1.Brand:Farseeing
2.Name:hot melt adhesive film(O1601f8)
3.Specification:O1601f8
4.Material:PO
5.Mobile:0086-18939758527
The hot melt adhesive use of advanced extrusion coating processes, to provide 0.05 to 0.15 (mm) hot melt adhesive film. The product has a strong adhesion fastness, superior performance, and other washable, embroidered badges widely used in car interiors, various woven superscript gum, indoor decoration, noise insulation materials, handicrafts, sequins, metal sheets,:, thermal transfer, footwear material, textile, printing, and other nonwoven Fabric and adhesion between the fabric.
Performance characteristics are as follows:
1. The various types of textiles, badge,Embroidering metals, glass, etc. have excellent adhesion strength, water resistance and oil resistance of performance.
2. Washable have outstanding performance, wash-resistant homes and businesses.
3. This product is non - formaldehyde, non-toxic, is environmentally friendly products.
Product Specifications are as follows:
1. Name:PO hot melt adhesive film(O1601f8)
2. Material: (PO) modified material
3. Melt Range :95-105
4. Press-temperature :120-140
5. The proposed processing pressure: 0.5 -1.5kg/cm2
6. Recommended processing times :5-20 sec
Contact info:
Tel:0086-21-59503650etx809
Mobile:0086-18939758527
Saturday, August 6, 2011
PO hot melt adhesive film
The series of H096A(PO) hot melt adhesive film Using improted raw materials.Low press tempera,easy to operate.
The series of H096(PO) hot melt adhesive film is our of our our main products.
Using improted raw materials
Medium press temperature
Easy to operate
Technical datas are follows:
Model No
.: H096A
Material
: PO
Thickness
: 0.04-0.25mm
Width
: 48-106cm
Thickness tolerance
: ±0.005mm
Melt point
: 90±5°C
Suggested Press-temperature
: 140-160°C
Suggested Press time
: 10-15S
Aplication fileds
: embroider,logo,arts&crafts,shoes,hats,textile.
Laundry resistance
:40°C generally wash
Lining paper
: single silicon release paper
Film appearance
: colcorless&semi-transparent
Package
:100yard/roll or can be customized.
Note
: Suggested press temperature and press time are only based on the suggested technical condition,which is related to the press equipments, material's thickness, specific conductance and pressure. Customers need to test and confirm it first.
The series of H096(PO) hot melt adhesive film is our of our our main products.
Using improted raw materials
Medium press temperature
Easy to operate
Technical datas are follows:
Model No
.: H096A
Material
: PO
Thickness
: 0.04-0.25mm
Width
: 48-106cm
Thickness tolerance
: ±0.005mm
Melt point
: 90±5°C
Suggested Press-temperature
: 140-160°C
Suggested Press time
: 10-15S
Aplication fileds
: embroider,logo,arts&crafts,shoes,hats,textile.
Laundry resistance
:40°C generally wash
Lining paper
: single silicon release paper
Film appearance
: colcorless&semi-transparent
Package
:100yard/roll or can be customized.
Note
: Suggested press temperature and press time are only based on the suggested technical condition,which is related to the press equipments, material's thickness, specific conductance and pressure. Customers need to test and confirm it first.
PO hotmelt adhesive powder
1.For acrylic, crystal diamond etc
2.Name:hotmelt adhesive powder
3.Type:O1603p
4.Material:PO
5.Mobile:86-18939758527
Hotmelt adhesive powder(O1603p)
Type:
O1603p
Material:
PO
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
acrylic diamond,aluminium materials.
Substrates:
fabrics,aluminum materials,acrylic materials ect
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
O1603p
75-90
150
180
115-135
0.5-1.5
10-20
40°C
good
good
2.Name:hotmelt adhesive powder
3.Type:O1603p
4.Material:PO
5.Mobile:86-18939758527
Hotmelt adhesive powder(O1603p)
Type:
O1603p
Material:
PO
Packing:
25kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
acrylic diamond,aluminium materials.
