintenance
Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
Girafe silicone sealants have good adhesion to cured sealant.
12. Purchase Channel and Price
Users can buy it from Guangdong Girafe Fine Chemical Co.,Ltd and appointed regional agents to ensure the quality and realness
13.Estimated Amount of Use: Please see following form of estimated amount of various joints: The length of DS Corning Strong Type Acetic Sealant 300ml can be extruded during application.
Specification
Width (6 mm)
Width (9 mm)
Width (12mm)
Width (15mm)
Width (18mm)
Width (21mm)
Width (24mm)
Thickness (6mm)
Length (8.3m)
Length (5.5m)
Length (4.2m)
Length (3.3m)
Length (2.8m)
Length (2.4m)
Length (2.1m)
Thickness (9mm)
Length (3.7m)
Length (2.8m)
Length (2.2m)
Length (1.8m)
Length (1.6m)
Length (1.4m)
Thickness (12mm)
Length (2.1m)
Length (1.7m)
Length (1.4m)
Length (1.2m)
Length (1.0m)
silicone sealant:
1. Characteristics:
One component, RTV-1, acetic acid Curing at room temperature, high modulus silicone sealant;
Excellent weatherproofing and anti-aging performance; Excellent temperature resistance performance
Excellent adhesion to various building materials;
2. Main Purpose:
Structurally glazing in big flat glass and glass roof structural engineering;
Seal and joint for various glass installation engineering;
Assembly for aquarium;
Seal and joint for various aluminum-alloy windows and doors;
Other waterproof engineering.
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion ml/min
≥80
400
GB/T 13477
Skin Time min
≤180
12
GB/T 13477
Hardness(HsA)
20-60
27
GB/T 531
Thermogravimetry(%)
≤10
7.5
ASTMC 792
Tensile Modulus Mpa
>0.4
0.51
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Tensile Recovery Rate
≥80
94
GB/T 13477
Storage
12 months shelf life if stored below 27 degree in cool, dry places after the date of production
4. Application Standard:
GB/T 14683-2003
5. Specification
300ml/cartridge; 24cartridge/ctn
Transparent,aluminum, black, white or others of special order
6. Restriction of Usage:
Not compatible with materials with grease or exudation;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
Unsuitable for the frosty or moist surface;
Unsuitable for metal and coated glass;
Unsuitable for the alkaline materials like marble,granite,etc
Cannot be used on the substrate surface under 6 degree or above degree
7. Technology Service
We supply integrate data, technical consultation and free compatibility test. l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
Please see “Operation Instruction to Girafe Silicone Structural Sealant ”
9. Safety
Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and anything harm to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
10. Warranty
As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.
11. Maintenance
Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
Girafe silicone sealants have good adhesion to cured sealant.
12. Purchase Channel and Price
Users can buy it from Guangdong Girafe Fine Chemical Co.,Ltd and appointed regional agents to ensure the quality and realness
13.Estimated Amount of Use: Please see following form of estimated amount of various joints: The length of DS Corning Strong Type Acetic Sealant 300ml can be extruded during application.
Specification
Width (6 mm)
Width (9 mm)
Width (12mm)
Width (15mm)
Width (18mm)
Width (21mm)
Width (24mm)
Thickness (6mm)
Length (8.3m)
Length (5.5m)
Length (4.2m)
Length (3.3m)
Length (2.8m)
Length (2.4m)
Length (2.1m)
Thickness (9mm)
Length (3.7m)
Length (2.8m)
Length (2.2m)
Length (1.8m)
Length (1.6m)
Length (1.4m)
Thickness (12mm)
Length (2.1m)
Length (1.7m)
Length (1.4m)
Length (1.2m)
Length (1.0m)
DVD BONDING GLUE-350
DVD Bonding Glue are made of PU-acrylated resin,acrylic type monomers and mixed photo initiators.After curing via UV irradiation
DVD Bonding Glue are made of PU-acrylated resin,acrylic type monomers and mixed photo initiators.After curing via UV irradiation ,the lacquer can form on the substrates and a thin film bears properties of excellent adhesion.lt is easy to use with the features of fast curing speed,least foam and evenly coating.
Packing:
Standard: 20kgs/barrel
Optional:other sizes are also avaliable
STORAGE AND SHELF LIFE
(a) Store in cool place,away from direct sun light.
(b) Gurangee 1 year in normal storage conditions and original packing.
DVD Bonding Glue are made of PU-acrylated resin,acrylic type monomers and mixed photo initiators.After curing via UV irradiation ,the lacquer can form on the substrates and a thin film bears properties of excellent adhesion.lt is easy to use with the features of fast curing speed,least foam and evenly coating.
Packing:
Standard: 20kgs/barrel
Optional:other sizes are also avaliable
STORAGE AND SHELF LIFE
(a) Store in cool place,away from direct sun light.
(b) Gurangee 1 year in normal storage conditions and original packing.
DY101 Pure urea formaldehyde resin powder
1.Established in 1995
2.Pass ISO14001
3.Strickly Quality assurance system
4.Output: 10000MT/ year
5.plywood achived E1/E0
DY101 urea formaldehyde resin is a powdery product of pure urea formaldehyde resin without adding any filling material, modifier or curing agent. It has the advantages of convenient use and long-term storage, along with convenience for long distance transportation.
DY101 can be used in combination with other extenders, curing agents and water for wood board laminating or veneer overlaying. Its environmental protection performance can be as high as level E1. It also can be used for production of technological woods, super-thick artificial boards and bent woods, or be added into the liquid glue for higher solid content.
Product Properties
Appearance: White powder
Granularity: 80mesh (90% passed)
Pot life: ≥3.0 hours (25°C)
Bonding strength: ≥1.4Mpa
Storage period: ≥1 year (25°C)
Instructions
Allocation proportion: DY101 : Modifier : Water
100 : 30 : 60
Glue usage: depending on material of board surface and smoothness, normally 150-160g/m2 (single side)
Moisture in board: minimum 5%, optimal 7-9%, maximum 12%
Hot pressing temperature: 105°C
Hot pressing pressure: 8-16kg/cm2
Hot pressing time: 0.2-0.5min/mm board thickness
Attention
When the glue is at a low temperature, its curing time will be prolonged. In an extremely low temperature (below 10°C), it is better to stop using it temporarily or use it with strong acid curing agents.
2.Pass ISO14001
3.Strickly Quality assurance system
4.Output: 10000MT/ year
5.plywood achived E1/E0
DY101 urea formaldehyde resin is a powdery product of pure urea formaldehyde resin without adding any filling material, modifier or curing agent. It has the advantages of convenient use and long-term storage, along with convenience for long distance transportation.
DY101 can be used in combination with other extenders, curing agents and water for wood board laminating or veneer overlaying. Its environmental protection performance can be as high as level E1. It also can be used for production of technological woods, super-thick artificial boards and bent woods, or be added into the liquid glue for higher solid content.
Product Properties
Appearance: White powder
Granularity: 80mesh (90% passed)
Pot life: ≥3.0 hours (25°C)
Bonding strength: ≥1.4Mpa
Storage period: ≥1 year (25°C)
Instructions
Allocation proportion: DY101 : Modifier : Water
100 : 30 : 60
Glue usage: depending on material of board surface and smoothness, normally 150-160g/m2 (single side)
Moisture in board: minimum 5%, optimal 7-9%, maximum 12%
Hot pressing temperature: 105°C
Hot pressing pressure: 8-16kg/cm2
Hot pressing time: 0.2-0.5min/mm board thickness
Attention
When the glue is at a low temperature, its curing time will be prolonged. In an extremely low temperature (below 10°C), it is better to stop using it temporarily or use it with strong acid curing agents.
180 epoxy adhesives with the high strength
1.rapid -curing ,the strength of adhesiveis strong
2.high resistance to water,anti-aging
3.sealing and moistureproof is good
Project
conditons
main index
reference test standards
Stell-stell adhesive shear intensity(mpa)
25°c 72hour
>16MPA
GB50367-2006
Anchoring(mpa)
16 anchorbolts D150mm
>11MPA
GB50367-2006
Product characteristics and advantages
1. YC180E is new building struction adhesive include two component structure adhesive, after mediating ,it will fast-curing at room temperature
2. Has the structure bearing fast, sticky relay high tensile force, pulling the good performance
3. Available in - 10 degrees to+ 40 degrees under the condition of construction, construction is simple
4. Waterproof, resistance medium, anti-aging the performance of seal amd moistureproof is good
5. Bonding object can be widely, adhesive materials, marble, concrete and metal, etc
Achor diameter(mm)
6
8
10
12
14
16
18
20
22
25
28
Bore diameter(mm)
10
12
14
16
18
22
25
28
30
32
26
Drilling depth(mm)
90
120
150
180
210
240
270
300
330
375
420
Application range
All kinds of architectural structure of reinforced buried with anchor anchorage fill, engineering.
various equipment foundation reinforcement of anchorage, the anchor firm, mine roadway road top, wall part of anchorage support, railway, tracks of anchorage and tracks insulation anchorage, wall installation anchorage and chemical equipment, pipeline, billboards, etc, installation of water conservancy facilities, pier anchor, roads, Bridges, etc. Various kinds of anchorage projecT
Note
1. Store in a cool, dry and ventilated storeroom, storage period is 6 months, more than storage period, after testing performance qualified is up to standard, still can use
2. Take glue, not will be one of components interfuse another a components
3. Adjustable glue using tools in the group ,the tools should be cleaned after use or scrap
4. This adhesion non-toxic ,if it careless touch skin, first use acetone try to polishing, and then rinse with water again
5. This product belongs to non-toxic, no dangerous goods, can transportant as well as other general chemical building material
2.high resistance to water,anti-aging
3.sealing and moistureproof is good
Project
conditons
main index
reference test standards
Stell-stell adhesive shear intensity(mpa)
25°c 72hour
>16MPA
GB50367-2006
Anchoring(mpa)
16 anchorbolts D150mm
>11MPA
GB50367-2006
Product characteristics and advantages
1. YC180E is new building struction adhesive include two component structure adhesive, after mediating ,it will fast-curing at room temperature
2. Has the structure bearing fast, sticky relay high tensile force, pulling the good performance
3. Available in - 10 degrees to+ 40 degrees under the condition of construction, construction is simple
4. Waterproof, resistance medium, anti-aging the performance of seal amd moistureproof is good
5. Bonding object can be widely, adhesive materials, marble, concrete and metal, etc
Achor diameter(mm)
6
8
10
12
14
16
18
20
22
25
28
Bore diameter(mm)
10
12
14
16
18
22
25
28
30
32
26
Drilling depth(mm)
90
120
150
180
210
240
270
300
330
375
420
Application range
All kinds of architectural structure of reinforced buried with anchor anchorage fill, engineering.
