1.High Temperatures Resistant
2.Different color for choose
3.Apply to all engines and metals
4.Main Raw Material:Silicone
1. Derfoe RTV JT-688 Silicone gasket maker is a fast-curing, acid cure non-corrosive compound.
2. Formulated for hi-temp applications. Replaces almost any cut gasket.
3. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling.
4. Coats pre-cut gaskets to increase reliability
5. Temperature range-75°F to 662 Fintermittent; resists auto and shop fluids.
6. Available in 35ml and 85ml tubes
7. Available color: black, red, blue, grey, white, clear, According to customers.
Suggested applications:
Valve covers
Oil pans
Intake manifold end seals
Timing covers
Transmission pans
Water pumps
TECHNICAL DATA
Density g/m3 1.28
Tack free-time (at 25°c): 5-10(min)
Totally free time: 1-2 days
Saturday, July 23, 2011
RTV Silicone Gasket Maker
RTV Gasket Maker
silicon, adhesive, sealant
high temperature, High heat
Dries tough, flexible
Resists to engine fluids
I-LIKE RTV Silicone Gasket Maker is for high temperature applications up to 300: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.
Colors available: Red, Black, Grey, Blue
Package:
85g/pc; blistercard;
12 sets/box, 12 boxes/carton
350 cartons/20ft container
Carton Size: 420x405x440mm
silicon, adhesive, sealant
high temperature, High heat
Dries tough, flexible
Resists to engine fluids
I-LIKE RTV Silicone Gasket Maker is for high temperature applications up to 300: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.
Colors available: Red, Black, Grey, Blue
Package:
85g/pc; blistercard;
12 sets/box, 12 boxes/carton
350 cartons/20ft container
Carton Size: 420x405x440mm
RTV Silicone Gasket Maker
1.High Temperatures Resistant
2.Different color for choose
3.Apply to all engines and metals
4.Main Raw Material:Silicone
1. Derfoe RTV JT-638 Silicone gasket maker is a fast-curing, acid cure non-corrosive compound.
2. Formulated for hi-temp applications. Replaces almost any cut gasket.
3. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling.
4. Coats pre-cut gaskets to increase reliability
5. Temperature range-75°F to 662 Fintermittent; resists auto and shop fluids.
6. Available in 35ml and 85ml tubes
7. Available color: black, red, blue, grey, white, clear, According to customers.
Suggested applications:
Valve covers
Oil pans
Intake manifold end seals
Timing covers
Transmission pans
Water pumps
TECHNICAL DATA
Density g/m3 1.28
Tack free-time (at 25°c): 5-10(min)
Totally free time: 1-2 days
2.Different color for choose
3.Apply to all engines and metals
4.Main Raw Material:Silicone
1. Derfoe RTV JT-638 Silicone gasket maker is a fast-curing, acid cure non-corrosive compound.
2. Formulated for hi-temp applications. Replaces almost any cut gasket.
3. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling.
4. Coats pre-cut gaskets to increase reliability
5. Temperature range-75°F to 662 Fintermittent; resists auto and shop fluids.
6. Available in 35ml and 85ml tubes
7. Available color: black, red, blue, grey, white, clear, According to customers.
Suggested applications:
Valve covers
Oil pans
Intake manifold end seals
Timing covers
Transmission pans
Water pumps
TECHNICAL DATA
Density g/m3 1.28
Tack free-time (at 25°c): 5-10(min)
Totally free time: 1-2 days
RTV Silicone Gasket Maker
Acid RTV Silicone Gasket Maker Clear
High Temperatures Resistant
Ideally Suited for Intake and Exhaust
Manifolds, Headers
Acid RTV Silicone Gasket Maker transparent
Ideally Suited for Intake and Exhaust
Manifolds, Headers, Thermostat Housings, etc.
Leak-Proof;Will Not Foul Oxygen Sensors
Direction:
1.Remove old gasket matrial from surfaces thoroughly.
2.Clean surface with residue-free solvent and allow surface to dry.
3.Cut nozzle to desired size.
4.Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt holes.
5.Tool within 5 minutes.
6.Tightened to the required torque,do not overtighten.
7.Clean off excess sealant with M.E.K or toluene.
Note:Do not use for parts that are continuously immersed in gasoline
High Temperatures Resistant
Ideally Suited for Intake and Exhaust
Manifolds, Headers
Acid RTV Silicone Gasket Maker transparent
Ideally Suited for Intake and Exhaust
Manifolds, Headers, Thermostat Housings, etc.
Leak-Proof;Will Not Foul Oxygen Sensors
Direction:
1.Remove old gasket matrial from surfaces thoroughly.
2.Clean surface with residue-free solvent and allow surface to dry.
3.Cut nozzle to desired size.
4.Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt holes.
5.Tool within 5 minutes.
6.Tightened to the required torque,do not overtighten.
7.Clean off excess sealant with M.E.K or toluene.
Note:Do not use for parts that are continuously immersed in gasoline
RTV Silicone Gasket Maker
RTV Gasket Maker Red
Simply screw the lid tight, the tails of this series of products will
not easy to dry
RTV Gasket Maker Red
In accordance with market demand, our technicians have developed
the 45XX series of neutral silicone sealant after years of research.
Neutral silicone sealants in current market are packaged in aluminum
tubes and rear air can not be totally addition to the net. As a result,
the tails are easy to dry agglomeration. And the New neutral silicone
sealant is succeeded in overcoming this shortcoming.
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
Instructions:
For best result,apply the sealant between +5 and +40.Surfaces must be clean,
dry,oil and frost free.The joint width must be min 5mm and max 30mm.The sealant
must be tooled immediately after the application before a skin forms.Excess uncured
sealant may be cleaned with solvent.Cured sealant can be reomved barely mechanically.
Notes:
A) Leave thickness for gasket when reassembling.Don't over-tighten the bolts.
B) Use with adequate ventilation.
C) Replace the cap after use.
D) If inhaled in over a prolonged period or in large volumes,the application must
take place in a well-ventilated room.Prolonged contact with uncured sealant must be avoided.
Simply screw the lid tight, the tails of this series of products will
not easy to dry
RTV Gasket Maker Red
In accordance with market demand, our technicians have developed
the 45XX series of neutral silicone sealant after years of research.
Neutral silicone sealants in current market are packaged in aluminum
tubes and rear air can not be totally addition to the net. As a result,
the tails are easy to dry agglomeration. And the New neutral silicone
sealant is succeeded in overcoming this shortcoming.
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
Instructions:
For best result,apply the sealant between +5 and +40.Surfaces must be clean,
dry,oil and frost free.The joint width must be min 5mm and max 30mm.The sealant
must be tooled immediately after the application before a skin forms.Excess uncured
sealant may be cleaned with solvent.Cured sealant can be reomved barely mechanically.
Notes:
A) Leave thickness for gasket when reassembling.Don't over-tighten the bolts.
B) Use with adequate ventilation.
C) Replace the cap after use.
D) If inhaled in over a prolonged period or in large volumes,the application must
take place in a well-ventilated room.Prolonged contact with uncured sealant must be avoided.
4 Minute Epoxy Steel AB glue
Double components, stable and long-lasting function, resist from oil, water and transmission fluid, tough and strong adhesion.
Five Minutes Rapid Clear Epoxy Adhesive is based on the room temperature, having the features of:
(1) solidifying rapidly within 3-5 minutes,
(2) suitable for small parts and structural strength
(3) can be used after one hour
(4) quick set and high adhesive performance
(5) can be lacquered and waxed
(6) waterproof and chemical medium
(7) joint layer is clear and elastic
Adhesive Main Component:
A component is the modified Epoxy Resin, B component is modified Sulfur hardener
Scope Of Application:
The products of this series are widely used for bonding of metal and non-metals, connecting, sealing and repairing of hard materials, construction, automobile components, electronic components, also for usage in the material of pearls, jade, arts and crafts, antique etc.
Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for one hour during the normal temperature, it is suggested to operate at above 5ºC
Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.
Storage And Packing:
1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non dangerous products.
3.Packing specification: 20g/card, in tube.
For more information please refer to our Website
Five Minutes Rapid Clear Epoxy Adhesive is based on the room temperature, having the features of:
(1) solidifying rapidly within 3-5 minutes,
(2) suitable for small parts and structural strength
(3) can be used after one hour
(4) quick set and high adhesive performance
(5) can be lacquered and waxed
(6) waterproof and chemical medium
(7) joint layer is clear and elastic
Adhesive Main Component:
A component is the modified Epoxy Resin, B component is modified Sulfur hardener
Scope Of Application:
The products of this series are widely used for bonding of metal and non-metals, connecting, sealing and repairing of hard materials, construction, automobile components, electronic components, also for usage in the material of pearls, jade, arts and crafts, antique etc.
Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for one hour during the normal temperature, it is suggested to operate at above 5ºC
Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.
Storage And Packing:
1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non dangerous products.
3.Packing specification: 20g/card, in tube.
For more information please refer to our Website
RTV Silicone Gasket Maker
RTV Gasket Maker
Silicone Sealant,
Neutral cure
High temperature resistant
Apply to all engines and metals
RTV Gasket Maker
Silicone Sealant,
Neutral cure
High temperature resistant
Apply to all engines and metals
I-LIKE RTV Silicone,Silicone Sealant, Glass Sealant, Adhesive, Acetic silicone sealant, Acetoxy silicone sealant, Acid silicone sealant is single-component, acid curing, fast curing speed, low modulus, high displacement performance, excellent adhesion. It has excellent weather resistant performance and excellent ageing resistant performance. Excellent compatibility with most of building materials.
Item No.:
ID-121
Can Size
48mm x 220mm H
Package
280ml x 24 pcs/ctn
Carton Size
310x210x240 mm
20ft Container Loading
2000 cartons
1. Used for bonding and installation of various doors and windows, glass skylight, vitrine;
2. Sealing for Aluminum and Glass-curtain-wall;
3. Used for other industrial area..
RTV Silicone Gasket Maker
Silicone Sealant,
Neutral cure
High temperature resistant
Apply to all engines and metals
RTV Gasket Maker
Silicone Sealant,
Neutral cure
High temperature resistant
Apply to all engines and metals
I-LIKE RTV Silicone,Silicone Sealant, Glass Sealant, Adhesive, Acetic silicone sealant, Acetoxy silicone sealant, Acid silicone sealant is single-component, acid curing, fast curing speed, low modulus, high displacement performance, excellent adhesion. It has excellent weather resistant performance and excellent ageing resistant performance. Excellent compatibility with most of building materials.
Item No.:
ID-121
Can Size
48mm x 220mm H
Package
280ml x 24 pcs/ctn
Carton Size
310x210x240 mm
20ft Container Loading
2000 cartons
1. Used for bonding and installation of various doors and windows, glass skylight, vitrine;
2. Sealing for Aluminum and Glass-curtain-wall;
3. Used for other industrial area..
RTV Silicone Gasket Maker
RTV Silicone Gasket Sealant
High Temperature RTV Gasket Maker
RTV Silicone Gasket Maker
RED Acetic Gasket Maker
RTV Gasket Maker Sealant
Product Description:
SPART RTV Silicone Gasket Maker is a smooth,
thick purple paste. The anaerobic chemistry
of this product creates a tough flexible
formed-in-place gasket. Once confined
between 2 components, 732 RTV Silicone Gasket Maker
provides an instant low pressure seal.
Typical Applications
RTV Silicone Gasket Maker is used for fuel and water
pumps, split crank cases on engines, gearbo
covers, engine thermostats, air compressor
end caps, chainsaws, lawn mowers etc. This
product can be used with or without pre-cut
pre-formed gaskets.
Instructions for Use
Ensure parts are clean, dry and free from oil
and grease.
Procedure for Application
Product is normally hand applied from the
tube.
General Information
Storage
Product should be stored in a cool and dry
location at temperatures between -10 °C to
30 °C. Optimal storage is 22±4°C. Shelf life
is 18 months from date of manufacture when
stored at 22±4°C.
Note
Where gap size is large or where the surface
is uneven, apply a Vibra-TITE primer to
assist curing the product. 732 RTV Silicone Gasket Maker
can be roller coated, screen printed or pad
applied.
Health & Safety in use
IRRITANT: Contains Methylacrylate
Esters which may irritate eyes, respiratory
organs and skin. In case of contact with the
skin, wash immediately with plenty of
water.
RTV Silicone Gasket Maker
RED Acetic Gasket Maker
RTV Gasket Maker Sealant
Product Description:
SPART RTV Silicone Gasket Maker is a smooth,
thick purple paste. The anaerobic chemistry
of this product creates a tough flexible
formed-in-place gasket. Once confined
between 2 components, 732 RTV Silicone Gasket Maker
provides an instant low pressure seal.
Typical Applications
RTV Silicone Gasket Maker is used for fuel and water
pumps, split crank cases on engines, gearbo
covers, engine thermostats, air compressor
end caps, chainsaws, lawn mowers etc. This
product can be used with or without pre-cut
pre-formed gaskets.
