Mono-2-acryloyloxyethyl Succinate (MAES)

This acrylat Molecular Formula:C9H12O6
Molecular Weight:216.19
MOL File:50940-49-3.mol
CB Number:CB1463774
Acidic acrylate resin;
This acrylat Molecular Formula:C9H12O6
Molecular Weight:216.19
MOL File:50940-49-3.mol
CB Number:CB1463774

Mono-2-acryloyloxyethyl Succinate

This acrylat Molecular Formula:C9H12O6
Molecular Weight:216.19
MOL File:50940-49-3.mol
CB Number:CB1463774
Acidic acrylate resin;
This acrylat Molecular Formula:C9H12O6
Molecular Weight:216.19
MOL File:50940-49-3.mol
CB Number:CB1463774

Monoacryloyloxyethy Hexahydrophthalate (MAHP)

Other name:MAHP
CAS number:57043-35-3
MF:C13H18O6
CBNumber: CB6947185
MOL File:57043-35-3.mol
Acidic acrylate resin;

Monoacryloyloxyethy Hexahydrophthalate (MAHP)

This acrylate CBNumber: CB6947185
MOL File:57043-35-3.mol
Acidic acrylate resin;

Motor Balancing Cement Gum

SW-917 good use a variety of wound rotor and cast-aluminum rotor surface calibrate
Performance:SW-917 Epoxy balancing cements contain first and second compoundings,soft and miscible,no sticky,easy to use and good thixotropy,no flow when heating cure;have good cementing power to loops and cast-aluminum rotor,have good insulativity.fast curing in room temperature.
Application
:
SW-917 good use a variety of wound rotor and cast-aluminum rotor surface calibrate,for example automotivemotor, der gleichstrommotor.Otherwose can be used envelopment,patch and bonding fixing stuff.

Product
Appearance
Operating time
Density(g/cm3)
Curing time (h)

SW-917

First compounding
Yellow plasticene

2h@25°C

2.4

25°C@12h
Second compoundings
Blue plasticene

Moulded FEP rod

FEP is a modified category of PTFE. It remains basically the properties of PTFE, like excellent high- low-temperature resistance
Main technical indicators of FEP
Indicator
Unit
Indicator figure
Rod, sheet
Tube, membrane
density
g/cm
3
2.14-2.17
Tensile strength
Mpa
20
14
Ultimate elongation
%
200
175
Temperature range
°C
- 196-200
Dielectricity strength
Kv/mm
15







Specification and application of FET products
FEP sheet, membrane

Unit:mm
Type
Thickness
Width
Length
Application
Molded sheet
1-50
100-400
100-400
Anti-corrosion, seal, anti-
friction, insulation parts
Blow molded membrane
0.03-0.2
Folded diameter
600
10000
Anti-corrosion, anti-
adhesiveness, photic parts, capacitor insulation
Extruded sheet
0.05-0.5
Folded diameter 500
10000
FEP sheet, membrane is compatible to corresponding standard.






FEP rod, tube
Unit:mm
Type
Diameter
Length
Application
molded rod
5- 20
200
anti-corrosion, seal, antifriction insulating parts.
25- 100
100-150
Extruded tube
3- 25
Any length
Feeding pipe for corrosion fluid, protection pipe for wire.
26- 200
4200
FEP rod and tube products are compatible to corresponding standard.

Moulded PVDF boards

Specification:1M*2M length, 8-80mm thickness.
Characteristic:good mechanical properties,wheatherability,anti-radiation.
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000

PVDF sheet ,Board conforms to the respective standards



Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .

3 Epoxy Resin exterior tile adhesive for Construction

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)

Mouse Capturing HotMelt Glue with Peanut Butter Flavor

HotMelt Glue
1.Shape:Block,Strong stick force
2.Excellent UV resistance
3.Not flowing during high temperature
4.SGS
HotMelt Glue for Mouse Capturing with Peanut Butter Flavor

Hotmelt Glue Feature:
light color, strong stick force, excellent UV resistance, not flowing during high temperature etc..
Hotmelt Glue Usage:
adhesive used for capturing mouse in the houses, supermarkets, warehouses and other indoor and outdoor etc.

Hotmelt Glue Technical Parameters:

Properties
Specification value
Test Method and equipment
Shape/Appearance
yellow in block
Visual
Solid Content
100%

Base
High polymer

Soften Point
70±3 degree
GB/T 15332 Softening point tester
Viscosity
210±100CPS at 180 degree
SNB-2 Digital Rotational Viscometer, 27# rotor test


Storage period:
2 Years (indoor, unexposed to the sunlight, not more than 40 °C)

Method for clearing equipment:
You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 °C.After clean-up, flush it by the same hot melt adhesive not more than 170 °C.

Safety Precautions:
To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180°C . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt.

Package:
For adhesive in block shaped, each piece is about 500g and packed by release paper, then put in paper carton, 20Kg/CTN

Multi Epoxy Putty Stick

Multi Epoxy Putty Stick
Multi epoxy putty stick moulds to concrete floors, cubing
Multi Epoxy Putty Stick
Shelf life: 24 months Mixed color: milk white Gel time: 5-7mins

Multi Functional Fiber adhesives

It performs well in sizing high-setting fabirc and can easily be removed used in dyed yarns with little pollution.

Multi Purpose Spray Adhesive

I-Like Multi Purpose Spray Adhesive /Spray Glue/ Taxtile Spray Glue/ of strong adhesion, large spraying area, and uniform spray
I-Like Multi Purpose Spray Adhesive /Spray Glue/ Taxtile Spray Glue/ of strong adhesion, large spraying area, and uniform spray
I-Like Multi Purpose Spray Adhesive is a sort of solvent acrylic rubber bond with features of strong adhesion, large spraying area, and uniform spray adhesive Its economical, easy handling and of wide applications. It can be used for cloth, paper, board, plastic, metallic foil, soft wood and sponge.



Item No.:
ID-129
Can Size
65mm x 240mm H
Package
650ml x 12pcs/ctn
Carton Size
275x205x290 mm
20ft Container Loading
1845 cartons



It can be used for cloth, paper, board, plastic, metallic foil, soft wood and sponge.

Multi Purpose Spray Adhesive

Multi functional repair quick binder

Multi functional repair quick binder
1.easy to use, can mix the glue with hand directly
2.no dipping and flowing.
puttyMulti functional repair quick binder
application:
Cohere ,repair, install and fasten, make sample for many materials
Multi functional repair quick binder
features:
easy to use, can mix the glue with hand directly
no dipping and flowing.
can be processed and have no stretch after consolidation.
Multi functional repair quick binder
usage:
1 before use, clean rust or oil of the repair part
2. take out of the needed quantity glue stick,And mix inner part and outside part together.
3.Tps:you can also mix with pigment so the adhesive color will be the same with the repair material.
4.Compacting the glue in the repair part, and trying to extrude it in the cave or hole.
5.Under damp or dripping occasion. it is needed to compact for a while until the adhesive begins to solid

Parameter
Max temperature: 121°C/149°C
Hardness after 24 hours: 65-75D Shore
Tensile strength:5.5-6.9MPA
Chemical resistance: Oil, alcohol, ketone, hybrocarbon,
Saline solution, weak acid, weak base
Reduction rate: below 1%
Electric resistance:30000 MΩ
Insulation strength: 11.8 kV/mm
Non-volatile content: 100%
Storage period :12months(allowing 2-3year)

Multi functional repair quick putty stick

Multi functional repair quick putty stick
1.easy to use, can mix the glue with hand directly
2.no dipping and flowing.
puttyMulti functional repair quick putty stick application:
Cohere ,repair, install and fasten, make sample for many materials
Multi functional repair quick putty stick features:
easy to use, can mix the glue with hand directly
no dipping and flowing.
can be processed and have no stretch after consolidation.
Multi functional repair quick putty stick usage:
1 before use, clean rust or oil of the repair part
2. take out of the needed quantity glue stick,And mix inner part and outside part together.
3.Tps:you can also mix with pigment so the adhesive color will be the same with the repair material.
4.Compacting the glue in the repair part, and trying to extrude it in the cave or hole.
5.Under damp or dripping occasion. it is needed to compact for a while until the adhesive begins to solid

Parameter
Max temperature: 121°C/149°C
Hardness after 24 hours: 65-75D Shore
Tensile strength:5.5-6.9MPA
Chemical resistance: Oil, alcohol, ketone, hybrocarbon,
Saline solution, weak acid, weak base
Reduction rate: below 1%
Electric resistance:30000 MΩ
Insulation strength: 11.8 kV/mm
Non-volatile content: 100%
Storage period :12months(allowing 2-3year)

Multi-Purpose Silicone Sealant OLV368

1, Multi-Purpose Silicone Sealant for general purpose glazing
2, one part, acetoxy
3, excellent weatherability, waterproof
Description:
OLV368 Multi-Purpose Silicone Sealant is one-component, acetoxy cure, high quality silicone sealant designed for general purpose glazing and waterproofing application. It has high tensile strength and good elasticity, excellent weatherability, waterproof and good adhesion to most construction materials.