various equipment foundation reinforcement of anchorage, the anchor firm, mine roadway road top, wall part of anchorage support, railway, tracks of anchorage and tracks insulation anchorage, wall installation anchorage and chemical equipment, pipeline, billboards, etc, installation of water conservancy facilities, pier anchor, roads, Bridges, etc. Various kinds of anchorage projecT
Note
1. Store in a cool, dry and ventilated storeroom, storage period is 6 months, more than storage period, after testing performance qualified is up to standard, still can use
2. Take glue, not will be one of components interfuse another a components
3. Adjustable glue using tools in the group ,the tools should be cleaned after use or scrap
4. This adhesion non-toxic ,if it careless touch skin, first use acetone try to polishing, and then rinse with water again
5. This product belongs to non-toxic, no dangerous goods, can transportant as well as other general chemical building material
DY102 Urea Formaldehyde Powder Resin (Pre-catalyzed)
1.Established in 1995
2.Pass ISO14001
3.Strickly Quality assurance system
4.Output: 10000MT/ year
5.plywood achived E1/E0
Product Introduction
DY102 urea formaldehyde resin is a formulated single-component powdery gluing agent, which features its high water resistance, mildew proofing, strong bonding and supporting cold pressing and hot pressing curing. It is convenient to use. Compared with the imported products of the same kind, it has little smell and a longer working life. It is the ideal glue for furniture assembly, veneer overlaying, wood board laminating, and wood edging.
Instructions
It can be prepared with cold water.
The volume ratio of power to water is 3:1.
The weight ratio 5:2-3.
Water can be increased or reduced depending on using conditions.
Measure and prepare glue powder, add 2/3 of total water and then mix them until all glue powder dissolves in the water.
Add the remaining water and mix for using. (Use before gelation, and below 25°C, the pot life is 2-3 hours usually)
Moisture control of plywood or wood
Cold pressing: minimum 6%, optimal 8-12%, maximum 15%
Hot pressing: minimum 5%, optimal 7-9%, maximum 12%
Storage period
In storage, curing happens when the wood glue powder contacts with moisture and the glue becomes useless. Therefore, the glue powder should be sealed and stored in a cold and dry environment, and shall have a longer storage period in sealed conditions.
Below 21°C, the storage period is more than 1 year.
2.Pass ISO14001
3.Strickly Quality assurance system
4.Output: 10000MT/ year
5.plywood achived E1/E0
Product Introduction
DY102 urea formaldehyde resin is a formulated single-component powdery gluing agent, which features its high water resistance, mildew proofing, strong bonding and supporting cold pressing and hot pressing curing. It is convenient to use. Compared with the imported products of the same kind, it has little smell and a longer working life. It is the ideal glue for furniture assembly, veneer overlaying, wood board laminating, and wood edging.
Instructions
It can be prepared with cold water.
The volume ratio of power to water is 3:1.
The weight ratio 5:2-3.
Water can be increased or reduced depending on using conditions.
Measure and prepare glue powder, add 2/3 of total water and then mix them until all glue powder dissolves in the water.
Add the remaining water and mix for using. (Use before gelation, and below 25°C, the pot life is 2-3 hours usually)
Moisture control of plywood or wood
Cold pressing: minimum 6%, optimal 8-12%, maximum 15%
Hot pressing: minimum 5%, optimal 7-9%, maximum 12%
Storage period
In storage, curing happens when the wood glue powder contacts with moisture and the glue becomes useless. Therefore, the glue powder should be sealed and stored in a cold and dry environment, and shall have a longer storage period in sealed conditions.
Below 21°C, the storage period is more than 1 year.
Debonder (Anti-bonding Substance)
Debonder (Anti-bonding Substance)
It can clear Cyanoacrylate,
wipe well off oil stain
dirt and the scrap of various adhesives
DEBONDER (Anti-bonding Substance)
6 Pieces Super Glue+1 Piece DEBONDER
DEBONDER is a kind of transparent glue, which can decompose a variety of organic substance, wipe well off oil stain, dirt and the scrap of various adhesives, etc. So it is widely used in every walk of life and everyday family life.
It is an unexpected convenience for you often to keep a tube of clear glue.
Usage
1. Screw off the cap, pierce tube nozzle with cap point.
2. Squeeze out an appropriate amount of DEBONDER and apply it on the dirty place ,then wait for 10 seconds.
3.Rub with fingers back and forth till the dirt comes out, then wash it under water.
4.Repeat the above procedures if necessary.
Notice
Do not get closed to fire when using.
Inappropriate to apply to food containers, fabrics and so on.
Keep out of reach of children . If any swallow or contact with eye happens, go to the hospital.
It can clear Cyanoacrylate,
wipe well off oil stain
dirt and the scrap of various adhesives
DEBONDER (Anti-bonding Substance)
6 Pieces Super Glue+1 Piece DEBONDER
DEBONDER is a kind of transparent glue, which can decompose a variety of organic substance, wipe well off oil stain, dirt and the scrap of various adhesives, etc. So it is widely used in every walk of life and everyday family life.
It is an unexpected convenience for you often to keep a tube of clear glue.
Usage
1. Screw off the cap, pierce tube nozzle with cap point.
2. Squeeze out an appropriate amount of DEBONDER and apply it on the dirty place ,then wait for 10 seconds.
3.Rub with fingers back and forth till the dirt comes out, then wash it under water.
4.Repeat the above procedures if necessary.
Notice
Do not get closed to fire when using.
Inappropriate to apply to food containers, fabrics and so on.
Keep out of reach of children . If any swallow or contact with eye happens, go to the hospital.
Decoration Film of TPU (ISO, SGS, OEKO-TEX Certification)
Decoration Film of TPU (ISO, SGS, OEKO-TEX Certification)
1. Orange Color
2. TPU Material
3. Seamless Pocket Special Usage
Decoration Film of TPU (ISO, SGS, OEKO-TEX Certification)
1. Orange Color
2. TPU Material
3. Seamless Pocket Special Usage
4. 0ne layer
1. Orange Color
2. TPU Material
3. Seamless Pocket Special Usage
Decoration Film of TPU (ISO, SGS, OEKO-TEX Certification)
1. Orange Color
2. TPU Material
3. Seamless Pocket Special Usage
4. 0ne layer
Decorators Acrylic Caulk
KATER Caulk is a one part emulsion material which sets upon exposure to the atmosphere and forms a durable flexible seal.
KATER Decorators Caulk may be used internally or externally and contains a fungicide to discourage mould growth.
Specifically formulated for easy application it is ideal for
sealing gaps around window and door frames. Sealing gaps in skirting boards and covings. Sealing gaps in plasterboard. General Sealing of internal fixtures. KATER Decorators Caulk can be easily painted or papered over making it an ideal all purpose sealant when decorating.
KATER Decorators Caulk may be used internally or externally and contains a fungicide to discourage mould growth.
Specifically formulated for easy application it is ideal for
sealing gaps around window and door frames. Sealing gaps in skirting boards and covings. Sealing gaps in plasterboard. General Sealing of internal fixtures. KATER Decorators Caulk can be easily painted or papered over making it an ideal all purpose sealant when decorating.
Degussa(OCTEO)
KH-350 is high purity, undiluted N-octyltriethoxy-silane.
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane;Triethoxyoctylsilane
CAS No.: 2943-75-1
Silane coupling agent KH-350
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane; Triethoxyoctylsilane
CAS No.: 2943-75-1
Structure formula:
FEATURES
Can be used in the formulation of water repellent products
Produces a hydrophobic treatment that inhibits water absorption
Can improve dispersion of polar fillers in covalent matrices
BENEFITS
Small molecular structure for deep penetration of concrete surfaces
Surface modification can improve compatibility to nonpolar substrates
APPLICATIONS
Commercial buildings
Parking decks/garages
Highways
Bridge structures
Filler modification
TYPICAL PROPERTIES
Color Clear
Purity 98%
Specific Gravity at 25°C (77°F) 0.875
Flash Point, closed cup 63 (>145)
Density °C (°F)73
Volatile Organic Compound (VOC) Content lb/gal 329
Solvent (Thinner)Isopropanol, ethanol or various
DESCRIPTION
KH-350 is high purity, undiluted N-octyltriethoxy-silane. When diluted with an appro-priate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.
KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.
KH-350 is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.
HOW TO USE
Dilution
It can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane Typical dilution levels are 40 percent and 20 percent KH-350 in a solvent.
Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface. Refer to the manufacturers data sheet for proper handling and disposal of solvents.
NOTE: When using any solvent, always provide adequate ventilation. Follow handling precautions on the solvent container label.
Application
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets.
A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils and other contaminants. Formulated KH-350 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.
Any plants or shrubs should be protected from exposure to the treatment. Any material that should not be exposed to solvents should also be protected.
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane;Triethoxyoctylsilane
CAS No.: 2943-75-1
Silane coupling agent KH-350
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane; Triethoxyoctylsilane
CAS No.: 2943-75-1
Structure formula:
FEATURES
Can be used in the formulation of water repellent products
Produces a hydrophobic treatment that inhibits water absorption
Can improve dispersion of polar fillers in covalent matrices
BENEFITS
Small molecular structure for deep penetration of concrete surfaces
Surface modification can improve compatibility to nonpolar substrates
APPLICATIONS
Commercial buildings
Parking decks/garages
Highways
Bridge structures
Filler modification
TYPICAL PROPERTIES
Color Clear
Purity 98%
Specific Gravity at 25°C (77°F) 0.875
Flash Point, closed cup 63 (>145)
Density °C (°F)73
Volatile Organic Compound (VOC) Content lb/gal 329
Solvent (Thinner)Isopropanol, ethanol or various
DESCRIPTION
KH-350 is high purity, undiluted N-octyltriethoxy-silane. When diluted with an appro-priate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.
KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.
KH-350 is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.
HOW TO USE
Dilution
It can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane Typical dilution levels are 40 percent and 20 percent KH-350 in a solvent.
Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface. Refer to the manufacturers data sheet for proper handling and disposal of solvents.
NOTE: When using any solvent, always provide adequate ventilation. Follow handling precautions on the solvent container label.
Application
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets.
A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils and other contaminants. Formulated KH-350 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.
Any plants or shrubs should be protected from exposure to the treatment. Any material that should not be exposed to solvents should also be protected.
Friday, September 23, 2011
Degussa(VTMOEO)
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated
Silane couping agent
Vinyltris(2-methoxyethoxy)silane
CAS No.:1067-53-4
Silane couping agent
Introduction:
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture.
Typical Physical Properties:
CAS No.: 1067-53-4
Molecular Weight: 280.39
BoilingPoint<760mmHg>: 285 Flash Point: 92
Color and appearance: colorless transparent liquid Density<25>: 1.035
Refractive Index<25>: 1.427
+
0.0005
Min. Purity: 98.0%
Applications:
Vinyl silane is used as coupling agent, adhesion promoters, crosslinking agent.
Vinyl silane is used for sulfur and peroxide cured rubber, polyester, polyolefins, styrenics, and acrylics etc.
Vinyl silane is used to copolymerize with ethylene for moisture induced coupling of polyethylene.
Vinyl silane is used to graft to polyethylene for moisture induced coupling.
Vinyl silane is used for surface treatment of mineral fillers in plastics.
Silane couping agent
Vinyltris(2-methoxyethoxy)silane
CAS No.:1067-53-4
Silane couping agent
Introduction:
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture.
Typical Physical Properties:
CAS No.: 1067-53-4
Molecular Weight: 280.39
BoilingPoint<760mmHg>: 285 Flash Point: 92
Color and appearance: colorless transparent liquid Density<25>: 1.035
Refractive Index<25>: 1.427
+
0.0005
Min. Purity: 98.0%
Applications:
Vinyl silane is used as coupling agent, adhesion promoters, crosslinking agent.
Vinyl silane is used for sulfur and peroxide cured rubber, polyester, polyolefins, styrenics, and acrylics etc.
Vinyl silane is used to copolymerize with ethylene for moisture induced coupling of polyethylene.
Vinyl silane is used to graft to polyethylene for moisture induced coupling.
Vinyl silane is used for surface treatment of mineral fillers in plastics.
Dermax Liquid Nail Glue
Dermax Liquid Nail Glue
1. Easy application /Bonding most materials
2. Shelf Life: 18 months since produced
3. MOQ: 240pieces
PRODUCT DESCRIPTION
Dermax Liquid Nail Glue , also called No More Nail or Heavy duty construction adhesive. Just as its name implies, it is a revolutionary mighty adhesive replacement of nails. Its merits include avoiding construction strains, noises when construction and damages; and nails, hammers and churn drills are no longer needed. The Dermax liquid is a multi-functional adhesive production and is applied to adhesion of various indoor & outdoor environments and household products. Its features are high tenacity, non-embitterment, mighty adhesion, wide application, etc. its good performances, like good climatic resistance, convenient using method, small dosage, high cost performance, make it popular among construction & decoration, building construction, wood door manufacture, furniture factory, cupboard factory and indoor & outdoor construction industries.
APPLICATION
Wood, panel, skirt line, wood decoration line, splint and various frame
Adhesion of various plastic, PVC, PE, etc.
Tile, stone, glass, marble and cement
Various metals such as stainless steel sheet, aluminum sheet, etc.
Materials for outdoor advertisement, outdoor furniture and woodware
TECHNICAL DATA
Product name
Dermax Liquid Nails
Material
Synthetic rubber& resin
Appearance:
Smooth Paste
Colour
Beige ,White, Gray, Light yellow
Volume:
350ml
Specific Gravity
1.1 g/cm3
Cure Time
48 hours
Application Temperature
5°C to 50°C
Service Temperature
-10°C to +70°C
Packing
350ml/24pcs/ctn
Carton Size
30.5*20.5*24cm
Shelf Life
18 months since produced
MOQ
240 pieces
Sample
5-7days in usual
Lead-time
7-10 days after deposit received
Payment Terms
T/T or L/C
HOW TO USE:
1. Before bonding, the surfaces must be clean dry, take free of water, wax, dust, oil.
2. Cut nozzle at a 45 angle to desired size
3. A: 2step for horizontal
B: 4step for vertical or upside-down
CLEAN-UP
Use mineral spirits or an adhesive remover.
DISPOSAL
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.
CAUTIONS
This product is combustible so that contacting with other combustibles shall be avoided when using and storing. It shall be kept in a ventilated place and out of reach of children. If mis-swallow this product, go to a doctor immediately.
1. Easy application /Bonding most materials
2. Shelf Life: 18 months since produced
3. MOQ: 240pieces
PRODUCT DESCRIPTION
Dermax Liquid Nail Glue , also called No More Nail or Heavy duty construction adhesive. Just as its name implies, it is a revolutionary mighty adhesive replacement of nails. Its merits include avoiding construction strains, noises when construction and damages; and nails, hammers and churn drills are no longer needed. The Dermax liquid is a multi-functional adhesive production and is applied to adhesion of various indoor & outdoor environments and household products. Its features are high tenacity, non-embitterment, mighty adhesion, wide application, etc. its good performances, like good climatic resistance, convenient using method, small dosage, high cost performance, make it popular among construction & decoration, building construction, wood door manufacture, furniture factory, cupboard factory and indoor & outdoor construction industries.
APPLICATION
Wood, panel, skirt line, wood decoration line, splint and various frame
Adhesion of various plastic, PVC, PE, etc.
Tile, stone, glass, marble and cement
Various metals such as stainless steel sheet, aluminum sheet, etc.
Materials for outdoor advertisement, outdoor furniture and woodware
TECHNICAL DATA
Product name
Dermax Liquid Nails
Material
Synthetic rubber& resin
Appearance:
Smooth Paste
Colour
Beige ,White, Gray, Light yellow
Volume:
350ml
Specific Gravity
1.1 g/cm3
Cure Time
48 hours
Application Temperature
5°C to 50°C
Service Temperature
-10°C to +70°C
Packing
350ml/24pcs/ctn
Carton Size
30.5*20.5*24cm
Shelf Life
18 months since produced
MOQ
240 pieces
Sample
5-7days in usual
Lead-time
7-10 days after deposit received
Payment Terms
T/T or L/C
HOW TO USE:
1. Before bonding, the surfaces must be clean dry, take free of water, wax, dust, oil.
2. Cut nozzle at a 45 angle to desired size
3. A: 2step for horizontal
B: 4step for vertical or upside-down
CLEAN-UP
Use mineral spirits or an adhesive remover.
DISPOSAL
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.
CAUTIONS
This product is combustible so that contacting with other combustibles shall be avoided when using and storing. It shall be kept in a ventilated place and out of reach of children. If mis-swallow this product, go to a doctor immediately.
Dermax No More Nail Glue
Dermax No More Nail Glue
1. Easy application /Bonding most materials
2. Shelf Life: 18 months since produced
3. MOQ: 240piece
PRODUCT DESCRIPTION
Dermax Liquid Nail Glue , also called No More Nail or Heavy duty construction adhesive. Just as its name implies, it is a revolutionary mighty adhesive replacement of nails. Its merits include avoiding construction strains, noises when construction and damages; and nails, hammers and churn drills are no longer needed. The Dermax liquid is a multi-functional adhesive production and is applied to adhesion of various indoor & outdoor environments and household products. Its features are high tenacity, non-embitterment, mighty adhesion, wide application, etc. its good performances, like good climatic resistance, convenient using method, small dosage, high cost performance, make it popular among construction & decoration, building construction, wood door manufacture, furniture factory, cupboard factory and indoor & outdoor construction industries.
APPLICATION
Wood, panel, skirt line, wood decoration line, splint and various frame
Adhesion of various plastic, PVC, PE, etc.
Tile, stone, glass, marble and cement
Various metals such as stainless steel sheet, aluminum sheet, etc.
Materials for outdoor advertisement, outdoor furniture and woodware
TECHNICAL DATA
Product name
Dermax No More Nail Glue
Material
Synthetic rubber& resin
Appearance:
Smooth Paste
Colour
Beige ,White, Gray, Light yellow
Volume:
350ml
Specific Gravity
1.1 g/cm3
Cure Time
48 hours
Application Temperature
5°C to 50°C
Service Temperature
-10°C to +70°C
Packing
350ml/24pcs/ctn
Carton Size
30.5*20.5*24cm
Shelf Life
18 months since produced
MOQ
240 pieces
Sample
5-7days in usual
Lead-time
7-10 days after deposit received
Payment Terms
T/T or L/C
HOW TO USE:
1. Before bonding, the surfaces must be clean dry, take free of water, wax, dust, oil.
2. Cut nozzle at a 45 angle to desired size
3. A: 2step for horizontal
B: 4step for vertical or upside-down
CLEAN-UP
Use mineral spirits or an adhesive remover.
DISPOSAL
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.
CAUTIONS
This product is combustible so that contacting with other combustibles shall be avoided when using and storing. It shall be kept in a ventilated place and out of reach of children. If mis-swallow this product, go to a doctor immediately.
1. Easy application /Bonding most materials
2. Shelf Life: 18 months since produced
3. MOQ: 240piece
PRODUCT DESCRIPTION
Dermax Liquid Nail Glue , also called No More Nail or Heavy duty construction adhesive. Just as its name implies, it is a revolutionary mighty adhesive replacement of nails. Its merits include avoiding construction strains, noises when construction and damages; and nails, hammers and churn drills are no longer needed. The Dermax liquid is a multi-functional adhesive production and is applied to adhesion of various indoor & outdoor environments and household products. Its features are high tenacity, non-embitterment, mighty adhesion, wide application, etc. its good performances, like good climatic resistance, convenient using method, small dosage, high cost performance, make it popular among construction & decoration, building construction, wood door manufacture, furniture factory, cupboard factory and indoor & outdoor construction industries.
APPLICATION
Wood, panel, skirt line, wood decoration line, splint and various frame
Adhesion of various plastic, PVC, PE, etc.