Instructions for Use
Ensure parts are clean, dry and free from oil
and grease.
Procedure for Application
Product is normally hand applied from the
tube.
General Information
Storage
Product should be stored in a cool and dry
location at temperatures between -10 °C to
30 °C. Optimal storage is 22±4°C. Shelf life
is 18 months from date of manufacture when
stored at 22±4°C.
Note
Where gap size is large or where the surface
is uneven, apply a Vibra-TITE primer to
assist curing the product. 732 RTV Silicone Gasket Maker
can be roller coated, screen printed or pad
applied.
Health & Safety in use
IRRITANT: Contains Methylacrylate
Esters which may irritate eyes, respiratory
organs and skin. In case of contact with the
skin, wash immediately with plenty of
water.
RTV Silicone Hi-Temp Gasket Maker Black MQ-128
Hi-Temp RTV silicone Gasket Maker
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
RTV Silicone Hi-Temp Gasket Maker
Hi-Temp RTV silicone Gasket Maker
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
RTV Silicone Rubber
RTV Silicone Rubber
1,Material:silicone
2,Smell:tasteless
3,Shelf time:1year
4,Character:Emulsion
RTV Silicone Rubber
It is Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion.
Silicon Ruber
Nature:
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation, resist from oil, water and transmission fluid, as well as cracking and migration caused by thermal cycling.
Usage:
Effect strong adhesion between hardware, plastic and other materials. Widely used in light industry, machinery, home decoration, electronic assents etc.
Direction:
1.Clean the surface of the objects to be glued thoroughly.
2.Remove cap, squeeze a suitable amount of this glue onto the surface.
3.Press the two surfaces with glue together.
Tech information:
Solidification: 3-15 minutes outer solidify, 3-5hours inner solidify.
Color: cream (703) or transparent (705).
Extension: 225%
Working temperature: -60ºC to 150ºC
Working voltage: 14KV/mm
Cutting strength: 14kg/Cm (703) 13kg/Cm (705)
1,Material:silicone
2,Smell:tasteless
3,Shelf time:1year
4,Character:Emulsion
RTV Silicone Rubber
It is Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion.
Silicon Ruber
Nature:
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation, resist from oil, water and transmission fluid, as well as cracking and migration caused by thermal cycling.
Usage:
Effect strong adhesion between hardware, plastic and other materials. Widely used in light industry, machinery, home decoration, electronic assents etc.
Direction:
1.Clean the surface of the objects to be glued thoroughly.
2.Remove cap, squeeze a suitable amount of this glue onto the surface.
3.Press the two surfaces with glue together.
Tech information:
Solidification: 3-15 minutes outer solidify, 3-5hours inner solidify.
Color: cream (703) or transparent (705).
Extension: 225%
Working temperature: -60ºC to 150ºC
Working voltage: 14KV/mm
Cutting strength: 14kg/Cm (703) 13kg/Cm (705)
RTV Silicone Sealant
rtv silicone sealant:for Electronic parts fixation, circuit board felt, glass,lighting and construction industries
1.Usage of
rtv
silicone sealant
:
HY-86x rtv silicone sealant
is used for Electronic parts fixation, circuit board felt, glass,lighting and construction industries.
2.Features of rtv
silicone sealant
:
The
silicone sealant
, which is a
neutral organic silicone
structural sealant, has good bonding strength and sealing performance for most materials.
HY 86x silicone sealant
has excellent electrical insulation properties, moisture-proof,anticorona,shock-absorbing function; good temperature resistance with a range of -60~300; excellent outdoor anti-ageing with a service life of 20-30 years; as well as excellent combination properties of non-yellowing and non-oil permeability,etc.
3.Typical applications of
silicone sealant
:
Sealing and bonding cracks and gaps,widely used, waterproof, mildewproof,lasting elasticity. This product can be used for sealing glass,ceramics,enamel,porcelain tiles,plastics,metals and wood. It is applicable to aquariums and fish tank.
Any more information,please feel free to contact
Berry at
Tel:86-755-89948006
Mob:86-13418479937
Fax:86-755-89948030
1.Usage of
rtv
silicone sealant
:
HY-86x rtv silicone sealant
is used for Electronic parts fixation, circuit board felt, glass,lighting and construction industries.
2.Features of rtv
silicone sealant
:
The
silicone sealant
, which is a
neutral organic silicone
structural sealant, has good bonding strength and sealing performance for most materials.
HY 86x silicone sealant
has excellent electrical insulation properties, moisture-proof,anticorona,shock-absorbing function; good temperature resistance with a range of -60~300; excellent outdoor anti-ageing with a service life of 20-30 years; as well as excellent combination properties of non-yellowing and non-oil permeability,etc.
3.Typical applications of
silicone sealant
:
Sealing and bonding cracks and gaps,widely used, waterproof, mildewproof,lasting elasticity. This product can be used for sealing glass,ceramics,enamel,porcelain tiles,plastics,metals and wood. It is applicable to aquariums and fish tank.
Any more information,please feel free to contact
Berry at
Tel:86-755-89948006
Mob:86-13418479937
Fax:86-755-89948030
RTV Silicone Sealant
RTV Silicone Sealant
One part, High modulus.
Easy to use at any temperature.
use to bonding and sealing
RTV Silicone Sealant
Basis application:
FO-3592 acidic sealant can be used for bonding or
sealing of glass, aluminum, vitreous, enamel,
plastics and wood, such as door frames, shop
windows, exhibition shelf and nameplate.
Storing:
FO-3592 isn't dangerous. Please store in dry
place out of sunlight at the temperature below
25
o
C
TECHNICAL DATE SHEET1
ITEM UNIT VALUE
Cure system depickle Specific gravity g/ml 0.93-0.96Skin-over time (23°C , 50% R.H.) min less than 10Cure rate (23°C , 50% R.H., 1day) mm 22mm thickness S2 dumb-bells (ASTM D412) Tensile strength MPa 0. 8 Elongation at break % more than 300 Hardness (Shore A) 22
One part, High modulus.
Easy to use at any temperature.
use to bonding and sealing
RTV Silicone Sealant
Basis application:
FO-3592 acidic sealant can be used for bonding or
sealing of glass, aluminum, vitreous, enamel,
plastics and wood, such as door frames, shop
windows, exhibition shelf and nameplate.
Storing:
FO-3592 isn't dangerous. Please store in dry
place out of sunlight at the temperature below
25
o
C
TECHNICAL DATE SHEET1
ITEM UNIT VALUE
Cure system depickle Specific gravity g/ml 0.93-0.96Skin-over time (23°C , 50% R.H.) min less than 10Cure rate (23°C , 50% R.H., 1day) mm 22mm thickness S2 dumb-bells (ASTM D412) Tensile strength MPa 0. 8 Elongation at break % more than 300 Hardness (Shore A) 22
RTV Silicone Sealant
sanitary silicone sealant, acetic silicone, kitchens and bathroom silicone, waterproof silicone
TECHPOWER
PREMIUM SANITARY SILICONE SEALANT
Property
TECHPOWER129
is a premium general purpose silicone sealant for use in humidity enviroments such as kitchens and bathrooms. It is an ideal sealant for construction sealing applications where mildew resistance is required.
Properties:
Rapid curing.
Perfect adhesion to most non-porous substrates.
No shrinkage, 100% silicone
Resists mildew even in prolonged hot and humid enviroments.
Stays permenantly elastic.
Acetoxy curing system.
Resistance to aging, cracking and discoloring.
Resistance to many chemicals, cleaning agents and detergents.
One component, moisture-cured.
Applications:
Sealing around bathtubs, shower tubs, sinks
Building joints in humid enviroments
Sealing applications in kitchens
Sealing around shower cabins.
Sealing applicatons in air conditioning systems
Sealing sanitary technical applicances and kitchen applicances.
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification: 250ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
Optional Color: Black, white, transparent, grey or on requested.
Testing Standard: GB/T14683-2003 Silicone Building Sealant
NO.
Item
Data
1
Type
Acetoxy
2
Density g/cm
3
0.96
3
Capacity movement
±30%
4
Skinning time
5-15 minutes
5
Drying time(2mm/h)
10-12
6
Drying(4mm/h)
24-30
7
Max. Tensile strength
1.3
8
Hardness shore
18±2
9
Elongation at Break(%)
≥500
10
Modulus Mpa(100%)
0.55
11
Application temperature
-20 to +40
12
Temperature resistance
-50 to +100
13
adhesive
OK
14
Weatherproof
OK
15
Cold-hot adhesive
OK
16
Under water adhesive
OK
17
Elastic Recovery Ratio
96
18
Mass-loss Rate
40
Skin drying time and fully drying time under: 23 and 50% humidity
TECHPOWER
PREMIUM SANITARY SILICONE SEALANT
Property
TECHPOWER129
is a premium general purpose silicone sealant for use in humidity enviroments such as kitchens and bathrooms. It is an ideal sealant for construction sealing applications where mildew resistance is required.
Properties:
Rapid curing.
Perfect adhesion to most non-porous substrates.
No shrinkage, 100% silicone
Resists mildew even in prolonged hot and humid enviroments.
Stays permenantly elastic.
Acetoxy curing system.
Resistance to aging, cracking and discoloring.
Resistance to many chemicals, cleaning agents and detergents.
One component, moisture-cured.
Applications:
Sealing around bathtubs, shower tubs, sinks
Building joints in humid enviroments
Sealing applications in kitchens
Sealing around shower cabins.
Sealing applicatons in air conditioning systems
Sealing sanitary technical applicances and kitchen applicances.
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification: 250ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
Optional Color: Black, white, transparent, grey or on requested.
Testing Standard: GB/T14683-2003 Silicone Building Sealant
NO.
Item
Data
1
Type
Acetoxy
2
Density g/cm
3
0.96
3
Capacity movement
±30%
4
Skinning time
5-15 minutes
5
Drying time(2mm/h)
10-12
6
Drying(4mm/h)
24-30
7
Max. Tensile strength
1.3
8
Hardness shore
18±2
9
Elongation at Break(%)
≥500
10
Modulus Mpa(100%)
0.55
11
Application temperature
-20 to +40
12
Temperature resistance
-50 to +100
13
adhesive
OK
14
Weatherproof
OK
15
Cold-hot adhesive
OK
16
Under water adhesive
OK
17
Elastic Recovery Ratio
96
18
Mass-loss Rate
40
Skin drying time and fully drying time under: 23 and 50% humidity
RTV Silicone Sealant
Wide range of of RTV Silicon product for application such as: General mold making, pad printing, electronic encapsulation, seali
We are supply wide range of Epoxy and Polyurethane resin systems, RTV Silicone Rubbers and model board. Wide range of industrial sectors, which include:
Rapid Prototyping and Vacuum Casting
Modeling
Pattern-making
Ceramics and Figurines
Vacuum Forming
CNC Machining
General Mould Making
Aluminum filled epoxy mold making for limited production use
Electronic Encapsulation and Adhesives
The Electrical Industry
Automotive / Formula 1
Fiber Glass Manufacturing
Oil & Gas
Pipeline repair
Marine
Architectural
Construction
For more information, please contact us for detail.
We are supply wide range of Epoxy and Polyurethane resin systems, RTV Silicone Rubbers and model board. Wide range of industrial sectors, which include:
Rapid Prototyping and Vacuum Casting
Modeling
Pattern-making
Ceramics and Figurines
Vacuum Forming
CNC Machining
General Mould Making
Aluminum filled epoxy mold making for limited production use
Electronic Encapsulation and Adhesives
The Electrical Industry
Automotive / Formula 1
Fiber Glass Manufacturing
Oil & Gas
Pipeline repair
Marine
Architectural
Construction
For more information, please contact us for detail.
RTV Silicone Sealant
Grey, neutral, low odor, no corrosion to machine parts,medium elongation,good lubricat, transmission oil, gear oil resistance.
Introduction
Darbond 2599 is one component, de-oxime, room temperature vulcanizing silicone sealant. It has good properties of no corrosion, low odor, low volatility and good lubricating oil resistance, suitable for manual dispensing.
Typical Properties
--
Grey, neutral, low odor, no corrosion to machine parts.
-- Superior flexibility, easy extrusion, medium elongation.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machine, such as automobile, engineering machine, internal combustion engine, mining machine, transformer and electrical equipment flange sealing.
Typical Applications
Mainly used for joint surface sealing of power machines, such as reduction gears, water pump, valve and internal combustion engine etc. parts.
Introduction
Darbond 2599 is one component, de-oxime, room temperature vulcanizing silicone sealant. It has good properties of no corrosion, low odor, low volatility and good lubricating oil resistance, suitable for manual dispensing.
Typical Properties
--
Grey, neutral, low odor, no corrosion to machine parts.