Main purposes:
1. For windows glazing, door frames, display cupboards,all kinds of indoors and outdoors glass engineering;
2. For sealing glass, aluminum alloy and ceramic;
3. For other general waterproof and sealing purpose.

Characteristics:
1. One-component, acetic-cured, RTV, high tensile strength and good elasticity;
2. Easy to use, fast curing, durable, and excellent weatherability;
3. Good adhesion to most building materials;
4. Colors include clear, white, grey, bronze, and black, or other colors as per customers requirements.

Application:
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.

Limitations:
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Cant be used if the temperature is below 4°C or above 50°C on the surface of the material.

Shelf life: 12 months if keep sealing, and stored below 27
0
C in cool, dry place after the date of production.
Volume: 300ml

Technology data:
The following data are only for reference purpose, not intended for use in preparing specification.

OLV368 Multi-Purpose Silicone Sealant
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±2
0
C:
Density (g/cm
3
)
±0.1
0.96
GB/T 13477
Tack-Free Time (min)
≤180
8
GB/T 13477
Extrusion (ml/min)
≥80
1249
GB/T 13477
Tensile Modulus (Mpa)
23
0
C
0.4
0.1-0.4
GB/T 13477
20
0
C
or 0.6
0.1-0.6
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
≤3
0
GB/T 13477
Curing Speed (mm/d)
2
3
/
As Cured -After 21 days at 50±5% RH and temperature 23±2
0
C:
Hardness (Shore A)
20~60
25
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.28
GB/T 13477
Elongation of Rupture (%)
/
120.3
GB/T 13477
Movement Capability (%)
12.5
12.5
GB/T 13477
Storage
12 Months

Multi-purpose Acetic Silicone Sealant (DLB-168)

DLB-168 is a 100% RTV General-purpose acetic silicone sealant. It is one part, Middle modulus, acid curing
DLB-168 is a 100% RTV General-purpose acetic silicone sealant. It is one part, Middle modulus, acid curing with good adhesion to most building materials.

Features:
One component, acid cure 100% RTV Silicone Sealant;
No corrosion to, coated glass, plastic, wood etc;
Good weatherproof ability and water proof;
Good performance at high and low temperature, -30
o
C 120
o
C;
Special designed for installation of glass panel for windows and doors frame.
Color: Transparent

Application:
Special designed for installation of glass panel for windows and doors frame.
Home decoration and DIY use;
Adhesion and sealing for other construction and industrial use.

Packing:
Plastic cartridge: 300ml/piece 24 pc/CTN

Technical data:
Item
Test Method
Result
Droop(mm)
GB/T13477
<2
Extrudability (ml/min)
GB/T13477
≥80
Skin time(h)
GB/T13477
≤30
Cure time(23±2, 50±5% Humidity)(d)
14-21
21 days after cure under 23±2 and 50±5% humidity
Elasticity recovery
JC/T 485
≥40
Grade
JC/T485
3

Restriction
Do not use for structural use.
Do not use on surface with grease, plasticizer or other solvent;
Do not use on frosty or damp surface, or places buried underground or underwater;
Do not use on paint, PVDF coating, in case seal failure caused by crack or peel off of the paint layer;
Do not use on the surface which may be of direct contact of food or places easy to be worn and torn;
Do not use in places which may of contact with hollow glass adhesive layer and porosity surface like concrete, cement, and porous stones;
Do not use when it is lower than 4 higher than 40.

Safety rules:
Keep our reach of children. Avoid contact with food and cosmetics;
Apply in drafty places; Inhale of vapor released from uncured sealant or curing is harmful to health;
Do not contact the uncured sealant with skin for long time;
In case of contact with eyes, rinse with plenty of water and appeal to doctor immediately.

Storage and transportation:
9 months shelf life if stored separately in cool and dry places, Temperature below 27; Non-dangerous goods, available for various transportations.

Multi-purpose glue

Multi-purpose glue is your best choise of its excellent quality and reasonable price.
Multi-purpose glue,
this product has an exceptionally strong adhesion, fast and easy to use, active ingredients at high concentrations, viscosity, spray covering an area of large, cohesive large area, saturated power is low, saving viscose. fine particles and uniform glue, paste, thin material does not wrinkle, and without corrosion penetration at the end of raw materials, save viscose, with 5 minutes or more lead time for bonding, enhance job flexibility, and improve working efficiency, non-corrosive, non-CFC-containing environmental protection and so on. the use of wide range, suitable for factories, hotels, hospitals, corporations,, and family use.

Multi-purpose pu sealant for windshield (TY-1000)

PU sealant
Material:polyurethane
Used for: auto windshield and body
Passed: SGS ISO
PKS:CARTON
Multi-purpose pu sealant for windshield (TY-1000)
TY-1000 PU sealant is mainly applied for the replacement repairment, production overhaul and a small quantity production of the windscreen of the automobile.
TY-1000A PU sealant is mainly applied for the binding of the windscreen and side window glass of the automobile, and the sealing of the welding joint of the refrigeration compartment and the glass curtain wall etc.; the joint filling of the side window glass of the passenger coach.
Technical Parameters

Item
TY-1000
TY-1000A
Appearance
Black Cream
Black Cream
Surface Dry Timemin
20-60
20-60
Solidifying Ratemm/24h
≥2.0
≥2.0
Densityg/cm
3
1.2±0.05
1.2±0.05
Viscosityg/min
70-100
40-60
Solid Content%
95
95
HardnessHA
≥30
≥45
Breaking StrengthMpa
≥2.0
≥4.5
Breaking Elongation%
≥400
≥400
Shearing StrengthMpa
≥1.5
≥2.5
Tearing StrengthMpa
≥7.0
≥8.0

3 Good thixotropy Epoxy Resin Injective glue

1.Bicomponent modified epoxy resin injection anchor adhesive
2.Not contain styrene, non-toxic
3.Good thixotropy
4.Convenie
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.

2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
.
Performance indexes

item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11

≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)

10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)

14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8

depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1

Multi-purpose windshield polyurethane air duct sealant

1Single component air duct sealant
2Flexibility air duct sealant
3Excellent bonding and sealing performanc
Features:
1.The polyurethane sealant has
flexibility and durability sealing performance
with a variety of material such as metal, wood, glass, polyurethane, epoxy resin and polyurethane materials, paint material surface
2.The single component sealant,
the thixotropy are extremely good
, the construction are convenient. Fast curing speed air duct sealant
3. Outstanding
waterproofing and anti-weathering
performance
4.
Paintable and polishable air duct sealant
5.
No sagging phenomena
on vertical application areas
6. Good extrudability air duct sealant
Usage:
1.
Side glass sealing
with body of buses, passenger car, ship ect
2.
body skin, Lvkou Ban sealing
3. bonding and sealing of
car interior and exterior decorations
4.
car body welding line
sealing,
modified vehicle
carriage sealing,
container
sealing

Involves the profession:
Automotive, rail vehicle, ships, astronautics, mechanical project vehicles, horse-drawn vehicles, containers, etc
Data Table:

Number
PU812
Appearance
Black, Paste
White, Gray, Paste
Density(g/cm³)
1.25±0.05
1.35±0.05
Sagging properties(mm)
0
0
Touch try time(min)
10~30
10~30
Curing speed(mm/d)
3~5
3~5
volatility(%)
≤3
≤3
Hardness( A °)
55±5
50±5
Tensile strength(MPa)
≥4.0
≥1.8
Elongation at break(%)
≥400
≥350
extrudability(ml/min)
≥80
≥80
Application temperature(°C)
+5~+35
+5~+35

Equipment for operation
Tubing: Manual or pneumatic piston coating machine gun

Packaging:
Aluminum Tub package:310ml, 20pieces per carton
Sausage package: 400/600ml, 20pieces per box

New Package

Muti-purpose High Grade Polyurethane Sealant

1. No saging, no pollution
2. Resistant to water and weather
3. Resistant high & low temperature
4. No need primer


Testing Items
Performance
Appearance
Black, homogeneous paste
Density (g/cm³)
1.35±0.05
Sagging properties(mm)
0
Shore A hardness(A°)
63±3
Tensile strength( Mpa)
≥6±0.5
Elongation at break (%)
≥400
Volatile content (%)
≤4
Tensile-shear strength(MPa)
≥3.5
Open time (min)
≤8
Touch Dry time (min)
10~30
Curing speed(mm/d)
3-5
Extrudability (ml/min)
≥80
Pollution
Non
Application temperature (ºC)
+5~+35
Shelf life(month)

9















§
DESCRIPTION:

Kater 661 is one component high quality multi-purpose polyurethane sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, Kater 661 is manufactured in accordance with the ISO/TS 16949:2002.