Tile, stone, glass, marble and cement
Various metals such as stainless steel sheet, aluminum sheet, etc.
Materials for outdoor advertisement, outdoor furniture and woodware
TECHNICAL DATA
Product name
Dermax No More Nail Glue
Material
Synthetic rubber& resin
Appearance:
Smooth Paste
Colour
Beige ,White, Gray, Light yellow
Volume:
350ml
Specific Gravity
1.1 g/cm3
Cure Time
48 hours
Application Temperature
5°C to 50°C
Service Temperature
-10°C to +70°C
Packing
350ml/24pcs/ctn
Carton Size
30.5*20.5*24cm
Shelf Life
18 months since produced
MOQ
240 pieces
Sample
5-7days in usual
Lead-time
7-10 days after deposit received
Payment Terms
T/T or L/C
HOW TO USE:
1. Before bonding, the surfaces must be clean dry, take free of water, wax, dust, oil.
2. Cut nozzle at a 45 angle to desired size
3. A: 2step for horizontal
B: 4step for vertical or upside-down
CLEAN-UP
Use mineral spirits or an adhesive remover.
DISPOSAL
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.
CAUTIONS
This product is combustible so that contacting with other combustibles shall be avoided when using and storing. It shall be kept in a ventilated place and out of reach of children. If mis-swallow this product, go to a doctor immediately.
Dichloromethane 99.99%
Dichloromethane 99.99%
1 Excellent quality with competitive price
2 High Purity
3 stable supply
4 worldwide market
Dichloromethane 99.99%
Application
It has strong soluility and no toxicity etc.It is widely used formanufacturing safety film and orthocarbonate and can be
for solvent of paint,cleaner for metal,gas-fog spray agents,polyurethane foaming agent,mold-realease agent,paint remover as well as manufacture photographic film and has been used to remove caffeine from coffee.
Company Introduction
Dongying Jinhao Chemical Co,.Ltd ,our company specialized in basic inorganic and organic chemicals such as methylene chloride,chloroform,phenylamine and other related productsfor ten years in China.Our products is widely used both in domestic and international market due to the superior quality,service and competitive prices
We welcome you come to our company and will very happy to cooperate with you.
Looking forwrd to your news.
Contact
Tel 86-18766751232
Skype miya1985320
Contact person Miya
Website www.dyjinhao.cn
1 Excellent quality with competitive price
2 High Purity
3 stable supply
4 worldwide market
Dichloromethane 99.99%
Application
It has strong soluility and no toxicity etc.It is widely used formanufacturing safety film and orthocarbonate and can be
for solvent of paint,cleaner for metal,gas-fog spray agents,polyurethane foaming agent,mold-realease agent,paint remover as well as manufacture photographic film and has been used to remove caffeine from coffee.
Company Introduction
Dongying Jinhao Chemical Co,.Ltd ,our company specialized in basic inorganic and organic chemicals such as methylene chloride,chloroform,phenylamine and other related productsfor ten years in China.Our products is widely used both in domestic and international market due to the superior quality,service and competitive prices
We welcome you come to our company and will very happy to cooperate with you.
Looking forwrd to your news.
Contact
Tel 86-18766751232
Skype miya1985320
Contact person Miya
Website www.dyjinhao.cn
Dihydrogen Aluminium phosphate
1,phosphates
2,fire-proof material
3,repairing surface of iron furnace
4,best quality and best price
DIHYDROGEN ALUMINIUM PHOSPHATE
Molecular Formula: AL(H
2
PO
4
)
3
Molecular Weight:M=317.94
Name of index
Index
Result
Appearance
Powder
Up to grade
P2O5%
63-67
64
Al2O3%
15-17
15.8
Fe%
0.02max
<0.02
Appearance
White powder
Up to grade
Conclusion
Up to grade
Remark
As high-temperature adhesive agent, fire-proof material, flame-retardant print, fire proof cement and material for repairing surface of iron furnace ,it is widely used in electronics, electric industry, metallurgy, aviation , building material and also in high-temperature furnace and high-temperature equipment.
2,fire-proof material
3,repairing surface of iron furnace
4,best quality and best price
DIHYDROGEN ALUMINIUM PHOSPHATE
Molecular Formula: AL(H
2
PO
4
)
3
Molecular Weight:M=317.94
Name of index
Index
Result
Appearance
Powder
Up to grade
P2O5%
63-67
64
Al2O3%
15-17
15.8
Fe%
0.02max
<0.02
Appearance
White powder
Up to grade
Conclusion
Up to grade
Remark
As high-temperature adhesive agent, fire-proof material, flame-retardant print, fire proof cement and material for repairing surface of iron furnace ,it is widely used in electronics, electric industry, metallurgy, aviation , building material and also in high-temperature furnace and high-temperature equipment.
185E Epoxy Injection Adhesive for structure and building
1)This adhesion can be used in moist enviroment
2)Resistance to tensile and shear
3)High quality and competitive price...
YC185E Injection epoxy chemical anchor is a two component modified epoxy adhesive, A, B components have been placed inside the sized pipe. with the role of a dedicated injection gun, the two kinds of components that can be replaced in the own-type static mixers are fully mixed, injected directly into the borehole and quickly curing, so as to achieve the
purpose of a fixed object.
Appearance A:B=3:1
A
Plaster
B
Plaster
Adhesive property
Adhesive tensile strength (Map)
≥73
Splitting tensile strength
≥16.1
Bending strength (mpa)
≥64.4
Steel–steel
shear strength (Map)
≥25
Steel-concrete
bond strength (Map)
C30
14.2
C60
21.5
2)Resistance to tensile and shear
3)High quality and competitive price...
YC185E Injection epoxy chemical anchor is a two component modified epoxy adhesive, A, B components have been placed inside the sized pipe. with the role of a dedicated injection gun, the two kinds of components that can be replaced in the own-type static mixers are fully mixed, injected directly into the borehole and quickly curing, so as to achieve the
purpose of a fixed object.
Appearance A:B=3:1
A
Plaster
B
Plaster
Adhesive property
Adhesive tensile strength (Map)
≥73
Splitting tensile strength
≥16.1
Bending strength (mpa)
≥64.4
Steel–steel
shear strength (Map)
≥25
Steel-concrete
bond strength (Map)
C30
14.2
C60
21.5
Diphenyl phosphate(CAS:838-85-7)
Diphenyl phosphate
1.CAS: 838-85-7
2.Appearance:White crystal powder
Melting Point:60-70
Content:98.0%,97%...
Diphenyl phosphate
English Name Diphenyl phosphate
CAS# 838-85-7
Structural Formula:
Appearance: White crystal powder
Melting Point: 60-70°C
Content: ≥98.0%
1.CAS: 838-85-7
2.Appearance:White crystal powder
Melting Point:60-70
Content:98.0%,97%...
Diphenyl phosphate
English Name Diphenyl phosphate
CAS# 838-85-7
Structural Formula:
Appearance: White crystal powder
Melting Point: 60-70°C
Content: ≥98.0%
Dipute Rubber To Metal primer
An ideal Metal Primer for use in rubber tanks or chute lining, pulley lagging, and all applications where a bond to metal requir
An ideal Metal Primer for use in rubber tanks or chute lining, pulley lagging, and all applications where a bond to metal requires enhancement.
Features
1.As an interface between rubber and metal,
Dipute Rubber to Metal Primer
offers high bond strengths between both surfaces
2.Unlike zinc based primers, it utilizes polymers and organic compounds to achieve a high strength bond
3.Mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system
4.Can be used on steel, aluminum, titanium, wood and other substrates
5.Can be applied with a brush, roller or spray
An ideal Metal Primer for use in rubber tanks or chute lining, pulley lagging, and all applications where a bond to metal requires enhancement.
Features
1.As an interface between rubber and metal,
Dipute Rubber to Metal Primer
offers high bond strengths between both surfaces
2.Unlike zinc based primers, it utilizes polymers and organic compounds to achieve a high strength bond
3.Mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system
4.Can be used on steel, aluminum, titanium, wood and other substrates
5.Can be applied with a brush, roller or spray
Double Component Polysulfide Sealant
It used for high-grade highway ,airprt runway,swimming pool and water storage pool.
Product features:
Double component ploysulfide sealant is a two-component waterproof material which is singly packed and solidifies under ambient tempreture.It is also called sealing paste because it is a paste.The ploysulfide sealing paste is based on liquid polysulfide rubber,with addictive of various chemical assistants and ploymer material,processed with special synthesis procedures.It is a perfect poison-free waterproof sealing material.It features good aging resistance and water resistance,adhesion and elasticity.It could maintain good physical,chemical performance under codition of continous stretching,vibration and tempreture change.It has good adhesion to many metal and non-metal materials.
Application:
It is applicable for the waterproof sealing,crack repairing and corrosion proof and waterproof by coating for concrete deformation joints such as expansion and settlement joints in construction including irrigation works and municipal engineering,undergroud structures (tunnel ,subway ,pipelines for water supply and drain),high-grade highway ,airprt runway,swimming pool and water storage pool ,and for building nodes,expansion joints and construction joints inassembly type buildings.
The main technical indexes :
No
Item
Unit
Index
1
Density
g/cm
3
1.6-1.7
2
Adaptation period
h
2-6
3
Tack-free tim
e
≤
h
24
4
Exidation inde
x
≤
4
5
Rheology
Smooth and Even
6
Slumpin
g
≤
mm
3
7
Low temperature flexibilit
y
≥
°C
-30
8
Maximun tensile adhering strengt
h
≥
MPa
0.2
9
Maximun elongatio
n
≥
%
300
10
Elastic recover
y
≥
%
80
Construction
1. Making the base surface clean ,dry and oil free.
2. Adhering atain preventing tape on both sides of deformation joints to keep both sides from staining.
3. Full mixing component a(basic sealing past,yellow)and component b (solifier ,black)in proportion of 10:1 in the container;also acceptable to make the mixtures in proper proportion of 10:0.8-1.2 based on weather change.Generally the mixing shall be conducted for more than five minutes if mechanical mixing is adopted.
4. Filling the ploysulfide sealing paste into the joints with scrapers and scraping it. Generally the paste is filled in two steps,with the first step of scraping the paste onto both side of the joints,and second step of filling the joint and scraping it .The paster gun may be utilized,the conpactness shall be checked upon completion of construction ,and then the scraper used the tear off the stain-proof tape .