-- Superior flexibility, easy extrusion, medium elongation.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machine, such as automobile, engineering machine, internal combustion engine, mining machine, transformer and electrical equipment flange sealing.
Typical Applications
Mainly used for joint surface sealing of power machines, such as reduction gears, water pump, valve and internal combustion engine etc. parts.
4 Modified Epoxy Resin Injection Adhesive for Planting Stud Bolt
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
RTV Silicone gasket maker
Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc. RTV Silicone gasket maker is a smooth, thic
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Note: Do not use for parts that are continuously immersed in gasoline
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use
Irritant: Contains methylacrylate esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Note: Do not use for parts that are continuously immersed in gasoline
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use
Irritant: Contains methylacrylate esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
RTV Silicone gasket maker
Item No: GF-11AB
RTV Silicone Gasket Maker Red
Ideally suited for Intake and Exhaust Manifolds,Headers,Thermostat Housings,ect
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: As same as other silicone sealant,
such as GF-4596 in Grade AA is up to 300 ° C.
Red: GF-11AB
Grey: GF-15AB
RTV Silicone Gasket Maker Red
Ideally suited for Intake and Exhaust Manifolds,Headers,Thermostat Housings,ect
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: As same as other silicone sealant,
such as GF-4596 in Grade AA is up to 300 ° C.
Red: GF-11AB
Grey: GF-15AB
RTV Silicone gasket maker
Item No: FO-159x
1.Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use .
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: -60°C--+300°C.
Product packaging sizes(FO-159X)
85g(3 oz)
144pcs/CTN GW: 18.65Kg
OUTER CARTON MEAS.
46X39.5X45cm
ONE 20'GP CAN CONTAIN 350 CTNS
1.Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use .
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: -60°C--+300°C.
Product packaging sizes(FO-159X)
85g(3 oz)
144pcs/CTN GW: 18.65Kg
OUTER CARTON MEAS.
46X39.5X45cm
ONE 20'GP CAN CONTAIN 350 CTNS
RTV Silicone sealant
rtv silicone sealant,single component, low modulus,acetic cure and high performance,is ideal for mutil- General purpose use
RTV silicone sealant
single-component, non-slumping that cures
to a permanently flexible silicone rubber on exposure to atmospheric moistureat room temperature. Formulated for hi-temp applications, or heavy duty use (such
as towing, etc), replaces almost any cut gasket by making reliable "formed-in-place"
gaskets that resist cracking or shrinking, and migrating caused by thermalcycling. Coats pro-cut gaskets to increase reliability. Resists auto and shop fluids.
Application:drive housings, exhaust manifolds, thermostat housings, valve covers, water pumps,
Usage:
1.Clean surface thoroughly and remove the old gasket then prepare the flange surface.Dry and remove all oil and grease.
2.Open the cap, puncture the inner seal of the tube,screw on the nozzle and cut the nozzle to the designed size.
3.Smear certain amount of sealant around the bolt,make sure the layer is thick enough.
4.Wait for about 10 minute to ensure the solidification effect,then reassemble the parts.
5.Touch it unless it dry for 1 hour and 24 hours to fully cure and bond.
RTV silicone sealant
single-component, non-slumping that cures
to a permanently flexible silicone rubber on exposure to atmospheric moistureat room temperature. Formulated for hi-temp applications, or heavy duty use (such
as towing, etc), replaces almost any cut gasket by making reliable "formed-in-place"
gaskets that resist cracking or shrinking, and migrating caused by thermalcycling. Coats pro-cut gaskets to increase reliability. Resists auto and shop fluids.
Application:drive housings, exhaust manifolds, thermostat housings, valve covers, water pumps,
Usage:
1.Clean surface thoroughly and remove the old gasket then prepare the flange surface.Dry and remove all oil and grease.
2.Open the cap, puncture the inner seal of the tube,screw on the nozzle and cut the nozzle to the designed size.
3.Smear certain amount of sealant around the bolt,make sure the layer is thick enough.
4.Wait for about 10 minute to ensure the solidification effect,then reassemble the parts.
5.Touch it unless it dry for 1 hour and 24 hours to fully cure and bond.
RTV Silicone sealant
Part No. FO-359X
1.280 or 300ml/PC, 24 PCS/CTN
2.OUTER CARTON MEAS. 31X20X24cm
3ONE 20 FEET CONTAINER CAN CONTAIN 1900 CTN
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Storage
Please store in dry place out of sunlight at the temperature below 25degreeC .
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: -60°C--+300°C.
Part No. FO-359X
280 or 300ml/PC, 24 PCS/CTN
OUTER CARTON MEAS. 31X20X24cm
ONE 20 FEET CONTAINER CAN CONTAIN 1900 CTNS
1.280 or 300ml/PC, 24 PCS/CTN
2.OUTER CARTON MEAS. 31X20X24cm
3ONE 20 FEET CONTAINER CAN CONTAIN 1900 CTN
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Storage
Please store in dry place out of sunlight at the temperature below 25degreeC .
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: -60°C--+300°C.
Part No. FO-359X
280 or 300ml/PC, 24 PCS/CTN
OUTER CARTON MEAS. 31X20X24cm
ONE 20 FEET CONTAINER CAN CONTAIN 1900 CTNS
RTV Silicone sealant
Item No: GF-10AB
1.RTV Silicone Gasket Maker blue
2.Ideally suited for Intake and Exhaust Manifolds,Headers,Thermostat Housing
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: As same as other silicone sealant,
such as GF-4596 in Grade AA is up to 300 ° C.
1.RTV Silicone Gasket Maker blue
2.Ideally suited for Intake and Exhaust Manifolds,Headers,Thermostat Housing
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: As same as other silicone sealant,
such as GF-4596 in Grade AA is up to 300 ° C.
RTV Silicone
RTV Gasket Maker
RTV Silicone Gasket Maker
Silicone Gasket Maker
RTV gasket maker
Main feature:
1.It can substitute any gasket instantly,the specific gravity is 1.2-1.6 g/m3
2.Room temperature solidification,after curing,it resists cracking,shrinking and migration caused by thermal cycling,surface de-viscidity is 20-30 minutes,extention strength is 2.4mpa
3.Good resistance of water,oil,anti-freeze and transmission fluid.
Usage:
1.Clean surface thoroughly and remove the old gasket then prepare the flange surface.Dry and remove all oil and grease.
2.Open the cap, puncture the inner seal of the tube,screw on the nozzle and cut the nozzle to the designed size.
3.Smear certain amount of sealant around the bolt,make sure the layer is thick enough.
4.Wait for about 10 minute to ensure the solidification effect,then reassemble the parts.
5.Touch it unless it dry for 1 hour and 24 hours to fully cure and bond
RTV Silicone Gasket Maker
Silicone Gasket Maker
RTV gasket maker
Main feature:
1.It can substitute any gasket instantly,the specific gravity is 1.2-1.6 g/m3
2.Room temperature solidification,after curing,it resists cracking,shrinking and migration caused by thermal cycling,surface de-viscidity is 20-30 minutes,extention strength is 2.4mpa
3.Good resistance of water,oil,anti-freeze and transmission fluid.
Usage:
1.Clean surface thoroughly and remove the old gasket then prepare the flange surface.Dry and remove all oil and grease.
2.Open the cap, puncture the inner seal of the tube,screw on the nozzle and cut the nozzle to the designed size.
3.Smear certain amount of sealant around the bolt,make sure the layer is thick enough.
4.Wait for about 10 minute to ensure the solidification effect,then reassemble the parts.
5.Touch it unless it dry for 1 hour and 24 hours to fully cure and bond
RTV Vulcanization Silicone Rubber Raw Material H107
RTV Vulcanization Silicone Rubber Raw Material
1.colorless transparent liquid
2.viscous fluid paste
3.Volatile matter
RTV Vulcanization Silicone Rubber Raw Material H107
INTRODUCTION
RTV vulcanization silicone rubber is a new type organic synthetic material with high molecular weight poly and straight chainlike. Its physical form is usually liquid and paste. It will be solidified into elastic solid, when it met right sulfuring agent. H107 has these performances: heat resistance (200°C), cold resistance (-70°C), ageing resistance, corrosion resistance, water proof, non-toxic, insulation, seismic resistance, excellent simulation, nice demould time and extreme shrinkage etc.
Structure: HO-Si (CH3) 2 O (Si (CH3) 2 O) nSi (CH3)2-OH
SPECIFICATION
Specification—uncured.
1) Appearance.colorless transparent liquid or viscous fluid paste
2) Viscosity.1000~1000000 centipoise
3) Volatile matter. <1.5% (150·C/3h)
Specification--cured.
1) Hardness. >20A
2) Tensile strength. >3.5KG/CM2
3) Brittleness temperature. <70°C
4) Volume resistivity. ≥110 MΩ•m {Ω•cm}
5) Dielectric constant. ≤3.2 (1MHZ)
6) Breakdown voltage.≤13kv/mm
STORAGE
1) Store in a dry, cool place away from direct sunlight.
2) Keep away from alkaline substances and some organic salts.
3) Material removed from containers may be contaminated during use. Do not return product to the original container.
APPLICATION
H107 is widely used in mould silicone rubber, building silicone rubber, silicone adhesive/sealants, and pouring sealant so on.
1.colorless transparent liquid
2.viscous fluid paste
3.Volatile matter
RTV Vulcanization Silicone Rubber Raw Material H107
INTRODUCTION
RTV vulcanization silicone rubber is a new type organic synthetic material with high molecular weight poly and straight chainlike. Its physical form is usually liquid and paste. It will be solidified into elastic solid, when it met right sulfuring agent. H107 has these performances: heat resistance (200°C), cold resistance (-70°C), ageing resistance, corrosion resistance, water proof, non-toxic, insulation, seismic resistance, excellent simulation, nice demould time and extreme shrinkage etc.
Structure: HO-Si (CH3) 2 O (Si (CH3) 2 O) nSi (CH3)2-OH
SPECIFICATION
Specification—uncured.
1) Appearance.colorless transparent liquid or viscous fluid paste
2) Viscosity.1000~1000000 centipoise
3) Volatile matter. <1.5% (150·C/3h)
Specification--cured.
1) Hardness. >20A
2) Tensile strength. >3.5KG/CM2
3) Brittleness temperature. <70°C
4) Volume resistivity. ≥110 MΩ•m {Ω•cm}
5) Dielectric constant. ≤3.2 (1MHZ)
6) Breakdown voltage.≤13kv/mm
STORAGE
1) Store in a dry, cool place away from direct sunlight.
2) Keep away from alkaline substances and some organic salts.
3) Material removed from containers may be contaminated during use. Do not return product to the original container.
APPLICATION
H107 is widely used in mould silicone rubber, building silicone rubber, silicone adhesive/sealants, and pouring sealant so on.
RTV acetoxy silicone sealant for general purpose
High performance acetoxy silicone sealant
Neutral RTV;
Fast cure;
Weather proof;
No turn yellow.
RTV acetoxy silicone sealant for general purpose
Functions:
1) All types of building components;
2) Aluminous glass windows;
3) Aluminum curtain wall;
4) Porcelain and bathtub.
Net weight: 200g/tube, 280g/tube.
Gross weight: 240g/tube, 320g/tube.
Neutral RTV;
Fast cure;
Weather proof;
No turn yellow.
RTV acetoxy silicone sealant for general purpose
Functions:
1) All types of building components;
2) Aluminous glass windows;
3) Aluminum curtain wall;
4) Porcelain and bathtub.
Net weight: 200g/tube, 280g/tube.
Gross weight: 240g/tube, 320g/tube.
RTV gasket maker(all color)
RTV gasket maker (all color)
1) fast curing ,one part
2) high quality and can made with OEM
3) resist hi-temp;cracking
RTV gasket maker -all color
RTV SILICONE GASKET MAKER SEC-688
FEATURES
1Derfoe RTV SEC-638 silicone gasket maker is a fast-curing, acid cure non-corrosive compound
2
Formulated for hi-temp application.Replaces almost any cut gasket
3
Makers reliable formed-in-place gaskets that resist cracking.shrinking and
migrating cused by the thermal cycling. Coasts pre-cut gaskets to increase reliability.
4
Temperature range -75F to 662F intermittent; resists auto and shop fluids.
5
Available in 35ml and85ml tubes
6
Available color: black grey red white blue and clear
Sugest applications include:
-valve covers
-oil pans
-intake manifold end seals
-timing covers
-transmission pans
TECHNICAL DATA
density g/m
3
1.28
tack free-time(at 25°c): 5-10(min)
totally free time: 1-2 days
shore hardness A 35
DISCRIPTION
1. RTv silicone gasket maker is use for auto parts
2. it is very easy to use and replace almost any cut gasket
3.can formulate hi-temp
PCAKING & DELIVERY TIME
packing details: tube,144pcs/ctn,44*44*46cm
delivery time:20-40 days
NOTE
1) Flexible and stable at all temperatures from-76°F to 580 °F(-60°c to 304 °c)
2) Not recommed for continuous immersion in gasoline
3) Do not use instant gasket only when replacing cylinder head gasket with predetermind tolerance
4) store at cool and dry place
CERTIFICAIONS:
1) fast curing ,one part
2) high quality and can made with OEM
3) resist hi-temp;cracking
RTV gasket maker -all color
RTV SILICONE GASKET MAKER SEC-688
FEATURES
1Derfoe RTV SEC-638 silicone gasket maker is a fast-curing, acid cure non-corrosive compound
2
Formulated for hi-temp application.Replaces almost any cut gasket
3
Makers reliable formed-in-place gaskets that resist cracking.shrinking and
migrating cused by the thermal cycling. Coasts pre-cut gaskets to increase reliability.