Substrates:
fabrics,aluminum materials,acrylic materials ect
Type
Melt
Range
(
°C)
Melt Index g/10min@160°C
Melt Index
g/10min@160°C
Bonding
condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry
O1603p
75-90
150
180
115-135
0.5-1.5
10-20
40°C
good
good
POLY URETHANE-A
Poly Urethane-A
1. One part and easy to use
2.excellent adhesive for most building
3.it passed ISO9001-2000
Poly Urethane
FEATURE
1)one part room temperature curing, easy to use
2) Excellent adhesive for most building materials including glass,cereamic, aluminum,plastic. especially for automobile windscreen and side windows, automobile parts as bonding, caulking,door and window seals
3) storage and shlf life is 9-12 months
4) storing in original unopend containers in a dry place.temperature should be around 25°c±2°c.previously opened catridge should be used as soon as possible
HOW TO USE:
1.Keep production surface clean and dry place without oil,soap or greae for perfect effect
2. cut the tube end according to actual requirement, inject with extruder to maker the sealant throughly cantcat with the surface which is to be sealed
3. prodect skin from sealant for a long diately flush eby with a lot of reache of chidren and then see a doctor if the irritation persists
specification:
300ml/tube,25pcs/ctn,26*26*25cm
1. One part and easy to use
2.excellent adhesive for most building
3.it passed ISO9001-2000
Poly Urethane
FEATURE
1)one part room temperature curing, easy to use
2) Excellent adhesive for most building materials including glass,cereamic, aluminum,plastic. especially for automobile windscreen and side windows, automobile parts as bonding, caulking,door and window seals
3) storage and shlf life is 9-12 months
4) storing in original unopend containers in a dry place.temperature should be around 25°c±2°c.previously opened catridge should be used as soon as possible
HOW TO USE:
1.Keep production surface clean and dry place without oil,soap or greae for perfect effect
2. cut the tube end according to actual requirement, inject with extruder to maker the sealant throughly cantcat with the surface which is to be sealed
3. prodect skin from sealant for a long diately flush eby with a lot of reache of chidren and then see a doctor if the irritation persists
specification:
300ml/tube,25pcs/ctn,26*26*25cm
POLYISOBUTYLENE
We Shandong Hongrui Petrochemical is one of the largest manufacture of polyisobutylene in the world.
We are looking for agents to introduce HRD PIB to the local market.
We Shandong Hongrui Petrochemical is one of the largest manufacture of polyisobutylene in the world. We are an ISO9001-2000 company. We have both food grade and industrial grade polyisobutylene with viscosity average molecular weight from 35000 to 100000.
Our HRD PIB is high in quality and reasonable in price.
We are looking for agents to introduce HRD PIB to the local market.
We Shandong Hongrui Petrochemical is one of the largest manufacture of polyisobutylene in the world. We are an ISO9001-2000 company. We have both food grade and industrial grade polyisobutylene with viscosity average molecular weight from 35000 to 100000.
Our HRD PIB is high in quality and reasonable in price.
POVAL
POVAL
CAS NO: 9002-89-5
Molecular Formula: (C2H4O)n
Molecular Weight: 44.05
Properties: white powder
POLY(VINYL ALCOHOL)
CAS NO:
9002-89-5
Molecular Formula:
(C
2
H
4
O)n
Molecular Weight:
44.05
Properties:
white powder or flakes
H.S CODE
: 3905300000
Product specification
1. Fully Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1599
99.0-100
16.0-22.0
2.5
8.0
1.5
5-7
PVA1799L
99.0-100
21.0-27.9
2.5
8.0
1.5
5-7
PVA1799H
99.0-100
28.0-35.0
2.5
8.0
1.5
5-7
PVA2099L
99.0-100
32.0-38.0
2.5
8.0
1.5
5-7
PVA2299L
99.0-100.0
37.0-48.0
2.5
8.0
1.5
5-7
PVA2499L
99.0-100.0
47.0-63.0
2.5
8.0
1.5
5-7
PVA2699L
99.0-100
62.0-75.0
2.5
8.0
1.5
5-7
PVA2899L
99.0-100
75.0-88.0
2.0
5.0
0.7
5-7
2. Medium Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1792L
90.0-94.0
20.0-27.9
2.0
9.0
1.0
5-7
PVA1792H
90.0-94.0
28.0-33.0
2.0
9.0
1.0
5-7
PVA2092
90.0-94.0
32.0-38.0
2.0
9.0
1.0
5-7
PVA1797L
97.0-99.0
21.0-27.9
2.0
9.0
1.5
5-7
PVA1797H
97.0-99.0
28.0-33.0
2.0
9.0
1.5
5-7
3. Partly Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1788
86.0-90.0
20.0-33.0
1.5
9.0
1.0
5-7
PVA2088
86.0-90.0
32.0-38.0
1.5
9.0
1.0
5-7
PVA2288
86.0-90.0
37.0-48.0
1.5
9.0
1.0
5-7
PVA2488
86.0-90.0
47.0-60.0
1.5
9.0
1.0
5-7
The PVA production facilities of our company have been perfecting day by bay with the long-term absorption and technological transformation on the basis of importing the complete set of technology from Kuraray Company of Japan. PVA produced by our company is good in performances and stable in quality. It enjoys a great reputation both at home and abroad.