§
USES

Suitable for bus, oversize windshield and side glass installing.

§
ADVANTAGES:
* One-component formulation, excellent smooth appearance.
* Modest Hardness and high tensile strength after curing .-
* High viscosity, no falling for heavy glass initial bonding.
* Flexible, durable and excellent extrudability.
* Need no primer to glass
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing and adhesion performance, excellent water and aging resistance.

§
PACKAGING:
* 310ml cartridge, 20 pcs/carton
* 600ml/400ml sausage, 20 pcs/carton

§
ClEANING:

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

N-BUTYL ACETATE

N-BUTYL ACETATE
Purity: 99.9% min
quick delivery!
N-Butyl Acetate
CAS NO.: 105-46-4
EINECS No.:
Place of Origin: China (Mainland)
Grade Standard: Super Class, First Class, Second Class
Purity:99.9%
Appearance: colorless, flammable, with fruit flavor liquid
Application: 1.used as solvent in coating industry.
2.used as solvent in printing ink,adhesive agent.
3.used as the reaction intermediate in the production of resin.
4.used as a cleaning agent.
5.used as a component in diluents
Item
Index
Mass fraction of butyl acetate % min
99
Mass fraction of water % max
0.1
Mass fraction of acid %(count by acetic acide) max
0.01
Mass fraction of evaporation residue % max
0.001
Chroma/Hazen Unit(Pt-Co scale) max
10
Density, g/cm3
0.866-0.872
odor
No buried odor,no residual

N-beta-(aminoethyl)-gamma-aminopropyl-methyldimethoxysilane (CAS No.:3069-29-2 )

A-2120(GE-Silquest)
Z-6023(Dowcorning)
KBM-602(Shin-Etsu)
GF95(Wacker)
Silane coupling Agent KH-602

Chemical Structural Formula
: NH
2
(CH
2
)
2
NH(CH
2
)
3
SiCH
3
(OCH
3
)
2

Introduction:

KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. KH-602 is a diamino-functional silane capable of providing good adhesion and superior elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces-reinforcements, fillers and substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment.
Typical Physical Properties:
CAS No.: 3069-29-2
Molecular Weight: 206.4
Boiling Point<760mmHg>: 265
Viscosity<25>: 4.6mm2/s
Flash Point: 93
Ignition Temperature: 290
Density<25/25>: 0.970-0.980
Refractive Index<25>: 1.445
+
0.0005
Min. Purity: 97.0%

Solubility:

KH-602 is easily soluble in water with spontaneous hydrolysis occurring. Caution: Due to solution enthalpies mixing water is exothermic. Always stir KH-602 into water. With alcohols miscibility is, in general, possible with self-catalyzed exchange of the alkoxy-groups. In aliphatic and aromatic hydrocarbons and (moisture-free) ethers or esters KH-602 is easily soluble at differing levels. With ketones and various halogenated compounds a slow reaction can occur. Towards acids, epoxides or isocyanates. KH-602 shows typical amine function. Some nonferrous metals can discolor upon contact.

Applications:
Provides superior elongation, flexibility and spreading at the interface as a coupling agent.
Improves adhesion between glass, mineral and metal surfaces and amino-reactive resins.
Improves adhesion, while maintaining good shelf stability as an additive in waterborne systems.

N76 Structural Silicone Sealant

N76 Structural Silicone Sealant
Curtain Wall
Weather Sealing
Structural Glazing
Product Description
N76 is a one part neutral curing silicone sealant designed specifically for structural glazing applications for glass and metal in factory or field situations. It has excellent weather ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.
Typical use:
1. For structural glazing and protective glazing applications.
2. Facades & Claddings, EIFS, curtain walls and building construction applications.
3. Surface like glass, aluminum, ceramics, steel, tiles, concrete, precast panel and other common building materials.
Specification:
ISO 11600
ASTMC920
GB/T 16776
Application
Apply to clean, dry and grease-free surfaces. Apply sealant into the base of the joint so that it can completely fill the joint. Tool the surface of the joint immediately after sealant application to provide a smooth even finish and ensure the sealant wets both sides of the joint. Remove the masking tape after tooling. Do not disturb the joint for 48 hours. Avoid contact with various cleaning agents for solvents (e.g. bleach) whilst sealant is curing.
Limitation
Do not use when substrate temperature is above 50°C or surfaces that are wet, oily, greasy, dusty or dirty.
Do not use for sub-graded application, confined space or surfaces that require post finishes or paintings.
Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
Do not use in surfaces that direct contact with food.
Shelf Life
12 months from manufacture date when store in cool dry locations below 25°C, keep away from heat source and direct sunlight during storage.
Colours
Black. Contact us for special colours.
Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.

NEUTRAL RTV GASTKET MAKER

HOPSON High Temperature Silicone Gasket Maker is non-slumping, one component and acidic-curing rubber.
Description:

HOPSON High Temperature RTV silicone gasket maker a high strength neutral curing silicone sealant giving excellent adhesion to metallic and non-metallic surfaces as a gasket.

HOPSON New improved formula neutral silicone sealant Gasket maker
In accordance with market demand, our technicians have developed the 459x series of neutral silicone sealant after years of research. Neutral silicone sealants in current market are packaged in aluminum tubes and rear air can not be totally addition to the net. As a result, the tails are easy to dry agglomeration. And the New neutral silicone sealant is succeeded in overcoming this shortcoming.

Features:
1, Simply screw the lid tight, the tails of this series of products will not easy to dry agglomeration, even if after being used.
2, Skin time (21°C): 3-10 minutes.
3. Strength: As same as the acid or oxime cure neutral sealants in the same grade. Products in Grade AA or A will almost not be pulled apart by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the same conditions, shelf-life will be longer than that of the silicone sealant in the current market. At present, the shelf-life we committed is 18 months.
5, Temperature resistance: As same as other silicone sealant, such as GF-4596 in Grade AA is up to 300°C.
Red: GF-4596
Grey: GF-4599
Sealing, bonding and sealant Laboratory Report:
Temperature: 21°C Humidity: 54%
Time(3days)

HP-4596AA
Skin time
(min)
Density
g/centimeter²
Tensile
Strength
(MPa)
Elongation
(%)
100%
Modulus
(MPa)
Hardness
(Shore A)
3”
1.2441
2.19
627.875
0.59
29

HP-4596AAB
Skin time
(min)
Density
g/centimeter²
Tensile
Strength
(MPa)
Elongation
(%)
100%
Modulus
(MPa)
Hardness
(Shore A)
4”
1.3207
2.80
515.609
0.84
28

HP-4599B
Skin time
(min)
Density
g/centimeter²
Tensile
Strength
(MPa)
Elongation
(%)
100%
Modulus
(MPa)
Hardness
(Shore A)
5”
1.3641
1.87
478.244
0.72
31

Packing:
32g/cps, 12pcs/box,144pcs/carton. 6/7.5KGS. 36.7*21*41cm.
85g/pcs,12pcs/box,144pcs/carton.. 17/18KGS. 46*39.5*45cm.

NEW ES-2011 hot sell FUKKOL THERMAL GREASE FOR CPU HEAT SINK

FUKKOL THERMAL GREASE FOR CPU HEAT SINK 1.Wisthstand high temperature from -40 to 250 centigrade.
2.Good thermal conductivity.