4
Temperature range -75F to 662F intermittent; resists auto and shop fluids.
5
Available in 35ml and85ml tubes
6
Available color: black grey red white blue and clear
Sugest applications include:
-valve covers
-oil pans
-intake manifold end seals
-timing covers
-transmission pans
TECHNICAL DATA
density g/m
3
1.28
tack free-time(at 25°c): 5-10(min)
totally free time: 1-2 days
shore hardness A 35
DISCRIPTION
1. RTv silicone gasket maker is use for auto parts
2. it is very easy to use and replace almost any cut gasket
3.can formulate hi-temp
PCAKING & DELIVERY TIME
packing details: tube,144pcs/ctn,44*44*46cm
delivery time:20-40 days
NOTE
1) Flexible and stable at all temperatures from-76°F to 580 °F(-60°c to 304 °c)
2) Not recommed for continuous immersion in gasoline
3) Do not use instant gasket only when replacing cylinder head gasket with predetermind tolerance
4) store at cool and dry place
CERTIFICAIONS:
4 Not contain styrene and non-toxic Epoxy Resin Injective Adhesive
1.Bicomponent modified epoxy resin injection anchor adhesive
2.Not contain styrene, non-toxic
3.Good thixotropy
4.Convenie
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.
2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
.
Performance indexes
item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11
≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)
10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)
14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8
depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1
2.Not contain styrene, non-toxic
3.Good thixotropy
4.Convenie
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.
2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
.
Performance indexes
item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11
≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)
10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)
14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8
depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1
RTV neutral SILICONE sealant
RTV neutral SILICONE sealant
RTV neutral SILICONE sealant
Black
fine
paste
, easy
out
,
easy to
glue
,
non-flowing
,
non-polluting
engines
and components.
Accumulation of
good,
filling
the gap
of
6mm.
Oil, water
,
excellent
weather resistance
,
temperature
-60 °C - +260 °C,
resistance to
pressure
10Pma,
non-toxic
glue
, neutral
curing
,
non-
irritating
substances
released
.
Black
fine
paste
, easy
out
,
easy to
glue
,
non-flowing
,
non-polluting
engines
and components.
Accumulation of
good,
filling
the gap
of
6mm.
Oil, water
,
excellent
weather resistance
,
temperature
-60 °C - +260 °C,
resistance to
pressure
10Pma,
non-toxic
glue
, neutral
curing
,
non-
irritating
substances
released
RTV neutral SILICONE sealant
Black
fine
paste
, easy
out
,
easy to
glue
,
non-flowing
,
non-polluting
engines
and components.
Accumulation of
good,
filling
the gap
of
6mm.
Oil, water
,
excellent
weather resistance
,
temperature
-60 °C - +260 °C,
resistance to
pressure
10Pma,
non-toxic
glue
, neutral
curing
,
non-
irritating
substances
released
.
Black
fine
paste
, easy
out
,
easy to
glue
,
non-flowing
,
non-polluting
engines
and components.
Accumulation of
good,
filling
the gap
of
6mm.
Oil, water
,
excellent
weather resistance
,
temperature
-60 °C - +260 °C,
resistance to
pressure
10Pma,
non-toxic
glue
, neutral
curing
,
non-
irritating
substances
released
RTV neutral silicone sealant gasket
RTV neutral silicone sealant gasket
HI-TEMP RTV neutral SILICONE SEALANT GASKET MARKER
RTV neutral silicone sealant gasket
HI-TEMP SILICONE SEALANT GASKET MARKER
it is red&grey, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
-- red&grey, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
HI-TEMP RTV neutral SILICONE SEALANT GASKET MARKER
RTV neutral silicone sealant gasket
HI-TEMP SILICONE SEALANT GASKET MARKER
it is red&grey, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
-- red&grey, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
Friday, July 22, 2011
RTV neutral silicone sealant gasket
RTV neutral silicone sealant gasket
hi-temp RTV neutral silicone sealant gasket marker
Features: This product is self-forming gasket sealant, silicone technology in general based on the combined Asia-Pacific automobile parts manufacturing plant on the performance requirements, and tailor-made research and development, improve the maintenance process of the first with materials safety and eligibility.
This product is a single-component, paste, room temperature curing, good oil resistance, easy to clean, easy to repair the second. Widely used in automobile, motorcycle engines, gearboxes, front and rear axles, pumps and other parts of the flat flange. Cover other combination of surface sealing.
it is grey, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
--grey, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
hi-temp RTV neutral silicone sealant gasket marker
Features: This product is self-forming gasket sealant, silicone technology in general based on the combined Asia-Pacific automobile parts manufacturing plant on the performance requirements, and tailor-made research and development, improve the maintenance process of the first with materials safety and eligibility.
This product is a single-component, paste, room temperature curing, good oil resistance, easy to clean, easy to repair the second. Widely used in automobile, motorcycle engines, gearboxes, front and rear axles, pumps and other parts of the flat flange. Cover other combination of surface sealing.
it is grey, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
--grey, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
RTV neutral silicone sealant gasket
RTV neutral silicone sealant gasket
red hi-temp rtv silicone gasket marker.
RTV neutral silicone sealant gasket
car hi-temp rtv silicone sealant gasket
red, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
-- red, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
silicone sealant :red hi-temp rtv silicone gasket marker.
car hi-temp rtv silicone sealant gasket
red hi-temp rtv silicone gasket marker.
RTV neutral silicone sealant gasket
car hi-temp rtv silicone sealant gasket
red, neutral, low odor, no corrosion to machine parts.
Ideal for large gaps, aston silicone flange sealants cure at room temperature and make super flexible gaskets between two mating flanges after cured. It's neutral and not corrosive to metal parts, good chemical and weather resistance.
Features:
-- red, neutral, low odor, no corrosion to machine parts.
-- Low elongation, instant seal.
-- Dispense by equipment or pneumatic gun.
-- Good resistance to lubricat, transmission oil, gear oil and good weather resistance.
-- Used for power motive machines, such as automobile, engineering machine,
internal combustion engine flange sealing.
silicone sealant :red hi-temp rtv silicone gasket marker.
car hi-temp rtv silicone sealant gasket
RTV sealant ( acetoxy)
100% Imported Raw materials
Resistant to Extreme Tempretures,weather and pressure and petroleum Related
High-Tem RTV Silicone ( Gasket Maker )
Color: Red, Grey, Black, Blue, Transparent, White
Main feature:
It can substitute any gasket instantly.
It is Ideal forming covers, value vocer, oil pans, intake manifolds, water pumps, dires secureiy as gasket.
Room temperature solidification,after curing,it resists cracking,shrinking and migration caused by thermal cycling.
Good resistance of water,oil,anti-freeze and transmission fluid.
It is resistance Tem from -80 F to 650 F ( 343 degree c ).
Packing: 15gm , 32gm, 50gm,71gm,85gm,100gm, 300ml tube with box or tube with blister card.
Resistant to Extreme Tempretures,weather and pressure and petroleum Related
High-Tem RTV Silicone ( Gasket Maker )
Color: Red, Grey, Black, Blue, Transparent, White
Main feature:
It can substitute any gasket instantly.
It is Ideal forming covers, value vocer, oil pans, intake manifolds, water pumps, dires secureiy as gasket.
Room temperature solidification,after curing,it resists cracking,shrinking and migration caused by thermal cycling.
Good resistance of water,oil,anti-freeze and transmission fluid.
It is resistance Tem from -80 F to 650 F ( 343 degree c ).
Packing: 15gm , 32gm, 50gm,71gm,85gm,100gm, 300ml tube with box or tube with blister card.
RTV silicon rubber
Rtv silicone rubber
hepl you reduce cost
improve efficency
increasing your reproduction time
free catalyst
RTV silicon rubber HY-620 details
RTV silicon rubber application
1.
RTV Silicon Rubber can used for
poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2.
RTV Silicon Rubber
is applicable for large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold,
3.
RTV Silicon Rubber is intend for
artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV silicon rubber HY-620 Standard Datasheet:
Model
Appearance
Viscosity (cs)
Hardness (A
0
)
Tensile Strength (kgf/)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio (%)
Operating Time(H)
Curing Time(H)
620
White
15000~17000
26~28
≥35
≥22
≥470
2~3
0.5
2~4
The proportions and reactions of the curing agent and the silicon rubber are listed as follows:
1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.
2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.
3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.
Any more information pls contact Ms shirley
mobile :86-15220170905
phone :86-755-89948006
hepl you reduce cost
improve efficency
increasing your reproduction time
free catalyst
RTV silicon rubber HY-620 details
RTV silicon rubber application
1.
RTV Silicon Rubber can used for
poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2.
RTV Silicon Rubber
is applicable for large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold,
3.
RTV Silicon Rubber is intend for
artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV silicon rubber HY-620 Standard Datasheet:
Model
Appearance
Viscosity (cs)
Hardness (A
0
)
Tensile Strength (kgf/)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio (%)
Operating Time(H)
Curing Time(H)
620
White
15000~17000
26~28
≥35
≥22
≥470
2~3
0.5
2~4
The proportions and reactions of the curing agent and the silicon rubber are listed as follows:
1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.
2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.
3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.
Any more information pls contact Ms shirley
mobile :86-15220170905
phone :86-755-89948006
RTV silicone adhesive for Connection box
HOPSON High Temperature Silicone Gasket Maker is non-slumping, one component and acidic-curing rubber.
Description:
HPOSON HP-1003 Single component RTV silicone adhesive
HP-1003 is single component neutral RTV silicone adhesive. It makes condensation reaction through the moisture in the air, produce low molecule and occur crosslinking, finally vulcanized into high performance elastomer. The solidified elastomer has good electrical performance: anti ageing, high and low temperature resistance, insulation, no swelling, and has good bonding ability to most metal and non-metal materials, and can use for the sealing of many kinds of electronic components and electronic products, no pollution to surrounding environment.
Application:
1.Cementing: for the elastic cementing of metal and non-metal materials, and has no corruption to the object. For the waterproofing and damproofing cementing of all kinds of underwater apparatus, and the elastic cementing of all kinds of electric appliance sensors.
2. Sealing: electric heating pipe end, chemical equipment, sight glass, electric appliance, small home appliance, power supplier, LED module, optical apparatus
3. Coating: insulation, damproofing, sock proofing and other protective functions of all kinds of electronic components, semiconductor materials and electric appliance.
First of all, clean the surface of the object, and then cut the muzzle, you may squeeze extrude the soft tube or install special injector. Seal the cap after use, please control the sealing thickness under 6mm, and avoid touch eyes while operating.
Feature:
Before vulcanization
Inspection item
Index
Exterior
Red, white, black, transparent, dope
Viscosity Pa.s
8(80)
Specific gravity
1.0~1.04
TFT min
5~30
After vulcanization
Hardness JISA
20~30
Elongation%
200~280
Tensile strength kg/cm2
2.0(20)
Volume resistivity Ω.cm
5(5*1014)
Strength of breakdown voltage kv/mm
20(20)
Dielectric constant 60Hz
2.5~3.8
Dielectric loss/60Hz
0.005
Thermal conductivity W/mk
0.21(5*10-14)
Packing and storage:
According to different demands of customers, we have different color packaging, the colors are: red, white, transparent, black, the packing: 45g, 100g soft tube, 300ml PE tube. This product is nontoxic non-dangerous cargo, please avoid rains and expose to sunlight, and preserve in shade (above 26°C) and keep it dry. The preserve period is 6 months.
Description:
HPOSON HP-1003 Single component RTV silicone adhesive
HP-1003 is single component neutral RTV silicone adhesive. It makes condensation reaction through the moisture in the air, produce low molecule and occur crosslinking, finally vulcanized into high performance elastomer. The solidified elastomer has good electrical performance: anti ageing, high and low temperature resistance, insulation, no swelling, and has good bonding ability to most metal and non-metal materials, and can use for the sealing of many kinds of electronic components and electronic products, no pollution to surrounding environment.
Application:
1.Cementing: for the elastic cementing of metal and non-metal materials, and has no corruption to the object. For the waterproofing and damproofing cementing of all kinds of underwater apparatus, and the elastic cementing of all kinds of electric appliance sensors.