CAS NO: 9002-89-5
Molecular Formula: (C2H4O)n
Molecular Weight: 44.05
Properties: white powder
POLY(VINYL ALCOHOL)
CAS NO:
9002-89-5
Molecular Formula:
(C
2
H
4
O)n
Molecular Weight:
44.05
Properties:
white powder or flakes
H.S CODE
: 3905300000
Product specification
1. Fully Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1599
99.0-100
16.0-22.0
2.5
8.0
1.5
5-7
PVA1799L
99.0-100
21.0-27.9
2.5
8.0
1.5
5-7
PVA1799H
99.0-100
28.0-35.0
2.5
8.0
1.5
5-7
PVA2099L
99.0-100
32.0-38.0
2.5
8.0
1.5
5-7
PVA2299L
99.0-100.0
37.0-48.0
2.5
8.0
1.5
5-7
PVA2499L
99.0-100.0
47.0-63.0
2.5
8.0
1.5
5-7
PVA2699L
99.0-100
62.0-75.0
2.5
8.0
1.5
5-7
PVA2899L
99.0-100
75.0-88.0
2.0
5.0
0.7
5-7
2. Medium Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1792L
90.0-94.0
20.0-27.9
2.0
9.0
1.0
5-7
PVA1792H
90.0-94.0
28.0-33.0
2.0
9.0
1.0
5-7
PVA2092
90.0-94.0
32.0-38.0
2.0
9.0
1.0
5-7
PVA1797L
97.0-99.0
21.0-27.9
2.0
9.0
1.5
5-7
PVA1797H
97.0-99.0
28.0-33.0
2.0
9.0
1.5
5-7
3. Partly Hydrolyzed Grade
Item
Grade
Degree of alcoholysis (mol/mol) %
≥
Viscosity mpa.s
Sodium acetate %
≤
Volatile matter %
≤
Ash %
≤
PH value
PVA1788
86.0-90.0
20.0-33.0
1.5
9.0
1.0
5-7
PVA2088
86.0-90.0
32.0-38.0
1.5
9.0
1.0
5-7
PVA2288
86.0-90.0
37.0-48.0
1.5
9.0
1.0
5-7
PVA2488
86.0-90.0
47.0-60.0
1.5
9.0
1.0
5-7
The PVA production facilities of our company have been perfecting day by bay with the long-term absorption and technological transformation on the basis of importing the complete set of technology from Kuraray Company of Japan. PVA produced by our company is good in performances and stable in quality. It enjoys a great reputation both at home and abroad.
3094 Optical UV adhesive
Low viscosity,high refractive index,euphotic index
Used for bonding optics lens,some high refractive index LCD
color:clear
3094 Optical UV adhesive:
Low viscosity,fast curing,low odor,high refractive index and euphotic index.
Used for bonding optics lens and some high refractive index LCD.
Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Fixture time
Temperature range(°c)
Tensile Strength(N/mm²)
Hardness(Shore D)
Refractive index
3390
50g/250g/1kg
Clear
350
≤15s
-50~150
≥10
80
1.48~1.51
3391
50g/250g/1kg
Clear
650
≤15s
-50~150
≥12
80
1.48~1.51
3392
50g/250g/1kg
Clear
1500
≤15s
-50~150
≥12
70
1.48~1.51
3393
50g/250g/1kg
Clear
2500
≤15s
-50~150
≥12
65
1.48~1.51
3352
50g/250g/1kg
Amber
20000
≤10s
-50~120
≥12
60
/
3366
50g/250g/1kg
Amber
8000
≤15s
-50~110
≥12
60
/
3011
50g/250g/1kg
Clear
300
≤10s
-50~150
≥2
70
1.48~1.51
3379
50g/250g/1kg
Green
12000
≤15s
-50~150
≥11
75
/
3094
50g/250g/1kg
Clear
800
≤10s
-50~1500
≥5
50
1.53~1.55
Used for bonding optics lens,some high refractive index LCD
color:clear
3094 Optical UV adhesive:
Low viscosity,fast curing,low odor,high refractive index and euphotic index.