FUKKOL
THERMAL

GREASE
FOR
CPU

HEAT

SINK
Name:
ES-
Thermal silica
Color
Any available
Certificate:
SGS
Material:
silicone
Logo:
ES-silicone
payment
TT, Western Union
MOQ:
5000pcs
Sample:
Available
Specification:
Thermal silica(Thermal conductivity, heat, insulation)
Characteristics
1,Has excellent thermal conductivity, thermal, electrical, insulation, damp proof, shock-proof, antiaging properties.
2,Can be -50 ~ 300 °C temperature range of long-term work, the temperature changes in a very small change in its consistency, the performance of high-temperature non-melting, non-hardening at low temperature does not freeze.
3,Of iron, steel, aluminum and its alloys and a variety of synthetic materials are free from corrosion effect; of plastic and rubber non-swelling.
4,Non-toxic, tasteless.
Uses

Mainly used in electronic components of the heat transfer medium, can enhance their work efficiency. Such as: high-power transistors (especially the plastic tube), SCR components, thermostat contacts between the diode and the substrate (aluminum, copper) contacts the heat transfer medium gap Department, rectifiers, radiator and electrical the thermal conductivity of insulating materials.
The use of
Widely used in thermal conductivity, thermal, electrical, insulation, mold release, anti-fouling, waterproof, coated, shock-proof and equipment analysis.
Applications such as
1, Computer CPU COOLER, graphics card chip cooling;
2, Inverter, switching power supply;
3, TV, monitors, notebook computers;
4, Power amplifier circuit;
5, Refrigerators, air conditioners, water dispensers, hot and cold boxes and other automotive refrigeration equipment;
6, Electric irons, coffee pots, induction cooker, electric kettle, electric ovens and other small household electrical appliances;
7,Medical electronic equipment and so on.
Usage

1, Rub the surface to be coated (wash) to clean without impurities; available scraper, brush, glass or syringes direct coating or filling.
2, In the use of process, sometimes a small amount of air entrainment, can be static, pressurized or vacuum bubble row.
Note:

1, Use the appropriate choice of brands, such as user self-dilution, easy to produce sub-oil phenomenon, the impact of thermal effects.
2, This product storage time since the date of production for two years, over the storage period can still be used for passing inspection.
3, The use of operation clothes or accidentally spilled the hands can be used to clean cloth or wipe to clean water by using the machine.
Packaging, security, transport:

1000g / cans, plastic bottles; this product for non-dangerous goods, according to non-dangerous goods storage (cold dark storage) and transportation.
products warranty
ISO9001:2000 / ISO14001:2004 / ROCH / UL

NEW!!!!! Best wood glue

1.General purpose, low to medium viscosity.
2.Bonds in seconds, no clamping, no mess
Company introduction:
BOYA CHEMICAL INTERNATIONAL COMPANY LIMTED is majoring in manufacturing and exporting Cyanoacrylate adhesive(502 super glue,nail glue and eyelash glue).We specialize in this field for 8 years.It is armed with advanced imported automatic equipment,
adopts advanced production technology, and established strict production and management systems. Our mission is "top quality, innovative product ,client primary and less waster."
Characteristics:
Chemical Type
Ethyl cyanoacrylate
Appearance(uncured)
Clear liquid
Components
One component
Viscosity
2-3cps
Gap Fill
0.04mm
Setting Velocity
10sec
Shelf life
12month
Tensile-Shear Strength
150-200kgf/cm2

Directions for use
1
For best performance bond surfaces should be clean and free of grease.
2 This product performs best in this bond gaps (0.04mm).
3 Excess adhesive can be dissolved with cleanup solvents, nitromethane or acetone.
Storage
Store product in the unopened container in a dry location.
Optimal Storage:

2~ 8°C
note
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

NEW!!!!! Crazy glue

1.General purpose, low to medium viscosity.
2.Bonds in seconds, no clamping, no mess
Company introduction:
BOYA CHEMICAL INTERNATIONAL COMPANY LIMTED is majoring in manufacturing and exporting Cyanoacrylate adhesive(502 super glue,nail glue and eyelash glue).We specialize in this field for 8 years.It is armed with advanced imported automatic equipment,
adopts advanced production technology, and established strict production and management systems. Our mission is "top quality, innovative product ,client primary and less waster."
Characteristics:
Chemical Type
Ethyl cyanoacrylate
Appearance(uncured)
Clear liquid
Components
One component
Viscosity
2-3cps
Gap Fill
0.04mm
Setting Velocity
10sec
Shelf life
12month
Tensile-Shear Strength
150-200kgf/cm2

Directions for use
1
For best performance bond surfaces should be clean and free of grease.
2 This product performs best in this bond gaps (0.04mm).
3 Excess adhesive can be dissolved with cleanup solvents, nitromethane or acetone.
Storage
Store product in the unopened container in a dry location.
Optimal Storage:

2~ 8°C
note
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

NEW!!!!! Srongest glue

1.General purpose, low to medium viscosity.
2.Bonds in seconds, no clamping, no mess
Company introduction:
BOYA CHEMICAL INTERNATIONAL COMPANY LIMTED is majoring in manufacturing and exporting Cyanoacrylate adhesive(502 super glue,nail glue and eyelash glue).We specialize in this field for 8 years.It is armed with advanced imported automatic equipment,
adopts advanced production technology, and established strict production and management systems. Our mission is "top quality, innovative product ,client primary and less waster."
Characteristics:
Chemical Type
Ethyl cyanoacrylate
Appearance(uncured)
Clear liquid
Components
One component
Viscosity
2-3cps
Gap Fill
0.04mm
Setting Velocity
10sec
Shelf life
12month
Tensile-Shear Strength
150-200kgf/cm2

Directions for use
1
For best performance bond surfaces should be clean and free of grease.
2 This product performs best in this bond gaps (0.04mm).
3 Excess adhesive can be dissolved with cleanup solvents, nitromethane or acetone.
Storage
Store product in the unopened container in a dry location.
Optimal Storage:

2~ 8°C
note
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

3 Not contain styrene and non-toxic Epoxy Resin ceramic adhesive

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)

NEW!!!!! Super glue

1.General purpose, low to medium viscosity.
2.Bonds in seconds, no clamping, no mess
Company introduction:
BOYA CHEMICAL INTERNATIONAL COMPANY LIMTED is majoring in manufacturing and exporting Cyanoacrylate adhesive(502 super glue,nail glue and eyelash glue).We specialize in this field for 8 years.It is armed with advanced imported automatic equipment,
adopts advanced production technology, and established strict production and management systems. Our mission is "top quality, innovative product ,client primary and less waster."
Characteristics:
Chemical Type
Ethyl cyanoacrylate
Appearance(uncured)
Clear liquid
Components
One component
Viscosity
2-3cps
Gap Fill
0.04mm
Setting Velocity
10sec
Shelf life
12month
Tensile-Shear Strength
150-200kgf/cm2

Directions for use
1
For best performance bond surfaces should be clean and free of grease.
2 This product performs best in this bond gaps (0.04mm).
3 Excess adhesive can be dissolved with cleanup solvents, nitromethane or acetone.
Storage
Store product in the unopened container in a dry location.
Optimal Storage:

2~ 8°C
note
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

NEWEST HIGH-TEMP RTV gasket maker-638 red

NEWEST HIGH-TEMP RTV gasket maker-638
1. Fast curing and high quality
2. available in many colors
3.resists auto and shop flu

NEWEST HIGH-TEMP RTV gasket maker-638


FEATURE
1.Defor SEC-638 silicone gasket maker is a neutral cure, sensor-safe,low-odor.non-corrosive compound
2.RTV SEC-638 meets the performance specs of gaskets and retain high flexibility and oil resistance
3.Temperature range of -75 0F to 536 oF intermittent and resists auto and shop fluids and vibration
4.Available in 35ml and 85ml tubes and Available color: black grey red
5.Suggested application include:valve covers; oil pans;Intake manifold end seals;
Timing covers;Transmission pans

sugest application include:
-valve covers
-oil pans
-intake manifold end seals
-timing covers
-transmission pans

RTV Silicone Gasket Maker can be used almost anywhere a cut gasket of paper, cork, etc.,
was used or to replace previously applied formed in-place gaskets. It is used as a gasket maker in areas with large gaps, such as valve covers,
transmission pans, cover plates, hose connections, timing case covers, oil pans, oil pumps,
thermostat housings, flanges, cam shaft rear covers, pushrod covers, and etc.