2. Sealing: electric heating pipe end, chemical equipment, sight glass, electric appliance, small home appliance, power supplier, LED module, optical apparatus
3. Coating: insulation, damproofing, sock proofing and other protective functions of all kinds of electronic components, semiconductor materials and electric appliance.
First of all, clean the surface of the object, and then cut the muzzle, you may squeeze extrude the soft tube or install special injector. Seal the cap after use, please control the sealing thickness under 6mm, and avoid touch eyes while operating.
Feature:
Before vulcanization
Inspection item
Index
Exterior
Red, white, black, transparent, dope
Viscosity Pa.s
8(80)
Specific gravity
1.0~1.04
TFT min
5~30
After vulcanization
Hardness JISA
20~30
Elongation%
200~280
Tensile strength kg/cm2
2.0(20)
Volume resistivity Ω.cm
5(5*1014)
Strength of breakdown voltage kv/mm
20(20)
Dielectric constant 60Hz
2.5~3.8
Dielectric loss/60Hz
0.005
Thermal conductivity W/mk
0.21(5*10-14)
Packing and storage:
According to different demands of customers, we have different color packaging, the colors are: red, white, transparent, black, the packing: 45g, 100g soft tube, 300ml PE tube. This product is nontoxic non-dangerous cargo, please avoid rains and expose to sunlight, and preserve in shade (above 26°C) and keep it dry. The preserve period is 6 months.
RTV silicone adhesive
RTV silicone adhesive;
cure time;15-20 mins;
shelf time:12 month;
water-proof;
lead time:15 days
RTV silicone adhesive
Nature:
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation, resist from oil, water and transmission fluid, as well as cracking and migration caused by thermal cycling.
Usage:
Effect strong adhesion between hardware, plastic and other materials. Widely used in light industry, machinery, home decoration, electronic assents etc.
Direction:
1. Clean the surface of the objects to be glued thoroughly.
2. Remove cap, squeeze a suitable amount of this glue onto the surface.
3. Press the two surfaces with glue together.
Tech information:
Solidification: 3-15 minutes outer solidify, 3-5hours inner solidify.
Color: cream (703) or transparent (705).
Extension: 225%
Working temperature: -60ºC to 150ºC
Working voltage: 14KV/mm
Cutting strength: 14kg/Cm (703) 13kg/Cm (705)
cure time;15-20 mins;
shelf time:12 month;
water-proof;
lead time:15 days
RTV silicone adhesive
Nature:
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation, resist from oil, water and transmission fluid, as well as cracking and migration caused by thermal cycling.
Usage:
Effect strong adhesion between hardware, plastic and other materials. Widely used in light industry, machinery, home decoration, electronic assents etc.
Direction:
1. Clean the surface of the objects to be glued thoroughly.
2. Remove cap, squeeze a suitable amount of this glue onto the surface.
3. Press the two surfaces with glue together.
Tech information:
Solidification: 3-15 minutes outer solidify, 3-5hours inner solidify.
Color: cream (703) or transparent (705).
Extension: 225%
Working temperature: -60ºC to 150ºC
Working voltage: 14KV/mm
Cutting strength: 14kg/Cm (703) 13kg/Cm (705)
RTV silicone gasket maker grey MQ128
Hi-Temp RTV silicone gasket maker
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
Product Description and Applications:
Mengqi Model 128 High-Temperature red gasket maker is made according to features of the imported products. It can replace traditional cork pad, oily towel pad, paper pad, rubber blanket and asbestos pad and in particular apply to the static sealing of automotive, motors, vessels, machines, electronics, and chemical instruments. This product possesses excellent sealing property, high electrical insulation and ageing-resistant performance for gas, water and oil. It will not flow and corrode or contaminate the components and parts. This product is flexible and could be stored stable in cool and dry place.
Working Temperature: -60°C-280°C Pressurization: 10Mpa
Instruction for use:
1 Clean all the oil, water, rust, dust from the surfaces thoroughly.
2 remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size.
3 Apply continuous, uniform 1-4mm bead around perimeter of one surface. Completely surround all bolt holes.
4 Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5 Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Shelf time: 12 months Implementation Standard: Q/S FT JM02-2008
Net WT.: 100g
RTV silicone gasket maker
rtv silicone sealant maker
1. all Color
2.Remains flexible
3.Chemicals and fluids resistant
4.enter with more information
we had already exported our products for more than 20 years,as a special chinese supplier,we have all kinds of color of RTV silicone,our products can be equipted for transmission system, cooling system,engine system,suspension system, work temperature :from -40F to +650F,their surface dry time is within 15 minutes.
our normal delivery time is within 30 days upon confirming the order.
pls kindly contact us if you wish to know more information.
1. all Color
2.Remains flexible
3.Chemicals and fluids resistant
4.enter with more information
we had already exported our products for more than 20 years,as a special chinese supplier,we have all kinds of color of RTV silicone,our products can be equipted for transmission system, cooling system,engine system,suspension system, work temperature :from -40F to +650F,their surface dry time is within 15 minutes.
our normal delivery time is within 30 days upon confirming the order.
pls kindly contact us if you wish to know more information.
4 Not contain styrene and non-toxic Epoxy Resin waterproof adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
RTV silicone glass sealant
silicone sealant resistant to water, weather, ozone, ultraviolet
Property:
Acid & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction:
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.
Use:
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction:
~ Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
~ Make sure fill the interface with it and tightly stick to the base material .
~ Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard:
GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification:
245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
Optional Color:
Black, white, transparent, grey or on requested.
Testing Standard:
GB/T14683-2003 Silicone Building Sealant
Property:
Acid & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction:
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.
Use:
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction:
~ Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
~ Make sure fill the interface with it and tightly stick to the base material .
~ Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard:
GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification:
245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
Optional Color:
Black, white, transparent, grey or on requested.
Testing Standard:
GB/T14683-2003 Silicone Building Sealant
RTV silicone sealant for industry
we have developed Electronic Silicone, Silicone Sealant, acetoxy cure silicone sealant, neuter cure weatherproof silicone sealan
Main Products
we have developed Electronic Silicone, Silicone Sealant, acetoxy cure silicone sealant, neuter cure weatherproof silicone sealant, single and doulble-component structural silicone sealant, multi-purpose contact adhesive, insulation glass silicone sealant, stone silicone sealant, and high-temp silicone gasket maker etc.
silicone sealing adhesive which can be cured in room temperature. Adhesive to different material without bottom coating, it mixes with Moisture and becomes a kind of elastic silicone rubber. It has good features of non-corrosion to most metal, thermal cycle resistance, aging resistance, electrical insulation, anti-seismic, corona-resistance, leakage-resistance and chemical resistance.
This product is especially applicable in improving Adhesive between plastic products and metal, glass, plastic, wood board, aluminum panel, circuit board and cardboard with any handling for the cured silicone rubber. It is capable of operating in -50-250C condition for 1h and can be cured within 24h mixed with moisture, which totally abbeys the ROHS order of European Union.
typical use
1:
moisture-proof and water proof package for electronic equipments and fittings.
2:sealing for Adhesive parts.
3:
fixation and electrical insulation of electronic fittings
4:sealing for Washers of Car headlamp
5:adhesive and sealing of some other metal and plastic.
6:
adhesive and sealing of fridge, microwave oven , breadboard electronic element, solar energy equipment and machines.
Main Products
we have developed Electronic Silicone, Silicone Sealant, acetoxy cure silicone sealant, neuter cure weatherproof silicone sealant, single and doulble-component structural silicone sealant, multi-purpose contact adhesive, insulation glass silicone sealant, stone silicone sealant, and high-temp silicone gasket maker etc.
silicone sealing adhesive which can be cured in room temperature. Adhesive to different material without bottom coating, it mixes with Moisture and becomes a kind of elastic silicone rubber. It has good features of non-corrosion to most metal, thermal cycle resistance, aging resistance, electrical insulation, anti-seismic, corona-resistance, leakage-resistance and chemical resistance.
This product is especially applicable in improving Adhesive between plastic products and metal, glass, plastic, wood board, aluminum panel, circuit board and cardboard with any handling for the cured silicone rubber. It is capable of operating in -50-250C condition for 1h and can be cured within 24h mixed with moisture, which totally abbeys the ROHS order of European Union.
typical use
1:
moisture-proof and water proof package for electronic equipments and fittings.
2:sealing for Adhesive parts.
3:
fixation and electrical insulation of electronic fittings
4:sealing for Washers of Car headlamp
5:adhesive and sealing of some other metal and plastic.
6:
adhesive and sealing of fridge, microwave oven , breadboard electronic element, solar energy equipment and machines.
RTV silicone sealant(adhesive), industrial silicone sealant
silicone sealant for industry such as electronic, LED, LCD and so on
OPT315W
two-component silicone pouring sealant
Product information
OPT315W
is
a kind of two-component
condensation type room temperature curing silicone sealing adhesive. Ethanol which is absorbed during curing is non-corrosion to PC PP, ABS, PVC and copper. It has good adhesion to most of electronic fittings (except for PP, PE).
Product features
1. Potting and protection of outdoor LED screen and electronic equipment module
2. Rubber after curing with elasticity and shock resistance
3. Heat resistance, moisture-proof and freeze resistance which) prolong the life of electronic fittings.
4. Ethanol is absorbed and non-corrosion to equipments during the process of curing
5. Primer is unnecessary with strong adhesive to PC(Polycarbonate),Epoxy material.
6. IP65 water proof grade.
Use
Potting of electronic equipment and module
Technical parameter
performance index
OPT315W A component
OPT315W B component
Before curing
appearance
white fluid
transparent fluid
viscosity(cps)
3500~5000
20~130
relativity density(g/cm
3
)
0.98~1.12
0.98~1.02
A:B(weight ratio)
10:1
cured type
Two-component condensation dealcoholization type
viscosity after curing((cps)
2000~3000
operating time(min)
40~90
surface curing time(hr)
2~24
cured time (hr)
24
After curing
hardness (Shore A,24hr)
25-30
tensile strength(kgf/cm2)
1.8
shear strength(MPa)
1.00
linear shrinkage (%)
0.3
temperature scope (°C)
-60~250
volume resistivity (Ω·cm)
1.0×10
15
dielectric strength (kV/·mm)
≥25
dielectric constant (1.2MHz)
2.9
thermal conductivity[W/(m·K)]
0.35
application scope
potting of module
biggest feature
fluid, deep curing
Note: viscosity, color and curing time can be adjusted according to your requisition
Using method and note
1. Stirring the A adhesive by hand or with machine before using and stir the B adhesive in an airproof container. Repack the left adhesive.
2. Ensure the material can be adhesive before use.
3. Mixed the adhesive in weight ratio: A:B = 10:1. Generally, more B component requires longer curing time.
4. Mix the adhesive in the airproof container for 5 min, deaeration under 700mmHg.
5. It will be cured with shorter time in higher temperature but heated-curing is not suggested.
Storage and transportation
1. The product should be stored under cool, dry condition and the shelf-life can be 9 months under 25°C.
2. These products don’t belong to dangerous goods, so they can be transported as normal chemicals.
3. Seal the mixture to avoid Leakage.
4. Products past deadline must be confirmed before use.
OPT315W
two-component silicone pouring sealant
Product information
OPT315W
is
a kind of two-component
condensation type room temperature curing silicone sealing adhesive. Ethanol which is absorbed during curing is non-corrosion to PC PP, ABS, PVC and copper. It has good adhesion to most of electronic fittings (except for PP, PE).
Product features
1. Potting and protection of outdoor LED screen and electronic equipment module
2. Rubber after curing with elasticity and shock resistance
3. Heat resistance, moisture-proof and freeze resistance which) prolong the life of electronic fittings.
4. Ethanol is absorbed and non-corrosion to equipments during the process of curing
5. Primer is unnecessary with strong adhesive to PC(Polycarbonate),Epoxy material.
6. IP65 water proof grade.
Use
Potting of electronic equipment and module
Technical parameter
performance index
OPT315W A component
OPT315W B component
Before curing
appearance
white fluid
transparent fluid
viscosity(cps)
3500~5000
20~130
relativity density(g/cm
3
)
0.98~1.12
0.98~1.02
A:B(weight ratio)
10:1
cured type
Two-component condensation dealcoholization type
viscosity after curing((cps)
2000~3000
operating time(min)
40~90
surface curing time(hr)
2~24
cured time (hr)
24
After curing
hardness (Shore A,24hr)
25-30
tensile strength(kgf/cm2)
1.8
shear strength(MPa)
1.00
linear shrinkage (%)
0.3
temperature scope (°C)
-60~250
volume resistivity (Ω·cm)
1.0×10
15
dielectric strength (kV/·mm)
≥25
dielectric constant (1.2MHz)
2.9
thermal conductivity[W/(m·K)]
0.35
application scope
potting of module
biggest feature
fluid, deep curing
Note: viscosity, color and curing time can be adjusted according to your requisition
Using method and note
1. Stirring the A adhesive by hand or with machine before using and stir the B adhesive in an airproof container. Repack the left adhesive.