Used for bonding optics lens and some high refractive index LCD.
Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Fixture time
Temperature range(°c)
Tensile Strength(N/mm²)
Hardness(Shore D)
Refractive index
3390
50g/250g/1kg
Clear
350
≤15s
-50~150
≥10
80
1.48~1.51
3391
50g/250g/1kg
Clear
650
≤15s
-50~150
≥12
80
1.48~1.51
3392
50g/250g/1kg
Clear
1500
≤15s
-50~150
≥12
70
1.48~1.51
3393
50g/250g/1kg
Clear
2500
≤15s
-50~150
≥12
65
1.48~1.51
3352
50g/250g/1kg
Amber
20000
≤10s
-50~120
≥12
60
/
3366
50g/250g/1kg
Amber
8000
≤15s
-50~110
≥12
60
/
3011
50g/250g/1kg
Clear
300
≤10s
-50~150
≥2
70
1.48~1.51
3379
50g/250g/1kg
Green
12000
≤15s
-50~150
≥11
75
/
3094
50g/250g/1kg
Clear
800
≤10s
-50~1500
≥5
50
1.53~1.55
PP fiber for skim coat
1.Origin:China
2.Length:3mm,6mm,12mm
3.Certificate:ISO9001
Functions:
pp fiber is a kind of concrete fiber
pp fiber could be used for many constructions for concrete reinforcement.
1.Prevent concrete crazing effectively
2.Improve tensile strength of concrete.
3.Improve the concussion and resistance to wear of concrete.
4.Improve barrier property of concrete.
Application:
1.Projects like concrete road, bridge, airport road and factory floor which strictly require cracking resistance.
2.The walls of tunnels, mines, roofs and reservoir projects with special construction
Specification:
ITEMS
STANDARD
ANALYSIS RESULTS
LENGTH
6/12MM
PASSED
DIAMETER
35
PASSED
APPEARANCE
BUNCHY MONOFILAMENT
PASSED
MELT POINT
(
°C)
167
PASSED
Elastic Modulus (MPa)
3500
PASSED
TENSILE STRENGTH(MPa)
570
PASSED
SPECIFIC GRAVITY(g/m³)
0.91
PASSED
ALKALI,ACID&SALT RESISTANCE
HIGH
PASSED
2.Length:3mm,6mm,12mm
3.Certificate:ISO9001
Functions:
pp fiber is a kind of concrete fiber
pp fiber could be used for many constructions for concrete reinforcement.
1.Prevent concrete crazing effectively
2.Improve tensile strength of concrete.
3.Improve the concussion and resistance to wear of concrete.
4.Improve barrier property of concrete.
Application:
1.Projects like concrete road, bridge, airport road and factory floor which strictly require cracking resistance.
2.The walls of tunnels, mines, roofs and reservoir projects with special construction
Specification:
ITEMS
STANDARD
ANALYSIS RESULTS
LENGTH
6/12MM
PASSED
DIAMETER
35
PASSED
APPEARANCE
BUNCHY MONOFILAMENT
PASSED
MELT POINT
(
°C)
167
PASSED
Elastic Modulus (MPa)
3500
PASSED
TENSILE STRENGTH(MPa)
570
PASSED
SPECIFIC GRAVITY(g/m³)
0.91
PASSED
ALKALI,ACID&SALT RESISTANCE
HIGH
PASSED
PP&PE&silicone rubber primer
PP,PE primer is a exclusively effective for cyanoacrylate adhesive to increase the bonding strength on difficult to bond
PP,PE primer is a exclusively effective for cyanoacrylate adhesive to increase the bonding strength on difficult to bond polypropylene and polyethylene materials ,
it is effective on the following materials
1:polypropylene
2:polyethylene
3:ethylene propylene terpolymer rubber
PP,PE primer is a exclusively effective for cyanoacrylate adhesive to increase the bonding strength on difficult to bond polypropylene and polyethylene materials ,
it is effective on the following materials
1:polypropylene
2:polyethylene
3:ethylene propylene terpolymer rubber
PP, PE adhesive
PP,PE adhesive, 779 adhesive (glue) is a synthetic one-component self-adhesive low toxicity solvent
PE, PP adhesive (glue)
Performance and application
779 adhesive (glue) is a synthetic one-component self-adhesive low toxicity solvent, mainly
as natural resins and synthetic resins and solvents. Dedicated to all kinds of PP, PE, nylon ABS, metal, rubber materials, the adhesion between can also be used for nylon, ceramic, ABS, AS, EVA, PVC, polystyrene, polyvinyl vinyl, metal, rubber, wood, textiles, etc., and mutual self-adhesive sticky. A dry well, the strong bonding, highly flexible, user-friendly features, has good bonding strength without the special treatment by PP, PE, Nylonfor. It is the best adhesive for these materials like PP, PE, Nylonfor since it has good water, heat and cold resistance.