SPECIFICATION
PACKING:85G/TUBE,144/PCS,25*25*26CM
DELIVERY TIME: 20- 25 DAYS

CERTIFICATIONS:

NIC-C5 ,C6 Granite,Marble,Stone Tile super adhesive

Super Adhesive , formulated to produce an extra high strength for fixing granite,marble,large ceramic tiles and stones
Super Adhesive Features:
1.Can be used on concrete,cement render,plaster board and fiber cement boards
2.Can be used directly onto the old tiles
3.Durable for thermal expansion and movement

TECHNICAL DATA:
Adjust time:>5min
Open time:>=10min
Surface drying time:Approx. 2h
Shrinkage:0.50%
Appearance:White or grey powder
Normal Shear Strength:>=0.70MPa
Water Resistance Shear Strength:>=0.70MPa
Heat treatment Resistance Shear Strength::>=0.70MPa
Freezing-thawing Resistance Shear Strength::>=0.70MPa

Dosage:
1.Using 6mm*6mm notched trowel,Approx.2.8-3.0kg/m2
2.Using 10mm*10mm notched trowel,Approx.4-5kg/m2
Notched trowels are chosen according to site and surface

NIC-C5 Marble adhesive

Marble Adhesive specially formulated to produce an extra high strength for fixing granite,marble,large ceramic tiles and stones
Marble Adhesive Features:
1.Can be used on concrete,cement render,plaster board and fiber cement boards
2.Can be used directly onto the old tiles
3.Durable for thermal expansion and movement

TECHNICAL DATA:
Adjust time:>5min
Open time:>=10min
Surface drying time:Approx. 2h
Shrinkage:0.50%
Appearance:White or grey powder
Normal Shear Strength:>=0.70MPa
Water Resistance Shear Strength:>=0.70MPa
Heat treatment Resistance Shear Strength::>=0.70MPa
Freezing-thawing Resistance Shear Strength::>=0.70MPa

Dosage:
1.Using 6mm*6mm notched trowel,Approx.2.8-3.0kg/m2
2.Using 10mm*10mm notched trowel,Approx.4-5kg/m2
Notched trowels are chosen according to site and surface

NMN insulation paper

NMN insulation paper:Insulation class F (155C),Excellent Heat Resistance,dielectric property and Mechanical Strength.
ISO9001
NMN insulation paper consists of PET film, covered on both sides with calandered Nomex paper .NMN is a combined flexible material of thermal rating class F (155) with excellent mechanical properties like high tensile strength and high edge tear resistance combined with high electrical strength.
NMN has a smooth surface which allows a trouble free manufacture of low voltage motors where coil shooting machines are used.
NMN is mainly used as a slot liner, slot closure and phase insulation in the production of low voltage motors. Besides this NMN is used as interlayer insulation in transformers and other electrical machines and appliances.
NO
Properties
Unit
Values
1
Nominal Thickness
mm
0.15
0.18
0.2
0.23
0.25
0.3
0.35
2
Thickness Tolerance
mm
±0.02
±0.03
±0.04
3
Nominal Grammage
g/
180±25
210±30
240±30
260±35
300±40
350±50
430±50
4
Tensile Strength
MD
No Bending
N/10
≥150
≥160
≥180
≥200
≥220
≥270
≥320
After Bending
mm
≥80
≥110
≥130
≥150
≥180
≥200
≥260
TD
No Bending

≥90
≥110
≥130
≥150
≥180
≥200
≥250
After Bending

≥70
≥90
≥110
≥130
≥150
≥170
≥200
5
Elongation
TD
%
≥10
≥12
MD

≥15
≥18
6
Breakdowm Voltage
TD
KV
≥7
≥10
≥11
≥12
≥13
≥15
≥20
MD

≥6
≥8
≥9
≥10
≥12
≥13
≥16
7
Bond Strength at 25C

No delamination
8
Bond Strength at 155C

No delamination,no blister,no adhesive flow
9
Temperature

≥180

NP Neutral Silicone Adhesive

NP neutral Silicone Adhesive is used as weather sealing glass, aluminum, marble, and so on.
1.Characteristics:
NP neutral
Silicone Adhesive
belongs to
RTV
-1, expediently application between 4~40°C to alcoxy curing system, expediently application between 5~50°C to oxime curing system.
Neutral curing, non-corrosive to glass, coated glass, concrete, marble, metal (not including oxime curing system) and most kinds of plastic, etc;
Quickly speed of curing, excellent
adhesion
, middle , excellent movement capability;
Excellent resistance to weather, the service life is over 50 years in the condition of general weather;
Excellent resistance to low and high temperature change. Little changes of performance at -40~150°C;
Excellent adhesive to most common building material, Special material will have better adhesive with priming;
Good compatibility with other neutral
silicone adesive
;
Belong to non-dissolvent product, low vulcanization shrinkage and green environmental protection product.

2.Purpose:
For weather sealing in glass curtain wall joints;
For weather sealing in aluminum , enamel curtain wall joints;
For sealing in marble (granite),concrete, tile, metal panel materials ect.;
Many other building & Industrial uses.

3.Typical Technology Data:


Performance
Standard
JC/T 882-2001
Measured Value

Testing method
Alcoxy
Oxime
Slumpability (mm)
≤3
0
0

GB/T 13477
Extrusion (ml/min)
≥80
392
336
Tack-Free Time (min)
≤180
30
30
Hardness (HsA)
/
50
48
GB/T 531
Loss of Heating %
≤10
3.3
403
ASTMC 792
Elasticity recovery %
≥80
94.0
90.0

GB/T 13477
Tensile strength in adhesion (Mpa)
≥0.4
0.91
0.83
Permanent set adhesion
Non destroyed
Non destroyed
Non destroyed
Movement Capability %
±20
±20
±20
ASTMC 719
Elongation at ultimate strength %
/
250
260
GB/T 13477
Stability
Store for 12 months at 20~30°C in cool, dry place after date of manufacture.

4.Application Standard:
Standard JC/T 882-2001 Curtain wall sealing
silicone sealant

5.Restriction of Usage
Cant be used as structural
adhesive
;
Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the
adhesive
;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place
Cannot be used the product of alcoxy , if the temperature is below 4°C or above 40°C on the surface of the materials; Cannot be used the product of oxime , if the temperature is below 5°C or above 50°C on the surface of the materials.

6.Color and Package:
Color: Black, Gray, White or other colors on request to JH-388
Package: JH-388: 310ml Cartridge net 300ml,

7. Joint Design and Working Procedure:
Please refer to Section The Technology Instruction of Jianhua
Silicone sealant

8. Technical Service
Offer the integral technical data of the
adhesive

9. Maintenance:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC

Project photos

Nail Free Adhesive

Good adhesion on most materials
High strength, Gap filling, Quick Grab
Easy Application, Heat & Water Resistant
Description & Benefits
It is a ready to use solvent based gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adhesive to most common surfaces inside and outside the home as follow:
Wood to wood assembly; Metal joints to limber ; Lumber and treated
Bonds to wood, plastic, Brick, Bathroom fixtures, Plasterboard & Metals
Fixes skirting boards, wall panels, cladding & framework
Replaces nails & screws & drilling

Application/ Usage:
Before bonding, the surfaces must be clean dry, take free of water, wax, dust, oil
Along the bonded surface with point or elongated to get sizing
After bring the two surfaces together, please pull apart two surface. Allow adhesive to dry apart for 2-5 minutes before pressing finally into position
Within 24 hours to achieve the best bond effect, 2-3 days completely cured

Storage:
Stock the products in cool and dry conditions at the temperature of +5 and +35°C, away from all sources of ignition. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life.
Shelf life: 12months

Nail Free Adhesive

Nail Free Adhesive
Excellent adhesion with building material
Made in Taiwan
Nail Free Adhesive

Nail Glue

Nail Glue
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00%
Nail Glue
Product Description
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00% INCI
Hydroxypropyl methacrylate 10.00 INCI
Benzoyl Isopropanol 03.00 INCI
HEMA 01.00 INCI
Violet 2 (CI 60725) 01.00 INCI

Nail Glue

Nail Glue
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00%
Nail Glue
Product Description
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00% INCI
Hydroxypropyl methacrylate 10.00 INCI
Benzoyl Isopropanol 03.00 INCI
HEMA 01.00 INCI
Violet 2 (CI 60725) 01.00 INCI

3 Not contain styrene and non-toxic Epoxy Resin marble tile adhesive

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)

Nail tip glue

Nail tip glue
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00%
Nail tip glue
Product Description
INGREDIENT: PERCENTAGE: SOURCE:
Polyurethane Acrylate Oligomer 85.00% INCI
Hydroxypropyl methacrylate 10.00 INCI
Benzoyl Isopropanol 03.00 INCI
HEMA 01.00 INCI
Violet 2 (CI 60725) 01.00 INCI

Nails glue

Brand:henco
Product:Nails glue
it suits for wood,plastics,ceramic,rubber...
our production can made under your trade mark.
Super Glue

The Name Of Product
Nails glue
Model Number
HN-3A
Application
suits for metal,rubber,ceramics,plastic,wood.
Appearance
colourless transparent liquid
Specification
3gram/bottle,1 bottle/ blister card
packing
288card/carton
Measurement(cm)
50*38*36
G.W/N.W
9 KG/8 KG
Shelf Life
12 months

Super glue is a single-component cyanoacrylate monomer in the liquid state, capable of extremely rapid polymerization between adherent surfaces, result-ing in extremely strong and structural bonds at room temperature.
This instant adhesive will, with only normal surface preparation, bond all materi-als commonly used in the engineering industry, except polyethylene. Polypropylene, teflon, and very porous surfaces, which require special treatment.