5. The prepared paste shall be used within two hours,and otherwise it will gradually solidify and cause difficulty to the construction.
6. It shall be kept from water and rain within 24 hours upon completion of construction.
Product features:
Double component ploysulfide sealant is a two-component waterproof material which is singly packed and solidifies under ambient tempreture.It is also called sealing paste because it is a paste.The ploysulfide sealing paste is based on liquid polysulfide rubber,with addictive of various chemical assistants and ploymer material,processed with special synthesis procedures.It is a perfect poison-free waterproof sealing material.It features good aging resistance and water resistance,adhesion and elasticity.It could maintain good physical,chemical performance under codition of continous stretching,vibration and tempreture change.It has good adhesion to many metal and non-metal materials.
Application:
It is applicable for the waterproof sealing,crack repairing and corrosion proof and waterproof by coating for concrete deformation joints such as expansion and settlement joints in construction including irrigation works and municipal engineering,undergroud structures (tunnel ,subway ,pipelines for water supply and drain),high-grade highway ,airprt runway,swimming pool and water storage pool ,and for building nodes,expansion joints and construction joints inassembly type buildings.
The main technical indexes :
No
Item
Unit
Index
1
Density
g/cm
3
1.6-1.7
2
Adaptation period
h
2-6
3
Tack-free tim
e
≤
h
24
4
Exidation inde
x
≤
4
5
Rheology
Smooth and Even
6
Slumpin
g
≤
mm
3
7
Low temperature flexibilit
y
≥
°C
-30
8
Maximun tensile adhering strengt
h
≥
MPa
0.2
9
Maximun elongatio
n
≥
%
300
10
Elastic recover
y
≥
%
80
Construction
1. Making the base surface clean ,dry and oil free.
2. Adhering atain preventing tape on both sides of deformation joints to keep both sides from staining.
3. Full mixing component a(basic sealing past,yellow)and component b (solifier ,black)in proportion of 10:1 in the container;also acceptable to make the mixtures in proper proportion of 10:0.8-1.2 based on weather change.Generally the mixing shall be conducted for more than five minutes if mechanical mixing is adopted.
4. Filling the ploysulfide sealing paste into the joints with scrapers and scraping it. Generally the paste is filled in two steps,with the first step of scraping the paste onto both side of the joints,and second step of filling the joint and scraping it .The paster gun may be utilized,the conpactness shall be checked upon completion of construction ,and then the scraper used the tear off the stain-proof tape .
5. The prepared paste shall be used within two hours,and otherwise it will gradually solidify and cause difficulty to the construction.
6. It shall be kept from water and rain within 24 hours upon completion of construction.
Double components super strength adhesive
1, Double components super strength adhesive
2, No priming
3, Super strength
4, Shelf life over 30 years
5, GB/T 16776-2005
1. Characteristics:
l Two Components, Neutral Curing at room temperature, Double components super strength adhesive;
l Excellent weatherproofing performance, shelf life reaches over 30 years in general weather condition;
l No need to prime coating, excellent joint to most building material;
l Excellent compatibility with other neutral silicone sealant
2. Main Purpose:
l Structural assembling for glass curtain-wall engineering;
l Can joint glass with metal part to a single assemble part to satisfy with design of full-hided or semi-exposed flame curtain wall;
l Secondary seal and joint structural insulating glass;
l Seal in the situation of high sealed security;
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Pot Life when 20min,S
≤10
3.4
GB/T 16776
Skin Time(h)
≤3
0.7
GB/T 13477
Hardness(HsA)
20-60
42
GB/T 531
Thermogravimetry(%)
≤10
2.1
GB/T 16776
Tentile Proper(MPA) in standard condition
≥0.60
0.96
GB/T 13477
Tentile Proper(MPA) at 90°C
≥0.45
0.74
GB/T 13477
Tentile Proper(MPA) at -30°C
≥0.45
1.27
GB/T 13477
Tentile Proper(MPA) after flooding
≥0.45
0.78
GB/T 13477
Tentile Proper(MPA) after flooding and UVA irradiation
≥0.45
0.69
GB/T 13477
Tentile Proper(MPA) AT 23°C Tensile Strength in Adhesion (%)
≥100
141
GB/T 13477
Storage
9 months shelf life if stored below 27°C in cool, dry places after the date of production
4. Application Standard: GB/T 16776-2005
5. Specification
l A component: 185L B component: 18.5L
l A component: 18.5L B component:300ml*7
l Color: white for A component, black for B component, black after mixed
6. Restriction of Usage:
Unsuitable for all kinds of material that effuse grease, plasticizer or solvent;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually flooding or entire-year moist places;
Cannot be used on the unclean or unstable substrate;
Cannot be used on the substrate surface under 6°C or above 40°C
Cannot be used on joint which bearing structural strength or places of physical damage.
7. Technology Service
l We supply integrate data, technical consultation and free compatibility test.
l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
l Please see “Operation Instruction to Girafe Silicone Sealant ”
9. Safety
l Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;
l Silicone sealant will not release any harmful substance and not be harmful to health after cured;
l Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
2, No priming
3, Super strength
4, Shelf life over 30 years
5, GB/T 16776-2005
1. Characteristics:
l Two Components, Neutral Curing at room temperature, Double components super strength adhesive;
l Excellent weatherproofing performance, shelf life reaches over 30 years in general weather condition;
l No need to prime coating, excellent joint to most building material;
l Excellent compatibility with other neutral silicone sealant
2. Main Purpose:
l Structural assembling for glass curtain-wall engineering;
l Can joint glass with metal part to a single assemble part to satisfy with design of full-hided or semi-exposed flame curtain wall;
l Secondary seal and joint structural insulating glass;
l Seal in the situation of high sealed security;
3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
Horizontal
Not change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Pot Life when 20min,S
≤10
3.4
GB/T 16776
Skin Time(h)
≤3
0.7
GB/T 13477
Hardness(HsA)
20-60
42
GB/T 531
Thermogravimetry(%)
≤10
2.1
GB/T 16776
Tentile Proper(MPA) in standard condition
≥0.60
0.96
GB/T 13477
Tentile Proper(MPA) at 90°C
≥0.45
0.74
GB/T 13477
Tentile Proper(MPA) at -30°C
≥0.45
1.27
GB/T 13477
Tentile Proper(MPA) after flooding
≥0.45
0.78
GB/T 13477
Tentile Proper(MPA) after flooding and UVA irradiation
≥0.45
0.69
GB/T 13477
Tentile Proper(MPA) AT 23°C Tensile Strength in Adhesion (%)
≥100
141
GB/T 13477
Storage
9 months shelf life if stored below 27°C in cool, dry places after the date of production
4. Application Standard: GB/T 16776-2005
5. Specification
l A component: 185L B component: 18.5L
l A component: 18.5L B component:300ml*7
l Color: white for A component, black for B component, black after mixed
6. Restriction of Usage:
Unsuitable for all kinds of material that effuse grease, plasticizer or solvent;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually flooding or entire-year moist places;
Cannot be used on the unclean or unstable substrate;
Cannot be used on the substrate surface under 6°C or above 40°C
Cannot be used on joint which bearing structural strength or places of physical damage.
7. Technology Service
l We supply integrate data, technical consultation and free compatibility test.
l Solving problem in the course of using timely
8. Joint Design and Operation Procedure
l Please see “Operation Instruction to Girafe Silicone Sealant ”
9. Safety
l Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;
l Silicone sealant will not release any harmful substance and not be harmful to health after cured;
l Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
Double components transparent waterproof RTV silicone potting rubber silicone pouring sealant
1) transparent waterproof RTV silicone
2) safe electrical performance
3) good heat resistance
4) accept sample orders
Double components transparent waterproof RTV silicone potting rubber silicone pouring sealant
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
2) safe electrical performance
3) good heat resistance
4) accept sample orders
Double components transparent waterproof RTV silicone potting rubber silicone pouring sealant
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
Double sided butyl tape
1.Doublesided butyl tape.
2.Gives best performance on weather resistance.
3.Non-solidified in its lifetime
4.Waterproof.
TOP BEST-660 Doublesided Waterproof Butyl Tape
1,Description
TOP BEST-660 waterproof butyl tape gives best performance on weather resistance, UV resistance, oxides resistance, and Non-solidified in its lifetime.
2,Uses
(1) Steel construction, sun panel, drains parts.
(2) Window & door; concrete roof; pipes.
(3) PC panel, repairing of roof and cars.
3,Advantage
(1) Non-solidified, flexible, good adaptability.
(2) Good anit-UV performance, water-proofing, life time up to 20 yeas.
1, Color: grey, black , white.
2, Package
Packed in carton, it can also laminate with non-woven cloth, signal face aluminum foil, PE and so on. Dimension is according to customer’s requirement.
6,Notice
(1)Surface must be dry and clean (remove any moisture, grease and dust).
(2)Butyl tape should be stored at room temperature and normal humidity, and kept away from sunshine and hot air.
(3)One time application can sure its best performance.
2.Gives best performance on weather resistance.
3.Non-solidified in its lifetime
4.Waterproof.
TOP BEST-660 Doublesided Waterproof Butyl Tape
1,Description
TOP BEST-660 waterproof butyl tape gives best performance on weather resistance, UV resistance, oxides resistance, and Non-solidified in its lifetime.
2,Uses
(1) Steel construction, sun panel, drains parts.
(2) Window & door; concrete roof; pipes.
(3) PC panel, repairing of roof and cars.
3,Advantage
(1) Non-solidified, flexible, good adaptability.
(2) Good anit-UV performance, water-proofing, life time up to 20 yeas.
1, Color: grey, black , white.
2, Package
Packed in carton, it can also laminate with non-woven cloth, signal face aluminum foil, PE and so on. Dimension is according to customer’s requirement.
6,Notice
(1)Surface must be dry and clean (remove any moisture, grease and dust).
(2)Butyl tape should be stored at room temperature and normal humidity, and kept away from sunshine and hot air.
(3)One time application can sure its best performance.