Color:
Light yellow
Usage
(1) Remove the residual surface oil and release agent, and keep it clean.
(2) Coating a layer of thin liquid on dry oil-free double-sided adhesive surface, it will dry for 5-15 minutes.
(3) Leave it semi-dry state, using after 24 hours.
(4) Maximum bonding strength can be achieved 2-4 days later.
Storage
:
(1) Stir it before use, close tightly after the use. Keep it in a cool, dry. Ventilated area
(2) Shelf life: one year
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties
.
Material removed from containers may be contaminated during
use. Do not return product to the original container. HYBOND
Corporation cannot assume responsibility for product which
Was contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.
PE, PP adhesive (glue)
Performance and application
779 adhesive (glue) is a synthetic one-component self-adhesive low toxicity solvent, mainly
as natural resins and synthetic resins and solvents. Dedicated to all kinds of PP, PE, nylon ABS, metal, rubber materials, the adhesion between can also be used for nylon, ceramic, ABS, AS, EVA, PVC, polystyrene, polyvinyl vinyl, metal, rubber, wood, textiles, etc., and mutual self-adhesive sticky. A dry well, the strong bonding, highly flexible, user-friendly features, has good bonding strength without the special treatment by PP, PE, Nylonfor. It is the best adhesive for these materials like PP, PE, Nylonfor since it has good water, heat and cold resistance.
Color:
Light yellow
Usage
(1) Remove the residual surface oil and release agent, and keep it clean.
(2) Coating a layer of thin liquid on dry oil-free double-sided adhesive surface, it will dry for 5-15 minutes.
(3) Leave it semi-dry state, using after 24 hours.
(4) Maximum bonding strength can be achieved 2-4 days later.
Storage
:
(1) Stir it before use, close tightly after the use. Keep it in a cool, dry. Ventilated area
(2) Shelf life: one year
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties
.
Material removed from containers may be contaminated during
use. Do not return product to the original container. HYBOND
Corporation cannot assume responsibility for product which
Was contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.
PROMOTION SINGLE-CHANNEL BUTYL SEALANT
solvent-free, no fog, not curing, with a permanent plastic first of the insulating glass sealant.
PROMOTION SINGLE-CHANNEL BUTYL SEALANT
Product Features:
1. Use after the solid-state heating and melting.Have superior adhesion for glass, aluminum and white steel.
2. The best sealing performance, water vapor through rate insufficient the sixtieth part of poly sulfur rubber.
3.Short curing time (1 minute cure).
4.The single sealing reduced double sealing insulating glass's troublesome craft.Improve the production efficiency,shorten the delivery time and reduce the construction cost.
5.Reusable, no waste, insulating glass from the broken off the hot melt can be reused.
USE:
Use special hot melt glue machine after heating melted besmear to the insulating glass's glue-coating part,a minute finalizes the design the delivery after installation.