2. Ensure the material can be adhesive before use.
3. Mixed the adhesive in weight ratio: A:B = 10:1. Generally, more B component requires longer curing time.
4. Mix the adhesive in the airproof container for 5 min, deaeration under 700mmHg.
5. It will be cured with shorter time in higher temperature but heated-curing is not suggested.
Storage and transportation
1. The product should be stored under cool, dry condition and the shelf-life can be 9 months under 25°C.
2. These products don’t belong to dangerous goods, so they can be transported as normal chemicals.
3. Seal the mixture to avoid Leakage.
4. Products past deadline must be confirmed before use.
RTV silicone sealant
single component;
fast curing speed;
waterproof and outstanding weather resistant ;
excellent adhesive to most common materia
CHARACTERISTICS
KEYE139 Acetic Silicone Sealant is in single component, acid, room curing, fast curing speed, large binding power, having excellent
ageing-resistant performance and excellent adhesive to most common building material. Which has little changes of performance at -40~150°C.
APPLICATION
Using in different kinds of engineering
Joint sealing to glass, marble and all kinds of glass door and window
Fit up automotive, ship, packaging advertisement and family decoration.
Use Method
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.
STORGE
Keep in cool and dry condition. .About the date of production and storage life please read the coding
WARNI NG
Please keep away from reach of children. In case of eyes and skins contact, wash with plenty of water, if hurt badly should ask the doctor for help.
fast curing speed;
waterproof and outstanding weather resistant ;
excellent adhesive to most common materia
CHARACTERISTICS
KEYE139 Acetic Silicone Sealant is in single component, acid, room curing, fast curing speed, large binding power, having excellent
ageing-resistant performance and excellent adhesive to most common building material. Which has little changes of performance at -40~150°C.
APPLICATION
Using in different kinds of engineering
Joint sealing to glass, marble and all kinds of glass door and window
Fit up automotive, ship, packaging advertisement and family decoration.
Use Method
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.
STORGE
Keep in cool and dry condition. .About the date of production and storage life please read the coding
WARNI NG
Please keep away from reach of children. In case of eyes and skins contact, wash with plenty of water, if hurt badly should ask the doctor for help.
RTV silicone sealant
silicon rubber
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation
Silicon rubber
Nature:
Unitary component, good function, solidify under room temperature, high strength, convenient usage.
Usage:
It is mainly used for adhering artificial nail.
Directions:
1.Remove colloid solution on artificial nail surface.
2.Squeeze a suitable amount of this glue onto the nail surface, press the two surfaces with glue together ,
Storage:
1.Storage circumstance: cool, dark and dry environment
2.Storage period: 5 months in airtight storage
Technique info:
Exterior: transparent liquid
Viscosity: 50mpa.s
Solidify time : 15S
Anti-cut strengh : 10mpa
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2 Strong smell when volatilize make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation
Silicon rubber
Nature:
Unitary component, good function, solidify under room temperature, high strength, convenient usage.
Usage:
It is mainly used for adhering artificial nail.
Directions:
1.Remove colloid solution on artificial nail surface.
2.Squeeze a suitable amount of this glue onto the nail surface, press the two surfaces with glue together ,
Storage:
1.Storage circumstance: cool, dark and dry environment
2.Storage period: 5 months in airtight storage
Technique info:
Exterior: transparent liquid
Viscosity: 50mpa.s
Solidify time : 15S
Anti-cut strengh : 10mpa
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2 Strong smell when volatilize make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.
RTV silicone sealant
it's neutral, gasket free, high-temperature resistance (RTV silicone sealant, RTV silicone gasket maker, gasket sealant)
RTV Silicone Gasket Maker
Main Application
This can replace various rubber mats, asbestos mats,
mats
and
cardboard
mattress, etc.
It can be for
cars,
motorcycles
and machinery
and equipment
engines,
gear boxes and
other
parts of axle flange
interface
sealing,
without
restrictions
of size
and shape of
combined
interface,
its
widely used for
sealing
and
leakage
proof of various parts
of
machinery
(seal
clearance ≥6mm).
Single component
RTV .
High-temperature resistant
Oil resistant
Less shrinkage after cured
Dual function of bonding and sealing
.
.
Item
Black
Blue
Red
Silver
Performance
Typical Application
For flat sealing of engine,gear box,transmission case of motorcycle etc various mechanism equipment
Color
Black
Blue
Red
Silver
Surface Dry Time(minute)
≤20
≤10
Complete Cure Time
24 h
Tensile Strength
≥1.2Mpa
Percentage of Breaking-Elongation
≥300%
Package
55g/tube;
300ml/cartridge
55g/tube; 85g/tube
300ml/cartridge
55g/tube;
300ml/cartridge
RTV silicon sealant, RTV silicone gasket maker, silicone gasket sealant. RTV silicon gasketing sealant...
RTV Silicone Gasket Maker
Main Application
This can replace various rubber mats, asbestos mats,
mats
and
cardboard
mattress, etc.
It can be for
cars,
motorcycles
and machinery
and equipment
engines,
gear boxes and
other
parts of axle flange
interface
sealing,
without
restrictions
of size
and shape of
combined
interface,
its
widely used for
sealing
and
leakage
proof of various parts
of
machinery
(seal
clearance ≥6mm).
Single component
RTV .
High-temperature resistant
Oil resistant
Less shrinkage after cured
Dual function of bonding and sealing
.
.
Item
Black
Blue
Red
Silver
Performance
Typical Application
For flat sealing of engine,gear box,transmission case of motorcycle etc various mechanism equipment
Color
Black
Blue
Red
Silver
Surface Dry Time(minute)
≤20
≤10
Complete Cure Time
24 h
Tensile Strength
≥1.2Mpa
Percentage of Breaking-Elongation
≥300%
Package
55g/tube;
300ml/cartridge
55g/tube; 85g/tube
300ml/cartridge
55g/tube;
300ml/cartridge
RTV silicon sealant, RTV silicone gasket maker, silicone gasket sealant. RTV silicon gasketing sealant...
RTV silicone sealant
high temperature resistant.Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
RTV Silicone gasket maker is a smooth, thick purple paste.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Note: Do not use for parts that are continuously immersed in gasoline
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use
Irritant: Contains methylacrylate esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
Item No. Performance
FO-1592
FO-1592x32(g)
FO-1593
FO-1596
FO-1597
FO-1598
FO-1599
Typical Purpose
Ideally suited for intake and exhaust,manifolds,headeer,thermostat housing,etc
Color
Transparent
Transparent
White
Red
Blue
Black
Grey
Operating Temp(c + )
-54/260
-54/260
-54/300
-54/343
-54/260
-54/343
-54/300
Curing Time(primary cure/complete cure)
Seals timely/24h
Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
RTV Silicone gasket maker is a smooth, thick purple paste.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Note: Do not use for parts that are continuously immersed in gasoline
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use
Irritant: Contains methylacrylate esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
Item No. Performance
FO-1592
FO-1592x32(g)
FO-1593
FO-1596
FO-1597
FO-1598
FO-1599
Typical Purpose
Ideally suited for intake and exhaust,manifolds,headeer,thermostat housing,etc
Color
Transparent
Transparent
White
Red
Blue
Black
Grey
Operating Temp(c + )
-54/260
-54/260
-54/300
-54/343
-54/260
-54/343
-54/300
Curing Time(primary cure/complete cure)
Seals timely/24h
RTV silicone sealant
RTV silicone gasket maker is single-component,
non-slumping that curesto a permanently flexible
silicone rubber on exposur
RTV silicone gasket maker is single-component,
non-slumping that curesto a permanently flexible
silicone rubber on exposure to atmospheric moistureat room temperature.
Application:drive housings, exhaust manifolds, thermostat housings,
valve covers, water pumps !
non-slumping that curesto a permanently flexible
silicone rubber on exposur
RTV silicone gasket maker is single-component,
non-slumping that curesto a permanently flexible
silicone rubber on exposure to atmospheric moistureat room temperature.
Application:drive housings, exhaust manifolds, thermostat housings,
valve covers, water pumps !
RTV silicone sealant
silicon rubber
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation
Silicon rubber
Nature:
Unitary component, good function, solidify under room temperature, high strength, convenient usage.
Usage:
It is mainly used for adhering artificial nail.
Directions:
1.Remove colloid solution on artificial nail surface.
2.Squeeze a suitable amount of this glue onto the nail surface, press the two surfaces with glue together ,
Storage:
1.Storage circumstance: cool, dark and dry environment
2.Storage period: 5 months in airtight storage
Technique info:
Exterior: transparent liquid
Viscosity: 50mpa.s
Solidify time : 15S
Anti-cut strengh : 10mpa
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2 Strong smell when volatilize make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.
Unitary component, stable and long-lasting function, non-toxic, non-sniffable, anti-corrosion, anti-condensation
Silicon rubber
Nature:
Unitary component, good function, solidify under room temperature, high strength, convenient usage.
Usage:
It is mainly used for adhering artificial nail.
Directions:
1.Remove colloid solution on artificial nail surface.
2.Squeeze a suitable amount of this glue onto the nail surface, press the two surfaces with glue together ,
Storage:
1.Storage circumstance: cool, dark and dry environment
2.Storage period: 5 months in airtight storage
Technique info:
Exterior: transparent liquid
Viscosity: 50mpa.s
Solidify time : 15S
Anti-cut strengh : 10mpa
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2 Strong smell when volatilize make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.
RTV weatherproof silicone sealant
Neutral solidified silicone sealant; weather resistant; ultraviolet resistant; ozone resistant; water resistant;
Property
Neutral solidified;
weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40°C.
Use
1. weathering cementation & seal of various glass curtain walls
2. weathering cementation & seal of aluminum plates and enamel curtain walls
3. cementation & seal of aluminum, glass, etc.
4. seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
5. good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Testing Standard: JC/T882-2001 Silicone Building Sealant
No.
Item
Standard
Result
Single Judgment
1
Appearance
Exquisite; even paste; no bubble, crust or gel
Accordant
Eligible
2
Droop (N type), mm
Vertical
≤3
1.0
Eligible
Horizontal
No Deformation
No Deformation
3
Extrusion, mL/min
≥80
140.5
Eligible
4
Surface Dry Time, h
≤3
0.7
Eligible
5
MPa Tensile Modulus, MPa
23
>0.4
or
>0.6
0.7
Eligible
-20
/
6
Modulus Cohesive Property
No Destruction
No Destruction
Eligible
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: JC/T882-2001
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25°C to prolong its service life; 12 months guarantee
Packing Specification:
245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card;
Optional Color:
Transparent, silver-grey, black and white
Property
Neutral solidified;
weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant
Service Restriction
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40°C.
Use
1. weathering cementation & seal of various glass curtain walls
2. weathering cementation & seal of aluminum plates and enamel curtain walls
3. cementation & seal of aluminum, glass, etc.
4. seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
5. good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Testing Standard: JC/T882-2001 Silicone Building Sealant
No.
Item
Standard
Result
Single Judgment
1
Appearance
Exquisite; even paste; no bubble, crust or gel
Accordant
Eligible
2
Droop (N type), mm
Vertical
≤3
1.0
Eligible
Horizontal
No Deformation
No Deformation
3
Extrusion, mL/min
≥80
140.5
Eligible
4
Surface Dry Time, h
≤3
0.7
Eligible
5
MPa Tensile Modulus, MPa
23
>0.4
or
>0.6
0.7
Eligible
-20
/
6
Modulus Cohesive Property
No Destruction
No Destruction
Eligible
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: JC/T882-2001
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25°C to prolong its service life; 12 months guarantee
Packing Specification:
245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card;
Optional Color:
Transparent, silver-grey, black and white
4 carbon fiber fabric
1 carbon fiber fabric is a unidirectional
2 resist tensile, shear and seismic reinformance
3 character constancy.durability
Carbon fiber fabric is a unidirectional and compiled structural reinforcement material,
tha characters: resist tensile, shear and seismic reinforcement .applying to reinforcement of building
bridges, piers, bridges, tunnels, chimney, column and beam structure and so on.
Name
Carbon fiber fabric (1 grade)
Carbon plate (1 grade)
Tensile ( MPa )
≥3539
≥2400
Elastic modulus (MPa )
≥2.4*105
≥ 160000
Elongation %
≥1.7
≥1.7
Flexural strength (MPa )
≥718
Shear (MPa )
≥45
Weight g/m2
200
300
Thickness mm
0.111
0.167
1.1/1.2/1.3/1.4/1.5
Width cm
20/30/50
50/60/80/100
2 resist tensile, shear and seismic reinformance
3 character constancy.durability
Carbon fiber fabric is a unidirectional and compiled structural reinforcement material,
tha characters: resist tensile, shear and seismic reinforcement .applying to reinforcement of building
bridges, piers, bridges, tunnels, chimney, column and beam structure and so on.