Double-Sided Carpet Tape
Features:
1) Material: cotton fiber
2) Width and length: according to clients' requests
3) Acr
Features:
1) Material: cotton fiber
2) Width and length: according to clients' requests
3) Acrylic adhesive
4) Double-sided
5) Resists water and mildew
6) Adheres items to the ground
7) Suitable for outdoor, showroom, carpet, basement and bathroom uses
1) Material: cotton fiber
2) Width and length: according to clients' requests
3) Acr
Features:
1) Material: cotton fiber
2) Width and length: according to clients' requests
3) Acrylic adhesive
4) Double-sided
5) Resists water and mildew
6) Adheres items to the ground
7) Suitable for outdoor, showroom, carpet, basement and bathroom uses
Dow corning quality silicone sealant
OPT5299 is two-component silicone sealant for the addition of heat sealant system, Heat resistance, heat aging resistance
OPT5299 Thermal Flame Retardant
Silicone Sealant
Features
OPT5299 is two-component silicone sealant for the addition of heat sealant system, has the following characteristics:
1, Under the condition of rubber mixture at room temperature storage time is longer, but can be quickly cured under heating conditions, particularly conducive to the use of automated production line.
2, Heat resistance, heat aging resistance. After curing in a wide temperature range (-60 ~ 250 °C) to maintain elasticity, excellent insulation properties
3, The curing process does not shrink, has better water moisture and anti-aging properties.
4, OPT906 flame retardant, flame retardant to UL94-V0 grade.
Typical Use
For a high-power electronic components, require a higher temperature of the cooling and power supply module and circuit board potting protection. Such as module encapsulation, car HID lamp module power supply, automotive ignition system power modules, solar panels, transformers, sensors and so on.
Use Technology
1, Them were placed in two groups matched by weighing the tank mixing evenly mixed.
2, The mixed infusion to be a good potting compound within the device, generally from time to vacuum deaeration, If you need to get high thermal conductivity, the proposed vacuum deaeration reperfusion. Curing at room temperature or heating can be. Rubber curing speed and curing temperature has a lot in the winter take a long time to cure, recommended heat curing method, 80 °C cured 15-30 minutes, room temperature curing will normally take around 8 hours.
Notes
:
1, plastic material should be sealed. Mixture should be a good run out of rubber, to avoid wastage.
2, this product is non-dangerous goods, but not imported and eyes.
3, prolonged storage, the rubber will be settlement of the fill. Please Stir use, does not affect performance.
4, glue contact with these chemicals in 906T will not cure:
1) N, P, S compounds.
2) Sn, Pb, Hg, As and other ionic compounds.
3) with alkynes and a number of vinyl compounds
Technical parameters before and after curing
Performance
OPT 5299B
OPT5299W
OPT 5299T
Before cured
appearance
A: Black liquids
B: White liquids
A: White liquids
B: White liquids
A: Transparent
liquids
B: Transparent liquids
A component viscosity (cps,25°C)
3500~5500
3500~5500
3500~5500
B Component viscosity (cps,25°C)
3500~5500
3500~5500
3500~5500
Operational performance
Two-component mixing ratio
(weight ratio)A:B
1:1
1:1
1:1
After mixing(cps)
3500~5500
3500~5500
3500~5500
Operating time(min,25°C)
80
80
80
Cure time(25degree) (min,25°C)
480
480
480
Cure time (80degree)(min,80°C)
20
20
20
After
cured
Hardness (
shore A
)
60-68
60-68
60-68
Thermal conductivity coefficient
[
(m·K)
]
≥0.85
≥0.85
≥0.85
Dielectric strength(kV/mm)
≥27
≥27
≥27
Dielectric strength (1.2MHz)
3.0~3.3
3.0~3.3
3.0~3.3
Volume resistivity(Ω·cm)
≥1.0×10
16
≥1.0×10
16
≥1.0×10
16
Linear expansion coefficient
[
m/(m·K)
]
≤2.2×10
-4
≤2.2×10
-4
≤2.2×10
-4
Linear expansion coefficient
[
m/(m·K)
]
3.0~3.3
3.0~3.3
3.0~3.3
Resistance to burning
≥1.0×10
16
≥1.0×10
16
≥1.0×10
16
OPT5299 Thermal Flame Retardant
Silicone Sealant
Features
OPT5299 is two-component silicone sealant for the addition of heat sealant system, has the following characteristics:
1, Under the condition of rubber mixture at room temperature storage time is longer, but can be quickly cured under heating conditions, particularly conducive to the use of automated production line.
2, Heat resistance, heat aging resistance. After curing in a wide temperature range (-60 ~ 250 °C) to maintain elasticity, excellent insulation properties
3, The curing process does not shrink, has better water moisture and anti-aging properties.
4, OPT906 flame retardant, flame retardant to UL94-V0 grade.
Typical Use
For a high-power electronic components, require a higher temperature of the cooling and power supply module and circuit board potting protection. Such as module encapsulation, car HID lamp module power supply, automotive ignition system power modules, solar panels, transformers, sensors and so on.
Use Technology
1, Them were placed in two groups matched by weighing the tank mixing evenly mixed.
2, The mixed infusion to be a good potting compound within the device, generally from time to vacuum deaeration, If you need to get high thermal conductivity, the proposed vacuum deaeration reperfusion. Curing at room temperature or heating can be. Rubber curing speed and curing temperature has a lot in the winter take a long time to cure, recommended heat curing method, 80 °C cured 15-30 minutes, room temperature curing will normally take around 8 hours.
Notes
:
1, plastic material should be sealed. Mixture should be a good run out of rubber, to avoid wastage.
2, this product is non-dangerous goods, but not imported and eyes.
3, prolonged storage, the rubber will be settlement of the fill. Please Stir use, does not affect performance.
4, glue contact with these chemicals in 906T will not cure:
1) N, P, S compounds.
2) Sn, Pb, Hg, As and other ionic compounds.
3) with alkynes and a number of vinyl compounds
Technical parameters before and after curing
Performance
OPT 5299B
OPT5299W
OPT 5299T
Before cured
appearance
A: Black liquids
B: White liquids
A: White liquids
B: White liquids
A: Transparent
liquids
B: Transparent liquids
A component viscosity (cps,25°C)
3500~5500
3500~5500
3500~5500
B Component viscosity (cps,25°C)
3500~5500
3500~5500
3500~5500
Operational performance
Two-component mixing ratio
(weight ratio)A:B
1:1
1:1
1:1
After mixing(cps)
3500~5500
3500~5500
3500~5500
Operating time(min,25°C)
80
80
80
Cure time(25degree) (min,25°C)
480
480
480
Cure time (80degree)(min,80°C)
20
20
20
After
cured
Hardness (
shore A
)
60-68
60-68
60-68
Thermal conductivity coefficient
[
(m·K)
]
≥0.85
≥0.85
≥0.85
Dielectric strength(kV/mm)
≥27
≥27
≥27
Dielectric strength (1.2MHz)
3.0~3.3
3.0~3.3
3.0~3.3
Volume resistivity(Ω·cm)
≥1.0×10
16
≥1.0×10
16
≥1.0×10
16
Linear expansion coefficient
[
m/(m·K)
]
≤2.2×10
-4
≤2.2×10
-4
≤2.2×10
-4
Linear expansion coefficient
[
m/(m·K)
]
3.0~3.3
3.0~3.3
3.0~3.3
Resistance to burning
≥1.0×10
16
≥1.0×10
16
≥1.0×10
16
DowCorning(Z-6011)
A versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds...
A versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds...
Silane coupling Agent KH-550
KH-550 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials.
Typical Physical Properties
:
CAS No.: 919-30-2
Molecular Weight: 221.30
Boiling Point<760mmHg>: 215
Viscosity<25>: 2 cSt
Flash Point: 96
Color and Appearance: Colorless transparent liquid
Density<25/25>: 0.9450-0.9550
Refractive Index<25>: 1.420
+
0.0005
Min. Purity: 98.0%
Solubility:
KH-550 is completely and immediately soluble in water<with reaction>, alcohol, aromatic and aliphatic hydrocarbons. Ketones are not recommended as diluents.
A versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds...
Silane coupling Agent KH-550
KH-550 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials.
Typical Physical Properties
:
CAS No.: 919-30-2
Molecular Weight: 221.30
Boiling Point<760mmHg>: 215
Viscosity<25>: 2 cSt
Flash Point: 96
Color and Appearance: Colorless transparent liquid
Density<25/25>: 0.9450-0.9550
Refractive Index<25>: 1.420
+
0.0005
Min. Purity: 98.0%
Solubility:
KH-550 is completely and immediately soluble in water<with reaction>, alcohol, aromatic and aliphatic hydrocarbons. Ketones are not recommended as diluents.
DowCorning(Z-6172)
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated
Silane couping agent
Vinyltris(2-methoxyethoxy)silane
CAS No.:1067-53-4
Silane couping agent
Introduction:
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture.
Typical Physical Properties:
CAS No.: 1067-53-4
Molecular Weight: 280.39
BoilingPoint<760mmHg>: 285 Flash Point: 92
Color and appearance: colorless transparent liquid Density<25>: 1.035
Refractive Index<25>: 1.427
+
0.0005
Min. Purity: 98.0%
Applications:
Vinyl silane is used as coupling agent, adhesion promoters, crosslinking agent.
Vinyl silane is used for sulfur and peroxide cured rubber, polyester, polyolefins, styrenics, and acrylics etc.
Vinyl silane is used to copolymerize with ethylene for moisture induced coupling of polyethylene.
Vinyl silane is used to graft to polyethylene for moisture induced coupling.
Vinyl silane is used for surface treatment of mineral fillers in plastics.
Silane couping agent
Vinyltris(2-methoxyethoxy)silane
CAS No.:1067-53-4
Silane couping agent
Introduction:
KH-172 is a vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture.
Typical Physical Properties:
CAS No.: 1067-53-4
Molecular Weight: 280.39
BoilingPoint<760mmHg>: 285 Flash Point: 92
Color and appearance: colorless transparent liquid Density<25>: 1.035
Refractive Index<25>: 1.427
+
0.0005
Min. Purity: 98.0%
Applications:
Vinyl silane is used as coupling agent, adhesion promoters, crosslinking agent.
Vinyl silane is used for sulfur and peroxide cured rubber, polyester, polyolefins, styrenics, and acrylics etc.
Vinyl silane is used to copolymerize with ethylene for moisture induced coupling of polyethylene.