Attention:
1.To control the temperature (110-140 °C)
2.Glue-coating part should be continuous and uniform,gap and discontinuous are not allowed
3.Coating thickness to meet the requirements (3-5mm)
Items
Single-component hot melt butyl sealant
The latest double component polysulfide rubber sealant
Cost per square
5 yuan / m²
10-12/m²
Mix
Single component do not mix
Mixed according to a certain mixing ratio
Density
1.15g/cm³
A:1.89g/cm³ B:1.76g/m³
Odor
Odorless (environmental glue)
Polysulfide taste (Not environmental
protection)
Curing time
1 minute can use
12-24 hours
Operating standards climate
-10°C-60°C
23°C 50%relative humidity
Water vapor through rate
0.65g/m²/year
6-16g/m²/year
UV resistant
Excellent
ordinary
Ozone resistance
Excellent
ordinary
Surplus glue
Reusable
No longer available
Ageing resistance
Superior 25-30 year
Ordinary 10-20 year
PROMOTION SINGLE-CHANNEL BUTYL SEALANT
Product Features:
1. Use after the solid-state heating and melting.Have superior adhesion for glass, aluminum and white steel.
2. The best sealing performance, water vapor through rate insufficient the sixtieth part of poly sulfur rubber.
3.Short curing time (1 minute cure).
4.The single sealing reduced double sealing insulating glass's troublesome craft.Improve the production efficiency,shorten the delivery time and reduce the construction cost.
5.Reusable, no waste, insulating glass from the broken off the hot melt can be reused.
USE:
Use special hot melt glue machine after heating melted besmear to the insulating glass's glue-coating part,a minute finalizes the design the delivery after installation.
Attention:
1.To control the temperature (110-140 °C)
2.Glue-coating part should be continuous and uniform,gap and discontinuous are not allowed
3.Coating thickness to meet the requirements (3-5mm)
Items
Single-component hot melt butyl sealant
The latest double component polysulfide rubber sealant
Cost per square
5 yuan / m²
10-12/m²
Mix
Single component do not mix
Mixed according to a certain mixing ratio
Density
1.15g/cm³
A:1.89g/cm³ B:1.76g/m³
Odor
Odorless (environmental glue)
Polysulfide taste (Not environmental
protection)
Curing time
1 minute can use
12-24 hours
Operating standards climate
-10°C-60°C
23°C 50%relative humidity
Water vapor through rate
0.65g/m²/year
6-16g/m²/year
UV resistant
Excellent
ordinary
Ozone resistance
Excellent
ordinary
Surplus glue
Reusable
No longer available
Ageing resistance
Superior 25-30 year
Ordinary 10-20 year
PS-103 sealant
Water based adhesive and sealant
>Good initial adhesion
>strong Holding Power
>Weather-proof
>Fast Curing Capacity
PS-103 adhesive and sealant
for Laminating, UV varnishing,calendering of kinds of paper carton etc.
Feathers:
Fast Curing,
Easy coating,
Strong viscosity,
Good Weather-proof Capability,
No irritating and poisonous odor
DataSheet:
PS-103 Water based adhesive and sealant
Solid Content:
48±2%
Viscosity:
1800---3000CPS
Application:
for
Laminating,
UV varnishing,
calendering,
Paper glue .
Storage and Packing
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Note
:
User should test the product before use, to check whether the products can meet the typical application and technique.
More Tech Info, please contact us.
>Good initial adhesion
>strong Holding Power
>Weather-proof
>Fast Curing Capacity
PS-103 adhesive and sealant
for Laminating, UV varnishing,calendering of kinds of paper carton etc.
Feathers:
Fast Curing,
Easy coating,
Strong viscosity,
Good Weather-proof Capability,
No irritating and poisonous odor
DataSheet:
PS-103 Water based adhesive and sealant
Solid Content:
48±2%
Viscosity:
1800---3000CPS
Application:
for
Laminating,
UV varnishing,
calendering,
Paper glue .
Storage and Packing
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Note
:
User should test the product before use, to check whether the products can meet the typical application and technique.
More Tech Info, please contact us.