Name
Carbon fiber fabric (1 grade)
Carbon plate (1 grade)
Tensile ( MPa )
≥3539
≥2400
Elastic modulus (MPa )
≥2.4*105
≥ 160000
Elongation %
≥1.7
≥1.7
Flexural strength (MPa )
≥718
Shear (MPa )
≥45
Weight g/m2
200
300
Thickness mm
0.111
0.167
1.1/1.2/1.3/1.4/1.5
Width cm
20/30/50
50/60/80/100
RTV-1 Concrete Exterior Wall Gap-Filling Silicone adhesive
Exterior Wall Gap-Filling Silicone Adhesive for
Exterior wall gap-filling and waterproofing, concrete, tiles and joint sealing
1.Characteristics:
JH-338 belongs to
RTV-1
silicone adhesive
, expediently application between 5~40°C
Neutral curing, non-corrosive to marble (granite), aluminum, coated glass, metal ect.;
Quickly speed of curing, excellent adhesion, middle , excellent movement capability;
Excellent resistance to weather, the service life is over 50 years in the condition of general weather;
Excellent resistance to low and high temperature change. Little changes of performance at -40°C ~150°C;
Excellent
adhesive
to most of building materials without priming
Good compatibility with other neutral
silicone adhesive
;
2.Purpose:
For exterior wall gap-filling and waterproofing sealing;
For fitment filling;
Many other building & Industrial uses.
3.Typical Technology Data:
Performance
Standard
JC/T 882-2001
Measured Value
Testing method
Slumpability (mm)
≤3
0
GB/T 13477
Extrusion (ml/min)
≥80
289
Tack-Free Time (min)
≤180
90
Hardness (HsA)
/
49
GB/T 531
Loss of Heating %
≤10
4.2
ASTMC 792
Tensile strength in adhesion (Mpa)
≥0.4
0.808
GB/T 13477
Elongation at ultimate strength %
/
153
Permanent set adhesion
Non destroyed
Non destroyed
Movement Capability %
±20
±20
ASTMC 719
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.
4.Application Standard:
Standard JC/T 881-2001 Concrete Building usage
silicone sealant
5.Restriction of Usage
Cant be used as structural
adhesive;
Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the
adhesive
;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place
Cannot be used the product, if the temperature is below 4°C or above 40°C on the surface of the materials.
6.Color and Package:
Color: Black, Gray, White, or other colors on request to JH-338
Package: JH-338: 310ml Cartridge net 300ml,
7. Joint Design and Working Procedure:
Please refer to Section The Technology Instruction of Jianhua
Silicone sealant
8. Technical Service
Offer the integral technical data of the product
9. Maintenance:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC
Project photos
Exterior wall gap-filling and waterproofing, concrete, tiles and joint sealing
1.Characteristics:
JH-338 belongs to
RTV-1
silicone adhesive
, expediently application between 5~40°C
Neutral curing, non-corrosive to marble (granite), aluminum, coated glass, metal ect.;
Quickly speed of curing, excellent adhesion, middle , excellent movement capability;
Excellent resistance to weather, the service life is over 50 years in the condition of general weather;
Excellent resistance to low and high temperature change. Little changes of performance at -40°C ~150°C;
Excellent
adhesive
to most of building materials without priming
Good compatibility with other neutral
silicone adhesive
;
2.Purpose:
For exterior wall gap-filling and waterproofing sealing;
For fitment filling;
Many other building & Industrial uses.
3.Typical Technology Data:
Performance
Standard
JC/T 882-2001
Measured Value
Testing method
Slumpability (mm)
≤3
0
GB/T 13477
Extrusion (ml/min)
≥80
289
Tack-Free Time (min)
≤180
90
Hardness (HsA)
/
49
GB/T 531
Loss of Heating %
≤10
4.2
ASTMC 792
Tensile strength in adhesion (Mpa)
≥0.4
0.808
GB/T 13477
Elongation at ultimate strength %
/
153
Permanent set adhesion
Non destroyed
Non destroyed
Movement Capability %
±20
±20
ASTMC 719
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.
4.Application Standard:
Standard JC/T 881-2001 Concrete Building usage
silicone sealant
5.Restriction of Usage
Cant be used as structural
adhesive;
Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the
adhesive
;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place
Cannot be used the product, if the temperature is below 4°C or above 40°C on the surface of the materials.
6.Color and Package:
Color: Black, Gray, White, or other colors on request to JH-338
Package: JH-338: 310ml Cartridge net 300ml,
7. Joint Design and Working Procedure:
Please refer to Section The Technology Instruction of Jianhua
Silicone sealant
8. Technical Service
Offer the integral technical data of the product
9. Maintenance:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC
Project photos
RTV-1 silicone sealant for Aluminum-Plastic composite plate curtain wall sealing
1)Suitable for weather sealing in aluminum-plastic composite plate curtain wall ,metal;
2)Monocomponent;
3)High adhension
QIAN LI MA® JH-3680
Silicone Weather Resistance Sealant
1.Characteristics:
JH-3680 Belongs to RTV-1, expediently application between 4-40c alcoxy curing system,expediently application between 5-50c to oxmie curing system.
Neutral curing,non-corrosive to glass,coated glass,concrete,marble,metal(not including oxime curing system)and most kinds of plastic etc
Quick speed of curing,excellent adhesion,middle modulus,exellent movement capability
Excellent resistance to weather,the service life is over 50 years in the condition of general weather
Excellent resistance to low and high temperature change. Little changes of performance at -40~150°C;
Excellent adhesive to aluminum panel,aluminum plastic panel and other building materials
Good compatibility with other neutral silicone sealants;
Good compatibility with other neutral silicone sealants
2.Purpose:
For weather sealing in all type alum,curtain wall joints and aluminum-plastics composite plate curtain wall joints
For weather sealing in metal,plastic and concrete
Sealing in roof joints of constructions
Many other building&Industrial uses
3.Typical Technology Data:
Performance
Standard JC/T882-2001
Measured Value
Testing method
Alcoxy
Oxime
Slumpability (mm)
≤3
0
1
GB/T 13477
Extrusion (S)
≥80
130.9
145
Tack-Free Time (min)
≤180
70
90
Hardness (HsA)
/
51
46
GB/T 531
Loss of Heating %
≤10
3.3
3.8
ASTMC 792
Tensile strength in adhesion(Mpa)
>0.4(high modulus)
1.0
0.83
GB/T 13477
Permanent set adhesion
Non destroyed
Non destroyed
Non destroyed
Movement Capability
+20
+20
+20
ASTMC719
Elongation at ultimate strength %
/
250
260
GB/T 13477
Stability
Store for 12 months at –20~27°C in cool, dry place after date of manufacture
4.Application Standard:
Standard JC/T 882-2001 Curtain wall sealing silicone sealant
5.Restriction of Usage:
Can't be used as structural sealant
Unsuitable for the surface of all kinds of material that can effuse grease,plasticizer or solvent
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place;
Can’t be used the product of alcoxy ,if the temperature is below 4°C or above 40°C on the surface of the material.Can't be used the product of oxime,if the temperature is below 5°C or above 50°C on the surface of the material
6.Color and Package:
Color:Back,Gray,White or other color on request to JH-3680
Package: 310ml Cartridge net 300ml, 590ml ham bag
7. Joint Design and Working Procedure:
Please refer to Section “The Technology Instruction of Jianhua Silicone structural sealant”
8. Technical Service
Offer the integral technical data of the products.
9. Others:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC
Project photos
2)Monocomponent;
3)High adhension
QIAN LI MA® JH-3680
Silicone Weather Resistance Sealant
1.Characteristics:
JH-3680 Belongs to RTV-1, expediently application between 4-40c alcoxy curing system,expediently application between 5-50c to oxmie curing system.
Neutral curing,non-corrosive to glass,coated glass,concrete,marble,metal(not including oxime curing system)and most kinds of plastic etc
Quick speed of curing,excellent adhesion,middle modulus,exellent movement capability
Excellent resistance to weather,the service life is over 50 years in the condition of general weather
Excellent resistance to low and high temperature change. Little changes of performance at -40~150°C;
Excellent adhesive to aluminum panel,aluminum plastic panel and other building materials
Good compatibility with other neutral silicone sealants;
Good compatibility with other neutral silicone sealants
2.Purpose:
For weather sealing in all type alum,curtain wall joints and aluminum-plastics composite plate curtain wall joints
For weather sealing in metal,plastic and concrete
Sealing in roof joints of constructions
Many other building&Industrial uses
3.Typical Technology Data:
Performance
Standard JC/T882-2001
Measured Value
Testing method
Alcoxy
Oxime
Slumpability (mm)
≤3
0
1
GB/T 13477
Extrusion (S)
≥80
130.9
145
Tack-Free Time (min)
≤180
70
90
Hardness (HsA)
/
51
46
GB/T 531
Loss of Heating %
≤10
3.3
3.8
ASTMC 792
Tensile strength in adhesion(Mpa)
>0.4(high modulus)
1.0
0.83
GB/T 13477
Permanent set adhesion
Non destroyed
Non destroyed
Non destroyed
Movement Capability
+20
+20
+20
ASTMC719
Elongation at ultimate strength %
/
250
260
GB/T 13477
Stability
Store for 12 months at –20~27°C in cool, dry place after date of manufacture
4.Application Standard:
Standard JC/T 882-2001 Curtain wall sealing silicone sealant
5.Restriction of Usage:
Can't be used as structural sealant
Unsuitable for the surface of all kinds of material that can effuse grease,plasticizer or solvent
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place;
Can’t be used the product of alcoxy ,if the temperature is below 4°C or above 40°C on the surface of the material.Can't be used the product of oxime,if the temperature is below 5°C or above 50°C on the surface of the material
6.Color and Package:
Color:Back,Gray,White or other color on request to JH-3680
Package: 310ml Cartridge net 300ml, 590ml ham bag
7. Joint Design and Working Procedure:
Please refer to Section “The Technology Instruction of Jianhua Silicone structural sealant”
8. Technical Service
Offer the integral technical data of the products.
9. Others:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC
Project photos
RTV-2 electrical electronic silicone potting casting compounds sealant
RTV-2 electrical electronic silicone potting casting compounds sealant
RTV-2 electrical electronic silicone potting casting compounds sealant
SFY-131
is a two-part with good flow ability addition curing RTV silicone rubber. It is mainly designed for electrical and electronic potting, such as power supplies, connector, sensor, relay, high voltage resistor pack, and LED pottings. It is suitable for batch processing or automated dispensing. With different colors for better distinction, SFY-131A and SFY-131B are black and white, respectively. It can be cured in a 1:1 ratio by weight or volume either at room temperature or elevated temperature for faster processing. The cured mixture is a black flexible elastomer. The elastomer has excellence in electrical properties and waterproof, fire resistance and weather resistance. Those properties are not significantly affected by the changes of temperature. It does not contain hazardous substances in the candidate lists of Restriction of Hazardous Substances (RoHs) and 16 Substances of Very High Concern (SVHC) for green environmental protection.
Features
No corrosive and no cure by-product.
Equal amount of mixing ratio, good fluidity, easy processing.
Easy distinction of the two parts and inspection of complete mixing.
No significant exotherm or shrinkage during curing.
Flexible curing schedule, can be cured at room temperature (R.T.) or at elevated temperature.
Very stable to changes of temperature, stability over wide temperature range (-50 to 200
o
C).
Good fire resistance meets the level of UL94V0.
Excellent dielectric properties for maintaining and protection of existing electrical insulation requirements.
Excellent weather resistance and waterproof property for protection from moisture and dust contamination.
Relative easier removal benefits to repair of electrical/electronic devices.
Green environmental protection materials.
Characteristics
SFY-131A (BK, GY)
SFY-131B
Appearance
Black or Gray Liquid
Cream white Liquid
Specific Gravity (25
o
C)
1.30
1.30
Viscosity (cps, 25
o
C)
6,000
5,000
Mixing Ratio
1 1
Pot life (25
o
C, 100g)
60 min
Cure Condition (100 g)
150
o
C- 10 min
80
o
C- 30 min
RT- 24 hrs
Shrinkage (%)
0.2
Hardness (Shore A)
50
Water Absorption (24hrs, %)
< 0.05
Tensile strength (psi)
220
Elongation (%)
125
Thermal conductivity (W/mK)
0.4
Linear coefficient of thermal expansion (cm/cm
o
C) (5-150
o
C)
2.0 x 10
-4
RTV-2 electrical electronic silicone potting casting compounds sealant
SFY-131
is a two-part with good flow ability addition curing RTV silicone rubber. It is mainly designed for electrical and electronic potting, such as power supplies, connector, sensor, relay, high voltage resistor pack, and LED pottings. It is suitable for batch processing or automated dispensing. With different colors for better distinction, SFY-131A and SFY-131B are black and white, respectively. It can be cured in a 1:1 ratio by weight or volume either at room temperature or elevated temperature for faster processing. The cured mixture is a black flexible elastomer. The elastomer has excellence in electrical properties and waterproof, fire resistance and weather resistance. Those properties are not significantly affected by the changes of temperature. It does not contain hazardous substances in the candidate lists of Restriction of Hazardous Substances (RoHs) and 16 Substances of Very High Concern (SVHC) for green environmental protection.