Vinyl silane is used to graft to polyethylene for moisture induced coupling.
Vinyl silane is used for surface treatment of mineral fillers in plastics.
186 water and heating supply sealant
applicable for sealing when installing drinking water system,with a wide scope of application
color:red
186 Special sealant for water and heating supply pipes and pipelines:
It is applicable for sealing when installing drinking water system,with a wide scope of application.
Medium strength
Good resistance against chemical media and corrosion.
With a pressure capacity of 20Mpa,it is used for screw-thread sealing for water and heating supply pipelines,with pressure test to be conducted in 4-8hours,easy to be removed.
Technical Date Sheet
Product Number
Typical application
Max fill-up clearance(mm)
Color
Viscosity GB/T2794-1995mPa.
Failure moment(N.m)
Pressure test time(h)
Working temperature°C
Initial curing time(h)
Full curing time(h)
186
LGP pipelines sealing
0.13
Red
1800
8
4-8
-50~149
0.5
24
186
Screw-thread sealing for water and heating supply pipelines
0.13
Red
2000-3000
10
4-8
-50~150
0.5
24
color:red
186 Special sealant for water and heating supply pipes and pipelines:
It is applicable for sealing when installing drinking water system,with a wide scope of application.
Medium strength
Good resistance against chemical media and corrosion.
With a pressure capacity of 20Mpa,it is used for screw-thread sealing for water and heating supply pipelines,with pressure test to be conducted in 4-8hours,easy to be removed.
Technical Date Sheet
Product Number
Typical application
Max fill-up clearance(mm)
Color
Viscosity GB/T2794-1995mPa.
Failure moment(N.m)
Pressure test time(h)
Working temperature°C
Initial curing time(h)
Full curing time(h)
186
LGP pipelines sealing
0.13
Red
1800
8
4-8
-50~149
0.5
24
186
Screw-thread sealing for water and heating supply pipelines
0.13
Red
2000-3000
10
4-8
-50~150
0.5
24
DowCorning(Z-6341)
KH-350 is high purity, undiluted N-octyltriethoxy-silane.
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane;Triethoxyoctylsilane
CAS No.: 2943-75-1
Silane coupling agent KH-350
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane; Triethoxyoctylsilane
CAS No.: 2943-75-1
Structure formula:
FEATURES
Can be used in the formulation of water repellent products
Produces a hydrophobic treatment that inhibits water absorption
Can improve dispersion of polar fillers in covalent matrices
BENEFITS
Small molecular structure for deep penetration of concrete surfaces
Surface modification can improve compatibility to nonpolar substrates
APPLICATIONS
Commercial buildings
Parking decks/garages
Highways
Bridge structures
Filler modification
TYPICAL PROPERTIES
Color Clear
Purity 98%
Specific Gravity at 25°C (77°F) 0.875
Flash Point, closed cup 63 (>145)
Density °C (°F)73
Volatile Organic Compound (VOC) Content lb/gal 329
Solvent (Thinner)Isopropanol, ethanol or various
DESCRIPTION
KH-350 is high purity, undiluted N-octyltriethoxy-silane. When diluted with an appro-priate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.
KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.
KH-350 is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.
HOW TO USE
Dilution
It can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane Typical dilution levels are 40 percent and 20 percent KH-350 in a solvent.
Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface. Refer to the manufacturers data sheet for proper handling and disposal of solvents.
NOTE: When using any solvent, always provide adequate ventilation. Follow handling precautions on the solvent container label.
Application
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets.
A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils and other contaminants. Formulated KH-350 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.
Any plants or shrubs should be protected from exposure to the treatment. Any material that should not be exposed to solvents should also be protected.
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane;Triethoxyoctylsilane
CAS No.: 2943-75-1
Silane coupling agent KH-350
Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane; Triethoxyoctylsilane
CAS No.: 2943-75-1
Structure formula:
FEATURES
Can be used in the formulation of water repellent products
Produces a hydrophobic treatment that inhibits water absorption
Can improve dispersion of polar fillers in covalent matrices
BENEFITS
Small molecular structure for deep penetration of concrete surfaces
Surface modification can improve compatibility to nonpolar substrates
APPLICATIONS
Commercial buildings
Parking decks/garages
Highways
Bridge structures
Filler modification
TYPICAL PROPERTIES
Color Clear
Purity 98%
Specific Gravity at 25°C (77°F) 0.875
Flash Point, closed cup 63 (>145)
Density °C (°F)73
Volatile Organic Compound (VOC) Content lb/gal 329
Solvent (Thinner)Isopropanol, ethanol or various
DESCRIPTION
KH-350 is high purity, undiluted N-octyltriethoxy-silane. When diluted with an appro-priate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.
KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.
KH-350 is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.
HOW TO USE
Dilution
It can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane Typical dilution levels are 40 percent and 20 percent KH-350 in a solvent.
Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface. Refer to the manufacturers data sheet for proper handling and disposal of solvents.
NOTE: When using any solvent, always provide adequate ventilation. Follow handling precautions on the solvent container label.
Application
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets.
A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils and other contaminants. Formulated KH-350 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.
Any plants or shrubs should be protected from exposure to the treatment. Any material that should not be exposed to solvents should also be protected.
Dowcoring Based Acetoxy Silicone Sealant
YN50 High Quality Silicone Sealant is an acid fast curing silicone for a range of general sealing and glazing applications.
YN50 High Quality Silicone Sealant is an acid fast curing silicone for a range of general sealing and glazing applications. It is suitable for using on common non-porous building material. It has excellent physical properties which are designed to give outstanding durability and performance.
Usages
:
1.Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. General Sealing around windows , doors,storefront, show window, diagonal and skylight corner line. It also can be used in bathroom to seal.
4. Connection and expansion joints
Colours:
YN50 acetoxy silicone sealant is available in clear, black and white colours.Special colours can be done per buyer’s request.
Package:
80ml in a tube. 280ml,300ml or 310ml in a standard cartridge or by drum. Special packing can also be done according to customer’s demand.
Storage
:
Keep in dry place; don’t unseal it before use; keep a storage temperature below 25°C to prolong its service life; 12 moths guarantee after production date.
Technical Date Sheet
:
No
Item
YN50 Acetoxy Silicone Sealant
1
Type
Acetoxy
2
Colour
Clear, white, black
3
Density( g/cm
3
)
0.96
4
Skin Drying Time(Min)
10-15
5
Curing Time(Hours)
24-32
6
Adhesive
good
7
UV resistance
good
8
Shelf Life
12 months
9
Elastical Recovery (%)
95%
10
Temperature resistance
+50°Cto +100°C
11
Application temperature
-20°C to + 45°C
YN50 High Quality Silicone Sealant is an acid fast curing silicone for a range of general sealing and glazing applications. It is suitable for using on common non-porous building material. It has excellent physical properties which are designed to give outstanding durability and performance.
Usages
:
1.Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. General Sealing around windows , doors,storefront, show window, diagonal and skylight corner line. It also can be used in bathroom to seal.
4. Connection and expansion joints
Colours:
YN50 acetoxy silicone sealant is available in clear, black and white colours.Special colours can be done per buyer’s request.
Package:
80ml in a tube. 280ml,300ml or 310ml in a standard cartridge or by drum. Special packing can also be done according to customer’s demand.
Storage
:
Keep in dry place; don’t unseal it before use; keep a storage temperature below 25°C to prolong its service life; 12 moths guarantee after production date.
Technical Date Sheet
:
No
Item
YN50 Acetoxy Silicone Sealant
1
Type
Acetoxy
2
Colour
Clear, white, black
3
Density( g/cm
3
)
0.96
4
Skin Drying Time(Min)
10-15
5
Curing Time(Hours)
24-32
6
Adhesive
good
7
UV resistance
good
8
Shelf Life
12 months
9
Elastical Recovery (%)
95%
10
Temperature resistance
+50°Cto +100°C
11
Application temperature
-20°C to + 45°C
Drum silicone sealant
RAW MATERIAL WITH GOOD QUALITY AND COMPETITIVE PRICE
Property:
Acid & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction:
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.
Use:
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Property:
Acid & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction:
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.
Use:
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Dry mortar adhesive MC
1.Appearance: White powder or granule
2.Fitneness, mesh: 80,100,200
3.Gelling temperature: 53-67
Dry mortar adhesive MC
Dry mortar adhesive MC
Appearance:
Technical requirements
Product
MC
MC
MK
Methoxyl content,%
27.5-32.0
19.0-24.0
Hydoxy propoxy content,%
4.0-12.0
Gelling temperature,°C
53-67
70-90
Moisture content,%
≤5.0
Ash,%
≤1.0
PH Value
4-8
Appearance
White powder or granule
Fineness,mesh
80,100,120
Viscosity,mPa.s
See viscosity table
Viscosity table
Viscosity type
Viscosity range,mPa.s
5
3-9
15
10-20
25
20-30
50
40-60
100
80-120
400
300-500
1500
1200-1800
4000
3600-5500
8000
7000-9000
10000
9000-11000
15000
13000-17000
20000
18000-22000
40000
36000-45000
60000
56000-65000
75000
70000-80000
100000
85000-130000
150000
130000-180000
200000
above180000
Application:
water retention,Workability,Binding,Slipping-redistant,Coating powder
Company Address
Room 509,Floor 5,Jiman Business Center,Street No. 3233,Road Zhenbei,District Putuo,Shanghai
Cnn: Ivy peng
Mobile:0086-13641964092
Tel.: 0086-21-62503072
Fax: 0086-21-62503076
2.Fitneness, mesh: 80,100,200
3.Gelling temperature: 53-67
Dry mortar adhesive MC
Dry mortar adhesive MC
Appearance:
Technical requirements
Product
MC
MC
MK
Methoxyl content,%
27.5-32.0
19.0-24.0
Hydoxy propoxy content,%
4.0-12.0
Gelling temperature,°C
53-67
70-90
Moisture content,%
≤5.0
Ash,%
≤1.0
PH Value
4-8
Appearance
White powder or granule
Fineness,mesh
80,100,120
Viscosity,mPa.s
See viscosity table
Viscosity table
Viscosity type
Viscosity range,mPa.s
5
3-9
15
10-20
25
20-30
50
40-60
100
80-120
400
300-500
1500
1200-1800
4000
3600-5500
8000
7000-9000
10000
9000-11000
15000
13000-17000
20000
18000-22000
40000
36000-45000
60000
56000-65000
75000
70000-80000
100000
85000-130000
150000
130000-180000
200000
above180000
Application:
water retention,Workability,Binding,Slipping-redistant,Coating powder
Company Address
Room 509,Floor 5,Jiman Business Center,Street No. 3233,Road Zhenbei,District Putuo,Shanghai
Cnn: Ivy peng
Mobile:0086-13641964092
Tel.: 0086-21-62503072
Fax: 0086-21-62503076
Dust Proof Garment using hot melt adhesive
Dust Proof Garment using hot melt adhesive
strong adhesion ,environmental protection
Dust Proof Garment using hot melt adhesive:
1) Feature:strong adhesion ,environmental protection
2) Application : Dust Proof Garment,Chemical Proof Garment,Medical Garment
3) Color : transparent , white,grey ...( available for different requirement )
4) Thickness : 0.10mm , 0.12mm ,0.15mm . ( available for different requirement )
strong adhesion ,environmental protection
Dust Proof Garment using hot melt adhesive:
1) Feature:strong adhesion ,environmental protection
2) Application : Dust Proof Garment,Chemical Proof Garment,Medical Garment
3) Color : transparent , white,grey ...( available for different requirement )
4) Thickness : 0.10mm , 0.12mm ,0.15mm . ( available for different requirement )
E-1501p (EVA hot melt adhesive powder)
1.Brand:Farseeing
2.Name:E-1501p (EVA hot melt adhesive powder)
3.Specification:E1501p
4.Material:EVA
5.Tel:0086-18939758527
E-1501p (EVA hot melt adhesive powder)
Hotmelt adhesive powder(E1501p)
Type:
E1501p
Material:
EVA
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
screen heat transfer printing,flocking,interlining, automotive upholstery and other fields.