Application
:
Be sure both surfaces are clean and dry. Apply with extreme care. Never spread with fingers. Apply one drop for each 3 cm area. Apply to only one of the surface, Quickly place two surfaces together with slight finger pressure.
Bond is completed in seconds, or depending on material in about one minute, leave for 24 hours for strongest bond.
Clean away all excess adhesive from container with tis-sue paper. Keep out of reach of children, in cool dry place.

Warning
: Keep out of reach of children:
Adhesive will stick to skin very quickly, when using, be sure it dose not come into contact with fingers, do not try to pull it off. Soak fingers in warm warter and work off Nail polish remover may also be used. If adhesive get in eye, wash eye with quantities of plain water, do not try to remove by rubbing or applying solvents, in case of pain or discomfort, consult a doctor.

Bond for home uses
:
For mending dishes and household articles, tables, chairs, bureaus and other articles of furniture, fishing tackle and other sports equipment, or for use on metal, leather or paper.

Nano-meter odorless spray adhesive

Nano-meter odorless spray adhesive ,high solids ,non smell,nontoxic,
Nano-meter odorless spray adhesive N38#

Main ingredients: SBS rubber,high quality resin,tackifier resin,solvent oil,
Viscosity(MPA'S):100+/-30
Solid content(%) :30+/-5
Heat resistant :60-65ºC
Color :yellowish
State : liquid
Features :high solids ,powerful,aging resistant,non smell ,nontoxic,
For materials :sponge ,cloth,leather,wooden board ,paper,plastic
Applicant area: cloth screen ,mattress and pillows ,sofa and swivel chairs and suitcase and bags
Operation notes :uniform sprayed on double sides ,air 1-3 minutes before bonding after sprayed on a large square area , Incorrect pressure is necessary .

Neoprene Adhesive

Neoprene Adhesive is used for bonding Formica, PVC board, furniture, paint-free panel, aluminum-plastic panel, fireproof plate
Neoprene Adhesive(Contact Adhesive, Contact Cement) is widely used for bonding Formica, fiberboard, rigid PVC board, furniture, table tops, polyester plywood, plaster wood, paint-free panel, aluminum-plastic panel, fireproof panel, decorative panel etc.
It can be used by brush, roller coater, notched trowel, air spray (hot or cold), airless spray (hot or cold), curtain coater and so on.
Sample Name
Contact Cement
Base Figure
Test Items
Examine Definite Value
Appearance
Yellowish, yellow and brown thick liquid
Solid Content (%)
≥18
Viscosity(25,MPA.s)
1200-3000
PH value
6-8
Peel Strength(25, KN/M)
≥1.5
Tensile-Shear Strength(MPA)
≥1.3
Drying time
5-25minutes at 25
o
C
Shelf Life
18months
Endurable Temperature
50
o
CNegative-100
o
C

Neoprene Adhesive

Neoprene Adhesive
Contact Adhesive
Rubber Adhesive
Made in Taiwan
Neoprene Adhesive

Neoprene Adhesive

Contact Adhesive is used for bonding Formica, PVC board, furniture, paint-free panel, aluminum-plastic panel, fireproof plate
Application
Contact Adhesive(Contact cement, Neoprene Adhesive) is widely used for bonding Formica, fiberboard, rigid PVC board, furniture, table tops, polyester plywood, plaster wood, paint-free panel, aluminum-plastic panel, fireproof panel, decorative panel etc.

It can be used by brush, roller coater, notched trowel, air spray (hot or cold), airless spray (hot or cold), curtain coater and so on.

Technical Data
Sample Name
Contact Cement
Base Figure
Test Items
Examine Definite Value
Appearance
Yellowish, yellow and brown thick liquid
Solid Content (%)
≥18
Viscosity(25,MPA.s)
1200-3000
PH value
6-8
Peel Strength(25, KN/M)
≥1.5
Tensile-Shear Strength(MPA)
≥1.3
Drying time
5-25minutes at 25
o
C
Shelf Life
18months
Endurable Temperature
50
o
CNegative-100
o
C

Neoprene Adhesive

All Purpose Adhesive
1. Bonds and seals most surfaces
2. High strength and strong initial
3. Excellent adhesion, durability
It is widely uesed to be in home decoration and exterior architecture. Bonding common building
materials, as like fireproof-board, aluminum-plastic plate, man-made board, polyester plywood, floor, furniture, also sticking leather, rubber, carpet, wallpaper, plastics, wood, glass, etc.

Using Method:

1. Remove the oil, dirty from the surface and keep clear, dry.
2. Spreads evenly on surface of two joint material, after dries moderately, folds gathers with exerts pressure (for example spread 2~3 times for multi hole joint material)
3. The application adhesive could be achieved after drying for 48 hours at the room temperature of 25. The best adhesive performance is available after leaving aside for 6 days.

Packing:
250ml—24tins/carton 1L—12tins/carton 4L—4tins/carton

Neoprene Contact Ashesive

contact adhesive
neoprene-base
fast drying, strong adhesive
no corrosion
for all purpose use
contact adhesive
neoprene-base
fast drying, strong adhesive
no corrosion
for all purpose use
I-Like neoprene-base contact adhesive has the features of convenient for proceeding, fast drying, strong adhesive force, and no corrosion to the gluing surface.
It can be used by gun or brush.This product is designed for all purpose use, such as leather, metal ware, paper, plastic, rubber and wooden, particularly good for bonding plywood, floor, top plate, high-class wooden furniture etc.


1L/pc, 6pcs/ctn, 2880 cartons/20FCL


It can be used by gun or brush.This product is designed for all purpose use, such as leather, metal ware, paper, plastic, rubber and wooden, particularly good for bonding plywood, floor, top plate, high-class wooden furniture etc.


Neoprene Contact Adhesive

Neoprene Contact Cement 250ML

Contact cement
High initial viscosity
High strength
Waterproof and oil resistance
Long shelf life and security
Contact Adhesive
Recommended For:

Boding Daily building materials in exterior architecture, interior decoration, home furniture-made ad repairing, such as leather, wallpaper, carpet, rubber, metal, wood, plastics, glass, porcelain, also for fireproof-board, aluminum-board, man-made board, polyester plywood, bamboo board.

Technical Data:
Description
Appearance
Viscosity(25°C,mPa.s)
Solid Content(%)
Peeling Strengthen(25°C*48h,canvas-canvas N/2.5cm)
Popular Contact Adhesive
Amber thick liquid
1500-3500
25 + 2
≥70

Storage:
1.Store in original unopened containers between 8 to 35°C.
Reseal immediately once used.
2.Shelf Life:12months

Neoprene glue

Neoprene glue is neoprene type, for formica, leather, rubber, carpet and so on. It is all purpose usage.
Neoprene glue Is
Specially Used For Formica, Also Used To Bond Leather, Rubber, Wood, Glass, Metal, Carpet, Fabric And So On.

Using Method:
1. Clean The Joint Surface And Dry
2. Smear The Glue On Both Sides Of Joint Surface. Fold And Press After Proper Drying.
3. Dry For 48 Hours Could Reach Using Intensity, The Mas Intensity After 7 Days.
Applycation:
It Can Be Used By Brush, Roller Coater, Notched Trowel, Air Spray (Hot Or Cold), Airless Spray (Hot Or Cold), Curtain Coater And So On.

Sample Name
Contact Cement
Base Figure
Test Items
Examine Definite Value
Appearance
Yellowish, Yellow And Brown Thick Liquid
Solid Content (%)
≥18
Viscosity(25,Mpa.S)
1200-3000
Ph Value
6-8
Peel Strength(25, Kn/M)
≥1.5
Tensile-Shear Strength(Mpa)
≥1.3
Drying Time
5-25minutes At 25
o
c
Shelf Life
18months
Endurable Temperature
50
o
cnegative-100
o
c

1 Epoxy resin exterior tile adhesive

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)

3 SECONDS super glue/cyanoacrylate adhesive/for assembly, woodworking, construction material

super glue/cyanoacrylate adhesive/ insant glue
1.Ideal for porous surface
2.high viscosity
3.assembly/woodworking
3 seconds® super glue/ cyanoacrylate adhesivefor assembly, woodworking, construction material


Product Description:
1. Ideal for porous surface
2. high viscosity type
3. Application: assembly, woodworking, construction material
4. 20g


Super Glue (instant glue/cyanoacrylate adhesive)
Features of three seconds® super glue:
1. Low and high viscosity. (Water type, gel type, and paste type)
2. Fast and slow curing speed.
3. Available service for special demand customization.
4. Applicable for woods, leathers, plastics, porous material, etc.