Features
No corrosive and no cure by-product.
Equal amount of mixing ratio, good fluidity, easy processing.
Easy distinction of the two parts and inspection of complete mixing.
No significant exotherm or shrinkage during curing.
Flexible curing schedule, can be cured at room temperature (R.T.) or at elevated temperature.
Very stable to changes of temperature, stability over wide temperature range (-50 to 200
o
C).
Good fire resistance meets the level of UL94V0.
Excellent dielectric properties for maintaining and protection of existing electrical insulation requirements.
Excellent weather resistance and waterproof property for protection from moisture and dust contamination.
Relative easier removal benefits to repair of electrical/electronic devices.
Green environmental protection materials.
Characteristics
SFY-131A (BK, GY)
SFY-131B
Appearance
Black or Gray Liquid
Cream white Liquid
Specific Gravity (25
o
C)
1.30
1.30
Viscosity (cps, 25
o
C)
6,000
5,000
Mixing Ratio
1 1
Pot life (25
o
C, 100g)
60 min
Cure Condition (100 g)
150
o
C- 10 min
80
o
C- 30 min
RT- 24 hrs
Shrinkage (%)
0.2
Hardness (Shore A)
50
Water Absorption (24hrs, %)
< 0.05
Tensile strength (psi)
220
Elongation (%)
125
Thermal conductivity (W/mK)
0.4
Linear coefficient of thermal expansion (cm/cm
o
C) (5-150
o
C)
2.0 x 10
-4
RTV-2 electrical electronic silicone potting casting sealant rubber
1) Electronic silicone
2) safe electrical performance
3) good heat resistance
4) accept sample orders
RTV-2 electrical electronic silicone potting casting sealant rubber
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
2) safe electrical performance
3) good heat resistance
4) accept sample orders
RTV-2 electrical electronic silicone potting casting sealant rubber
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
RTV-2 liquid silicone electrical potting adhesive glue sealant
1) Liquid silicone
2) safe electrical performance
3) good heat resistance
4) accept sample orders
RTV-2 liquid silicone electrical potting adhesive glue sealant
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
2) safe electrical performance
3) good heat resistance
4) accept sample orders
RTV-2 liquid silicone electrical potting adhesive glue sealant
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1
USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)
RTV-T
RTV-T
1) Flame retardant , Non-corrosion to metals
2) Low volatility, Fast cure
3) Low odor cure for rtv silicone
RTV-T
GENERAL INSTRUCTIONS AND PRECAUTIONS
Avoid getting uncured material in the eyes, take eye protection at all times when working with this product.
Extended contact with the skin can cause irritation and should be avoided.
Wear protective gloves when working with this product.
Maintain good ventilation in the workplace at all times
Note
1, we produce the electronica potting adhesive series products, environmental temperature on A and B component mixed reaction speed influence.
2, in order to solve the defoaming and leakage, mixture suitable period and the production efficiency, the conflict can be adjusted according to the specific circumstances of A and B component proportion, A: B in 100:3 ~ 7 between belong to the normal range, the matching changes of solidified products of electrical performance, weatherproof and transparency of the impact is not big, only for curing the elastic mould product has A certain impact.
STORAGE
Store in a dry, cool place away from direct sunlight Optimal Storage: 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
1) Flame retardant , Non-corrosion to metals
2) Low volatility, Fast cure
3) Low odor cure for rtv silicone
RTV-T
GENERAL INSTRUCTIONS AND PRECAUTIONS
Avoid getting uncured material in the eyes, take eye protection at all times when working with this product.
Extended contact with the skin can cause irritation and should be avoided.
Wear protective gloves when working with this product.
Maintain good ventilation in the workplace at all times
Note
1, we produce the electronica potting adhesive series products, environmental temperature on A and B component mixed reaction speed influence.
2, in order to solve the defoaming and leakage, mixture suitable period and the production efficiency, the conflict can be adjusted according to the specific circumstances of A and B component proportion, A: B in 100:3 ~ 7 between belong to the normal range, the matching changes of solidified products of electrical performance, weatherproof and transparency of the impact is not big, only for curing the elastic mould product has A certain impact.
STORAGE
Store in a dry, cool place away from direct sunlight Optimal Storage: 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Rapid Steel Epoxy
1. Fast curing in 5 minutes, high transparency, high strength, excellent bonding
2. Water and heat resistant, anti-ageing
5 Min Rapid Steel Epoxy
I. Physical Properties
ADHESIVE A(Resin) B(Hardener)
ITEM
Color Clear Clear
Appearance Liquid Liquid
Viscosity @ 25°C, CPS 10000-12000 12000-15000
Specific Gravity ( g/cm3) 1.17 1
Major Constituent BISPHENOL-A POLYAMIDE
II. Usage
1.The ratio or principle agent and curing agent is 1:1. Stir after mixing and apply to the bonding piece.simply press
together to bond.
2.Surface treatment:Remove all oil and stain on the piece to be bonded by cleaning or grinding. Rubber and plastic
surfaces must be treated prior to bonding.
III. Reference Data
The transformation temperature of the hardened piece is 80°C. Adhesiveness lost at 100°C,Adhesiveness would not
be lost due to becoming bristle in winter or at -40°C.
Condition/Pull/Material Aluminum-Aluminun White iron-White iron ABS-ABS Wood-Wood
Tensile shear strength 160°C*30min 120kg/cm2 100kg/cm2 60-70kg/cm2 Material
breaking
24hr 90kg/cm2 80kg/cm2 50kg/cm2 80kg/cm2
7day 120kg/cm2 95kg/cm2 60-70kg/cm2 Material breaking
2. Water and heat resistant, anti-ageing
5 Min Rapid Steel Epoxy
I. Physical Properties
ADHESIVE A(Resin) B(Hardener)
ITEM
Color Clear Clear
Appearance Liquid Liquid
Viscosity @ 25°C, CPS 10000-12000 12000-15000
Specific Gravity ( g/cm3) 1.17 1
Major Constituent BISPHENOL-A POLYAMIDE
II. Usage
1.The ratio or principle agent and curing agent is 1:1. Stir after mixing and apply to the bonding piece.simply press
together to bond.
2.Surface treatment:Remove all oil and stain on the piece to be bonded by cleaning or grinding. Rubber and plastic
surfaces must be treated prior to bonding.
III. Reference Data
The transformation temperature of the hardened piece is 80°C. Adhesiveness lost at 100°C,Adhesiveness would not
be lost due to becoming bristle in winter or at -40°C.
Condition/Pull/Material Aluminum-Aluminun White iron-White iron ABS-ABS Wood-Wood
Tensile shear strength 160°C*30min 120kg/cm2 100kg/cm2 60-70kg/cm2 Material
breaking
24hr 90kg/cm2 80kg/cm2 50kg/cm2 80kg/cm2
7day 120kg/cm2 95kg/cm2 60-70kg/cm2 Material breaking
Rapid Transparent adhesive
Rapid Transparent adhesive is used in the PlexiGlass(prss gram force),Crystal,ceramics,leather,cardboard,wood,metal,chipboard.
Feature:Rapid Transparent adhesive has a super strong,long lasting,solvent free adhesive which is water resistant and can be painter or sanded.
Feature:Rapid Transparent adhesive has a super strong,long lasting,solvent free adhesive which is water resistant and can be painter or sanded.
Rapid Transparent adhesive
Rapid Transparent adhesive is used in the plexiglass(press gram fore),chipboard,masinry,mast and plastics,fabric and rubber.
Feature:Rapid Transparent adhesive is set free,fills uneven breaks,rapid setting,good chemical resistance,heat resistant(65.c maximum temperature),cold resistanr(-50.c minimum temperature),oil resistant,withstands rough handling.
Warranty:3 years
Feature:Rapid Transparent adhesive is set free,fills uneven breaks,rapid setting,good chemical resistance,heat resistant(65.c maximum temperature),cold resistanr(-50.c minimum temperature),oil resistant,withstands rough handling.
Warranty:3 years
Re-casting adhesive
this adhesive Tensile strength ( MPa )>2.8
shear strength (Mpa )>2.5
impermeability (Mpa) =1.0
competitive price high qual
shear strength (Mpa )>2.5
impermeability (Mpa) =1.0
competitive price high qual
Thursday, July 21, 2011
4 fix steel adhesives waterproof anti--aging
1.this adhesion has great resistance of tensile and shear strengh
3.suitable for steel junction
4.waterproof anti--aging
YC188 steel structural epoxy adhesion, for twocomponent epoxy products, with strong adhesive,rapid curing in room temperature.
In steel and concrete with mutual or self-adhesive has excellent anti-aging, shock resistance. Hight Shear strength, and suitable for reinforcement with
a variety of buildings, installation of machinery and equipment . Suitable for steel -steel .steel concrete and concreteconcrete ; The adhesive can also be used to
anchor steel bars, bolts, and metal, ceramics, stone, cement products,
wood and other materials and so on
Note:: all the technical data is provided by National Research & Analysis Center at
Chemical Building Materials
Hazard Symbols This product is not dangerous goods.however, Be able to transport
by the general chemical method . May cause sensitization by skin contact .
Eye contact will be irritation of eyes
when used pls with protection of gloves, masks, eye protection or other
protective items would have; accidentally get on skin or clothing
will be cleaned with plenty of water; if into eyes. Please medical treatment immediately
3.suitable for steel junction
4.waterproof anti--aging
YC188 steel structural epoxy adhesion, for twocomponent epoxy products, with strong adhesive,rapid curing in room temperature.
In steel and concrete with mutual or self-adhesive has excellent anti-aging, shock resistance. Hight Shear strength, and suitable for reinforcement with
a variety of buildings, installation of machinery and equipment . Suitable for steel -steel .steel concrete and concreteconcrete ; The adhesive can also be used to
anchor steel bars, bolts, and metal, ceramics, stone, cement products,
wood and other materials and so on
Note:: all the technical data is provided by National Research & Analysis Center at
Chemical Building Materials
Hazard Symbols This product is not dangerous goods.however, Be able to transport
by the general chemical method . May cause sensitization by skin contact .
Eye contact will be irritation of eyes
when used pls with protection of gloves, masks, eye protection or other
protective items would have; accidentally get on skin or clothing
will be cleaned with plenty of water; if into eyes. Please medical treatment immediately
Re-dispersible Emulsion Powder
HW-5118 is a type of re-dispersible emulsion powder of the EVA high polymer. is a soft emulsion powder.
1. Physical and chemical Properties
Appearance
White powder,flowing freely
Solid content
≥98.0%
Ash content(1000
ο
C)
10±2%
Stacking density g/I
400~500
Average particle diameter(µm)
~80
Viscidity of 50% water solution(pa s)
0.5~2.0
pH value
6~8
Lowest film-forming temperature
-2
ο
C
Glass transition temperature(Tg)
-6
ο
C
2. Uses(suggested)
1) Used to adhere mortar to outer walls for heat preservation
2) Used as a type of soft putty for outer walls
3) Used in cement-based polymer mortar products that are demanded
to have higher flexibility.
4) Used to adhere mortar to outer walls for heat preservation
3. Features : This product is a soft emulsion powder.It can disperse in water,increase the adhesion between mortar and its substrates,and improve the mechanic property and manageability of mortar.
4. Package:
Double-layer Bag,The product is packed in polyethylene film bag enclosed in compositefilm bag. Net weight is 25 or 20kg per bag.
5. Storage : Stored at dampproof places below 30
ο
C
1. Physical and chemical Properties
Appearance
White powder,flowing freely
Solid content
≥98.0%
Ash content(1000
ο
C)
10±2%
Stacking density g/I
400~500
Average particle diameter(µm)
~80
Viscidity of 50% water solution(pa s)
0.5~2.0
pH value
6~8
Lowest film-forming temperature
-2
ο
C
Glass transition temperature(Tg)
-6
ο
C
2. Uses(suggested)
1) Used to adhere mortar to outer walls for heat preservation
2) Used as a type of soft putty for outer walls
3) Used in cement-based polymer mortar products that are demanded
to have higher flexibility.
4) Used to adhere mortar to outer walls for heat preservation
3. Features : This product is a soft emulsion powder.It can disperse in water,increase the adhesion between mortar and its substrates,and improve the mechanic property and manageability of mortar.
4. Package:
Double-layer Bag,The product is packed in polyethylene film bag enclosed in compositefilm bag. Net weight is 25 or 20kg per bag.
5. Storage : Stored at dampproof places below 30
ο
C
Subscribe to:
Posts (Atom)