Substrates:
kinds of non-laundrying fabrics,leather,wooden materials,paper,plastic and other materials.
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
E1501p
75-90
150
100
90-120
0.5-1.5
10-20
No
No
2.Name:E-1501p (EVA hot melt adhesive powder)
3.Specification:E1501p
4.Material:EVA
5.Tel:0086-18939758527
E-1501p (EVA hot melt adhesive powder)
Hotmelt adhesive powder(E1501p)
Type:
E1501p
Material:
EVA
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
screen heat transfer printing,flocking,interlining, automotive upholstery and other fields.
Substrates:
kinds of non-laundrying fabrics,leather,wooden materials,paper,plastic and other materials.
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
E1501p
75-90
150
100
90-120
0.5-1.5
10-20
No
No
E-1501p (EVA hot melt adhesive powder)
1.Brand:Farseeing
2.Name:E-1501p (EVA hot melt adhesive powder)
3.Specification:E-1501p
4.Material:EVA
5.0086-18939758527
Hot melt adhesive powder(E1501p)
Type:
E1501p
Material:
EVA
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
screen heat transfer printing,flocking,interlining, automotive upholstery and other fields.
Substrates:
kinds of non-laundrying fabrics,leather,wooden materials,paper,plastic and other materials.
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
E1501p
75-90
150
100
90-120
0.5-1.5
10-20
No
No
2.Name:E-1501p (EVA hot melt adhesive powder)
3.Specification:E-1501p
4.Material:EVA
5.0086-18939758527
Hot melt adhesive powder(E1501p)
Type:
E1501p
Material:
EVA
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
screen heat transfer printing,flocking,interlining, automotive upholstery and other fields.
Substrates:
kinds of non-laundrying fabrics,leather,wooden materials,paper,plastic and other materials.
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
E1501p
75-90
150
100
90-120
0.5-1.5
10-20
No
No
EA2001/H2001 EPOXY ADHESIVES
Two component epoxy adhesives. High mechnical bonding strength with long potlife 90 minutes.
LiONBOND EA2001/H2001 epoxy adhesives is a multipurpose, two component, room temperature curing, high viscosity adhesive of high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubber, rigid plastics and most other materials in common use. It is a versatile adhesive for the craftsman as well as most industrial applications.
Both applucation include industry field and consumer DIY.
LiONBOND EA2001/H2001 epoxy adhesives is a multipurpose, two component, room temperature curing, high viscosity adhesive of high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubber, rigid plastics and most other materials in common use. It is a versatile adhesive for the craftsman as well as most industrial applications.
Both applucation include industry field and consumer DIY.
EP-500 epoxy resin light-emitting diode for LED strip
EP-500 epoxy resin light-emitting diode for LED strip
1.excellent deaeration
2.high reliability
3.high light transmittance
INTRODUCTION
EP-500 epoxy resin light-emitting diode for LED striphas been specially developed for electronic components encapsulation with high reliability. It is composed of three parts, including Resin EP-500A, Hardener EP-500B and light diffusant agent. Owing to low viscosity, it can be handled easily. The cured resin possesses excellent mechanical strength, electrical properties and humidity resistance.
Properties
EP-500A
EP-500B
Color
Clear, light blue
Clear, light yellow
Viscosity cps/40
°C
1,000~1,400
30~50
Specific gravity
1.160
1.159
Application conditions
Mix Ration (weight)
EP-500A:EP-500B=100:100
Mix Viscosity cps/25
°C
500~700
Pot Life (at 25
°C
)
6 hrs (After Mixing)
Cure
130°C*35~40 min (Demold)
Post Cure
120°C*4~5hrs
Cured properties
Hardness (Shore D)
88
Volume resistivity ohm-cm
>10
15
Surface resistivity ohm
>10
14
Dielectric constant/KHZ
3.15
Thermal expansion coefficient mm/mm *
°C
6.0*10
-5
Water absorption (100
°C
*1 hr)%
0.35
Glass transition temperature
°C
125
1.excellent deaeration
2.high reliability
3.high light transmittance
INTRODUCTION
EP-500 epoxy resin light-emitting diode for LED striphas been specially developed for electronic components encapsulation with high reliability. It is composed of three parts, including Resin EP-500A, Hardener EP-500B and light diffusant agent. Owing to low viscosity, it can be handled easily. The cured resin possesses excellent mechanical strength, electrical properties and humidity resistance.
Properties
EP-500A
EP-500B
Color
Clear, light blue
Clear, light yellow
Viscosity cps/40
°C
1,000~1,400
30~50
Specific gravity
1.160
1.159
Application conditions
Mix Ration (weight)
EP-500A:EP-500B=100:100
Mix Viscosity cps/25
°C
500~700
Pot Life (at 25
°C
)
6 hrs (After Mixing)
Cure
130°C*35~40 min (Demold)
Post Cure
120°C*4~5hrs
Cured properties
Hardness (Shore D)
88
Volume resistivity ohm-cm
>10
15
Surface resistivity ohm
>10
14
Dielectric constant/KHZ
3.15
Thermal expansion coefficient mm/mm *
°C
6.0*10
-5
Water absorption (100
°C
*1 hr)%
0.35
Glass transition temperature
°C
125
186 Special sealant for fuel-gas pipeliness
1.Medium strength,Good resistance against media
2.fill-up clearance(mm):0.13
3.With a pressure capacity of 20Mpa
186 Special sealant for fuel-gas pipeliness:
Medium strength,Good resistance against media
With a pressure capacity of 20Mpa,it is applicable for sealing pipelines of natural gas and LPG.with pressure test to be conducted in 4-8hours,easy to be removed.
Technical Date Sheet
Product Number
Typical application
Max fill-up clearance(mm)
Color
Viscosity GB/T2794-1995mPa.
Failure moment(N.m)
Pressure test time(h)
Working temperature°C
Initial curing time(h)
Full curing time(h)
186
LGP pipelines sealing
0.13
Red
1800
8
4-8
-50~149
0.5
24
186
Screw-thread sealing for water and heating supply pipelines
0.13
Red
2000-3000
10
4-8
-50~150
0.5
24
2.fill-up clearance(mm):0.13
3.With a pressure capacity of 20Mpa
186 Special sealant for fuel-gas pipeliness:
Medium strength,Good resistance against media
With a pressure capacity of 20Mpa,it is applicable for sealing pipelines of natural gas and LPG.with pressure test to be conducted in 4-8hours,easy to be removed.
Technical Date Sheet
Product Number
Typical application
Max fill-up clearance(mm)
Color
Viscosity GB/T2794-1995mPa.
Failure moment(N.m)
Pressure test time(h)
Working temperature°C
Initial curing time(h)
Full curing time(h)
186
LGP pipelines sealing
0.13
Red
1800
8
4-8
-50~149
0.5
24
186
Screw-thread sealing for water and heating supply pipelines
0.13
Red
2000-3000
10
4-8
-50~150
0.5
24
EP1310 COB seaied Epoxy Adhesives
1. shear thinning.
2. excellent moisture strength,high electronic properties.
EP1310 epoxy adhesive is mainly applied to COB chips, and fill cofferdam seaied.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
45000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
80
°C
*
30min
2. excellent moisture strength,high electronic properties.
EP1310 epoxy adhesive is mainly applied to COB chips, and fill cofferdam seaied.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
45000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
80
°C
*
30min
EP1311 sealant
1. Low viscosity,fast cure.
2. Excellent protection to printed circuit boards from soldering failure.
EP1311 series has low viscosity,fast cure speed,good repair properties,when heated it provides a uniform and void free underfill layer, which gives excellent protection to printed circuit boards from soldering failure due to impact and thermal cycling.reinforce the stability of component.
2. Excellent protection to printed circuit boards from soldering failure.
EP1311 series has low viscosity,fast cure speed,good repair properties,when heated it provides a uniform and void free underfill layer, which gives excellent protection to printed circuit boards from soldering failure due to impact and thermal cycling.reinforce the stability of component.
EP2221 inductance adhesive Epoxy Adhesives
1. shear thinning.
2. excellent moisture strength,high electronic properties.
EP2221 epoxy adhesives are mainly applied in inductance coil industry, it is suitable for various inductance adhesive.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
120000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
120
°C*60min
2. excellent moisture strength,high electronic properties.
EP2221 epoxy adhesives are mainly applied in inductance coil industry, it is suitable for various inductance adhesive.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
120000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
120
°C*60min
Subscribe to:
Posts (Atom)