3 SECONDS ® super glue Introduction
Cyanoacrylate Adhesive 3 SECONDS ® is a transparent, colorless, fast drying adhesive which bonds in seconds. It is designed for bonding of rubber, plastics, metals, ceramics, etc., as well as for assembling parts of woodworing, automobile, electronic, fishing pole, models, jewelry, picture frames, and precision instruments.

Characteristics
3 SECONDS ® can be applied to a wide variety of surfaces and substrates, except PE, teflon, silicon, and PP.
3 SECONDS ® can be applied alone without solvent or catalyst, won't affect the demension of materila treated.
3 SECONDS ® in normal temperature, no heating is required.
3 SECONDS ® requires only a small dose to reach desirous bonding strength.
3 SECONDS ® bonds in seconds and is easy to apply.

List of Tex Year Super Glue
Product Code
Property Description
Industry Category
TY-1BN
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-1N
(20g)
Low blooming, low viscosity type (2-3 cps)
Assembly,Woodworking / Construction Material
TY-2N
(20g)
General purpose, low viscosity type. Ideal for general assembly, repair, model and household DIY pupose
DIY/ Family
TY-2N
(20g)
Ideal for plastic surface, low viscosity type
Woodworking / Construction Material
TY-5AN
(20g)
Ideal for porous surface, high viscosity type
Assembly,Woodworking / Construction Material
TY-5N
(20g)
Ideal for porous surface, medium viscosity type
Woodworking / Construction Material
TY-7AN
(20g)
Ideal for porous surface, low/medium viscosity
DIY/ Family
TY-GN
(20g)
Gel type. Ideal for ceramics and rubber plastic
DIY/ Family

Neporene adhesive

Fast bonding speed, excellent and long lasting bonding power
Super first-bonding power, good penetration property, fast dry.




Packing: 0.7L, 1L, 2L, 3L, 4L, 12L, 15L, 18L and 200L
Dosage: 195-250g/m
2.
.

Application Tools: Brusher, Scroller, Shaver, Trowel, etc.
Storage Condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5 - 35 Celsius, and the relative humidity shall be <80%.
Shelf Life: 18 months

OEM service provided.
.
.

Neutral RTV Silicone Sealant

The products suited for intake and exhaust manifolds,headers,thermostat housings,ect.
GF-23AB Neutral Cure Sealant is designed for diverse OEM and
assembly applications. General uses include bonding and sealing,formed-inplace gasketing and maintenance applications.Specific uses include:• Substitute for mechanical fasteners on large and small appliances• Sealing refrigerator and freezer liners (however,not FDA-approved for food-contact applications)• Adhering plastic moldings to plastic substrates for trim applications, decals• Waterproofing electrical components• Sealing coaxial connectors• Protecting instrumentation assemblies
Part No.GF-23AB, GF-23ABX32
85 or 32ml/pc, 144 pcs/CTN
OUTER CARTON MEAS.
46X38.5X45cm
ONE 20'GP CAN CONTAIN 350 CTNS
Technical data sheet
Item Unit Value
Cure system Neutral Cure
Standard color clear
Application temperature
°C
+5 to +40

+41 to +104
Specific gravity g/ml 0.98-1.02
Extrusion g/min >300
Skin-over time (23
?

, 50% R.H.) min 20-120
Cure rate (23
?
, 50% R.H., 1day) mm 1-2
2mm thickness S2 dumb-bells (ASTM D412)
E-Modulus 100% MPa 0.30
Tensile strength MPa >0.80
Elongation at break % >300
Hardness (Shore A) 20~40

Neutral Silicone Sealant

I-LIKE Silicone Sealant
Neutral Silicone Sealant
single-component,
neutral curing, fast curing speed,
low modulus,
I-LIKE Silicone Sealant
Neutral Silicone Sealant
single-component,
neutral curing, fast curing speed,
low modulus,
I-Like Neutral Silicone Sealant has features of following:
1. Single-component, convenient to use at the temperature 5-40°C
2. Neutral curing, high modulus, no corrosion to the materials such as glass, coated glass, concrete, marble, metal, etc.
3. Excellent adhesion to most building materials, no need to use prime.
4. Excellent compatibility to other neutral silicone sealant.


Item No.:
ID-122
Can Size
48mm x 220mm H
Package
280ml x 24 pcs/ctn
Carton Size
310x210x240 mm
20ft Container Loading
2000 cartons



1. Sealing for various curtain wall such as glass, aluminum and ceramics;
2. Sealing for marble, granite , concrete, brick and tile, metal panel;
3. Other uses.

1. Dont use for the alkaline materials such as marble, granite etc;
2. Dont use for the hide and semi-hide curtain wall and installation of coated glass by metal;
3. Unsuitable for the grease, plasticizer or solvent surfaces
4. Unsuitable for the bad-ventilated places because silicone sealant is easily cured after absorbing the moisture in the air;
5. Unsuitable for frost or humid places
6. Dont use it if the temperature of the surface is below 4°C or above 50°C.
7. Keep out of reach of children
Neutral Silicone Sealant

Neutral Anti-Mildew Silicone Sealant

Silicone sealant for waterproofing, glass windows, marble, aluminum panel curtain-wall.Kitchen appliances and sanitary ware

1.Characteristics:
JH-358 belongs to RTV-1 silicone sealant, expediently application between 5~40°C
Neutral curing, non-corrosive to marble (granite), aluminum, coated glass, most kinds of plastic etc;
Quickly speed of curing, excellent adhesion, middle , excellent movement capability;
Excellent resistance to weather, the service life is over 50 years in the condition of general weather;
Excellent resistance to low and high temperature change. Little changes of performance at -40°C ~150°C;
Excellent adhesive to aluminum panel, aluminum plastic panel and other building materials
Good compatibility with other neutral silicone sealants;

2.Purpose:
Waterproof anti-mildew sealing and glazing in santitaires;
Sealing for marble (granite), glass and metal plate curtain wall;
Perimeter glazing for windows and doors;
Many other building & Industrial uses.

3.Typical Technology Data:

Performance
Standard
JC/T 882-2001
Measured Value

Testing method
Other colors
Transparent
Slumpability (mm)
≤3
0
0

GB/T 13477
Extrusion (s)
≤10
2.8
0.9
Tack-Free Time (min)
≤180
60
50
Hardness (HsA)
/
46
31
GB/T 531
Loss of Heating %
≤10
3.9
3.9
ASTMC 792
Anti-mildew
0
0
0

Tensile strength in adhesion (Mpa)
≥0.4
0.98
0.537

GB/T 13477
Elongation at ultimate strength %
≥120
180
150
Permanent set adhesion
Non destroyed
Non destroyed
Non destroyed
Movement Capability %
±20
±20
±20
ASTMC 719
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.

4.Application Standard:
Standard JC/T 885-2001 Building usage anti-mildew silicone sealant

5.Restriction of Usage
Cant be used as structural sealant;
Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
Cannot be used the product, if the temperature is below 4°C or above 40°C on the surface of the materials.

6.Color and Package:
Color: White , Transparent ,or other colors on request to JH-358
Package: JH-358: 310ml Cartridge net 300ml,

7. Joint Design and Working Procedure:
Please refer to Section The Technology Instruction of Jianhua Silicone sealant

8. Technical Service
Offer the integral technical data of the product

9. Maintenance:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC

Neutral Antifungus Silicone Sealant OLV11

1, one part, neutral cure
2, antifungus especially for kitchen and bathroom; GP
3, high performance, one of best sellers
Description:
OLV11 Neutral Antifungus Silicone Sealant is a one part, neutral cure, silicone sealant that exhibits mildew resistance properties and for professional uses; It is formulated for uses in locations, where higher humidity is expected such as bathroom kitchen; and seals and waterproofs concerned facilities.

Main purposes:
1. Exhibits mildew resistance properties and for professional uses;
2. Formulated for uses in locations, where higher humidity is expected such as bathroom, kitchen, and seals and waterproofs concerned facilities.

Characteristics:
1. One-part; Room temperature; Neutral curing silicone sealant;
2. Neutral cure, non-corrosive to sensitive substrates;
3. For porous and alkali substrates (e.g. marble, granite, ceramics, plasters, etc);
4. Resistant to common domestic (non-corrosive) detergents.

Application:
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.

Limitations:
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Cant be used if the temperature is below 4°C or above 50°C on the surface of the material.

Shelf life: 12 months if keep sealing, and stored below 27
0
C in cool, dry place after the date of production.
Volume: 300ml

Technical data:
The following data are only for reference purpose, not intended for use in preparing specification.

OLV11 Neutral Antifungus Silicone Sealant
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±2
0
C:
Density (g/cm
3
)
±0.1
0.97
GB/T 13477
Tack-Free Time (min)
≤180
10
GB/T 13477
Extrusion (ml/min)
≥80
789
GB/T 13477
Tensile Modulus (Mpa)
23
0
C
0.4
0.41
GB/T 13477
20
0
C
or 0.6
/
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
≤3
0
GB/T 13477
Curing Speed (mm/d)
2
3
/
As Cured -After 21 days at 50±5% RH and temperature 23±2
0
C:
Hardness (Shore A)
20~60
32
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.57
GB/T 13477
Elongation of Rupture (% )
/
241
GB/T 13477
Movement Capability (%)
20
20
GB/T 13477
Mildew Proofing Class (grade)
0,1
1
GB1741
Storage
12 Months

Neutral Polyurethane Sealant Kater628

High adhesion strength
Good chemical corrosion resistance
Paintable
One part no mixing
Excellent noise, vibrat
Uses:
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.

Characteristies
High adhesion strength
Good chemical corrosion resistance

Paintable
One part no mixing
Excellent noise, vibration and Impaction resistant
No sagging
Anti mildew

Delivery date
within 15-20 days after receipt of deposit and design for cartridge and carton

Packaging
310ml aluminum cartridge;
300ml, 400ml and 600ml sausage; 250kgs bulk by drum;

Storage
At 5~25 centigrade shady, dry place, 12 months of shelf life.

Anti Fire
PU628 is not easy inflammable.

Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor

Neutral RTV gasket maker

Ideally Suited for Intake and Exhaust
Manifolds, Headers, Thermostat Housings, etc.
the series of neutral silicone sealant after years of research.
Neutral silicone sealants in current market are packaged in aluminum
an not be totally addition to the net. As a result,
the tails are easy to dry agglomeration. And the New neutral silicone
sealant is succeeded in overcoming this shortcoming.
A ) Long life .18months at least . As you know the neutral silicone is very easy to dry in the aluminum tube . But now, We conquer this shortcoming.
B) skin curing time is 5minutes ( shorter than other neutral which is 45minutes at least)
C) have no terrible odor .
D)lowest price
E)high density .
F)tensile strength is better than acid one.
G)good elongation
Instructions:
For best result,apply the sealant between +5 and +40.Surfaces must be clean,
dry,oil and frost free.The joint width must be min 5mm and max 30mm.The sealant
must be tooled immediately after the application before a skin forms.Excess uncured
sealant may be cleaned with solvent.Cured sealant can be reomved barely mechanically.
Notes:
A) Leave thickness for gasket when reassembling.Don't over-tighten the bolts.
B) Use with adequate ventilation.
C) Replace the cap after use.
D) If inhaled in over a prolonged period or in large volumes,the application must
take place in a well-ventilated room.Prolonged contact with uncured sealant must be avoided

Neutral RTV Silicone

Neutral RTV Silicone
Simply screw the lid tight, the tails of this series of products will
not easy to dry
Neutral RTV Silicone
In accordance with market demand, our technicians have developed
the 45XX series of neutral silicone sealant after years of research.
Neutral silicone sealants in current market are packaged in aluminum
tubes and rear air can not be totally addition to the net. As a result,
the tails are easy to dry agglomeration. And the New neutral silicone
sealant is succeeded in overcoming this shortcoming.

Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
Instructions:
For best result,apply the sealant between +5 and +40.Surfaces must be clean,
dry,oil and frost free.The joint width must be min 5mm and max 30mm.The sealant
must be tooled immediately after the application before a skin forms.Excess uncured
sealant may be cleaned with solvent.Cured sealant can be reomved barely mechanically.
Notes:
A) Leave thickness for gasket when reassembling.Don't over-tighten the bolts.
B) Use with adequate ventilation.
C) Replace the cap after use.
D) If inhaled in over a prolonged period or in large volumes,the application must
take place in a well-ventilated room.Prolonged contact with uncured sealant must be avoided.

Neutral Silicone Sealant SS601

SS601 Neutral Silicone Sealant is a universal construction silicone sealant.
Durometer - Shore A:
50 Shore A
Room Temperature Cure - Days:
7 Days to 14 Days
Ultimate Tensile Strength:
0.83Mpa
Service Temperature High:
-30 Deg C to 90 Deg C
Joint Movement Capability:
±12.5
Shelf Life:
6 month
Elongation:
≥100
Specific Gravity @ 25:
1.33
Working Time:
10~30Minutes
Tack-Free Time-50% RH:
80 Minutes
Full Adhesion Time:
14 Days to 21 Days
Other:
CHARACTERISTICS
SS601 belongs to RTV-1. Good extrusion and thixotropy between 4~+40. Easy to use;
Neutral curing, non-corrosive to metal, coated glass, concrete, marble, granite etc.
Release low-molecular-weight alcohol and no unpleasant odor during cure.
Excellent resistance to weather, UV, ozone, water;
Excellent resistance to low and high temperature change. No fragility, rigidification or crack at -50, and no softening, degradation at 150 when cured. It always keeps good elasticity;
Excellent adhesion to most common building material, and it has no use for finishes.
Good compatibility with other neutral silicone sealants.
APPLICATIONS
Glazing for all type door and window;
As a secondary edge adhesive sealant;
Sealing in aluminum curtain wall joints. Sealing in glass curtain wall joints;
Sealing for metal structural engineering joints;
Many other uses.

Neutral Silicone Sealant of catridge packing

Kamyip J2000 neutral silicone sealant is one part, neutral cures, will not corrode metal,UV and weater sesistant,ready to use.
Kamyip J2000 neutral silicone sealant

Characteristics:
General purpose, one component, neutral room temperature curing, ready to use, durable flexible, water resistant, UV and weather resistant, resistant to temperature extremes, Non-acidic, match a variety of substrates.
Application:
1. General industrial sealing and bonding applications.
2. Perimeter sealing of doors, windows, skylights.
3. Countertop
4. Billboard
5. Sanitary seals
6. Kitchen and bath
7. Plumbing
8. Roofing
Suitable use in the follow substrates:
Metal, stainless steel, aluminum, concrete, masonry, ceramic tiles, timber, fiberglass, PVC, majority plastic (pre-test) etc.
Instruction:
1.Clean with solvent such as toluene or acetone to keep the substrate surface completely clean and dry.
2.For better appearance, cover outside of join areas with masking tape before application.
3.Cut nozzle to desired size and extrude sealant to join areas.
4.Tool immediately after sealant application and remove masking tape before sealant skin forms.
Limitations:
1.The product is not applicable to structural assembly.
2.Not use on the surface that are continuously immersed in water.
3.Not use on frost laden and wet surfaces.
4.Not use in all materials that bleed oils, plasticizers or solvents.
5.Not use in a confined environment, the sealant requires atmospheric moisture for cure.
Storage:
Keep in dry and cool place below 30
o
C, Do not unseal it before use it.
Packaging:
Plastic cartridge: 280ml(net capacity), 300ml(net capacity).

Color: white, black, grey and customer order.


Testing Standard: GB/T14683-2003
No.:
Item
The Standard
Test Result
Individual Assessment
1
Appearance
Fine,smooth,homogeneous paste;
No bubbles,crust and agglomerations
Pass the standard
Passable
2
Droop Degree
(mm)
Uprightness
≤3
0
Passable
Level
No distortion
No distortion
Passable
3
Extrusion ability, (ml/min)
≥80
150
Passable
4
Tack Free Time, (h)
≤3
0.8
Passable
5
Tensile modulus
( Mpa)
23
o
C
0.4
or0.6
0.62
Passable
-20
o
C
/
Passable
6
Definite Elongation
No break
No break
Passable

3 Seconds Glue

3 Seconds Glue
Packing Qty: 192pcs/ctn
For stick PVC Flex Banner and other things.
It can change to hard by 3 second.
3 Seconds Glue

Packing Qty: 192pcs/ctn.
For stick PVC Flex Banner and other things.
It can change to hard by 3 second.