PS-5616 aluminum foil glue
PS-5616 aluminum foil glue
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-5616 Solvent aluminum foil glue
for Aluminum foil tape, Masking tape, PET Tape, PVC Film, Stiker, Labels
Feature:
PS-5616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as PET tape, Masking tape, PVC, cold laminating film, copper foil and aluminum foil tape.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±500 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-5616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
Packing:
Application:
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-5616 Solvent aluminum foil glue
for Aluminum foil tape, Masking tape, PET Tape, PVC Film, Stiker, Labels
Feature:
PS-5616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as PET tape, Masking tape, PVC, cold laminating film, copper foil and aluminum foil tape.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±500 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-5616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
Packing:
Application:
PS-615 adhesive glue for tape
PS-615 adhesive glue for tape, film
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-615 Solvent Pressure-sensitive adhesive glue
for Fabric, Double sticky, PET Tape, and Cold laminating film
Feature:
PS-615 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
4000±500 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-615 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-615 Solvent Pressure-sensitive adhesive glue
for Fabric, Double sticky, PET Tape, and Cold laminating film
Feature:
PS-615 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
4000±500 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-615 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
PS-616 Contact Adhesive for PVC Film
PS-616 Pressure-sensitive Contact adhesive
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-616 Solvent Pressure-sensitive Contact adhesive Glue
For PVC Film
Feature:
PS-616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil, PET Label, PVC Car sticker
.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±1000 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
>Good viscosity
>strong Holding Power
>Environment Friend
>Widely Applicated
PS-616 Solvent Pressure-sensitive Contact adhesive Glue
For PVC Film
Feature:
PS-616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil, PET Label, PVC Car sticker
.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±1000 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
PS-616 Solvent glue
Pressure-sensitive adhesive glue
>50+/-1%, 5000+/-1000CPS
>Strong Holding Power
>Environment Friend
>Widely Applicated
PS-616 Solvent Pressure-sensitive adhesive Glue
for PVC Car Sticker, PVC Cold laminating film, PVC protective film
Feature:
PS-616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil, PET Label, PVC Car sticker
.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±1000 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
>50+/-1%, 5000+/-1000CPS
>Strong Holding Power
>Environment Friend
>Widely Applicated
PS-616 Solvent Pressure-sensitive adhesive Glue
for PVC Car Sticker, PVC Cold laminating film, PVC protective film
Feature:
PS-616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates.
Properties:
1. No high temperature hardening at room temperature bridge, it can get the property of being bridged.
2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent.
Application:
With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil, PET Label, PVC Car sticker
.
General features
Solid content
50±1
Viscosity(LVC,N4,60r/s,25 °C)
5000±1000 viscosity
Solvent:
Ethyl Acetate, toluene
The viscosity of the adhesive on PVC (only for reference)
Drying condition
5 minutes at 90°C
Initial adhesion power(J.Dow)
11~18
Holding adhesion power
>48hours
(2.5cm×2.5cm×1kg,25°C)
180°adhesion(PSTC-1),kg/inch
>1.2 adhesion power
Film thickness
25μm
Storage:
Sealed in closed vessel, to prevent evaporation.
Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same.
Solubility
: PS-616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons.
Note
: User should test the product before use, to check whether the products can meet the typical application and technique.
PSA Hot Melt for Baby Diapers
PSA Hot Melt
1.Shape:block
2.Strong Peeling
3.Low temperature in use:120-140 degree
4.Easy melting
PSA Hot Melt for Baby Diaper:
1.Feature:
strong Peeling strength, excellent anti-aging properties, good Elasticity, low temperature in use and energy saving, avoid the problem of adhesive carbonization due to high temperature.
2.Application:
Low temperature construction adhesive used on baby diapers or sanitary napkin
.
3.Technical data:
Properties
Specification value
Test Method and equipment
Shape
Light yellow in block or pillow shaped package
Visual
Solid Content
100%
Base
High polymer
Soften Point
75±5°C
GB/T 15332
Softening point tester
Viscosity
1500±300CPS at140°C; 1000±300CPS at150°C; 700±150CPS at160°C
SNB-2 Digital Rotational Viscometer, 27# rotor test
Recommend working temperature
120-140°C
usage
Low temperature construction adhesive used on the baby diaper and Women sanitary napkin.
4.Storage period:
2 Years (indoor, unexposed to the sunlight, not more than 40 degree)
5. Method for clearing equipment:
You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 degree.After clean-up, flush it by the same hot melt adhesive not more than degree.
6.Safety Precautions:
To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180degree . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt.
1.Shape:block
2.Strong Peeling
3.Low temperature in use:120-140 degree
4.Easy melting
PSA Hot Melt for Baby Diaper:
1.Feature:
strong Peeling strength, excellent anti-aging properties, good Elasticity, low temperature in use and energy saving, avoid the problem of adhesive carbonization due to high temperature.
2.Application:
Low temperature construction adhesive used on baby diapers or sanitary napkin
.
3.Technical data:
Properties
Specification value
Test Method and equipment
Shape
Light yellow in block or pillow shaped package
Visual
Solid Content
100%
Base
High polymer
Soften Point
75±5°C
GB/T 15332
Softening point tester
Viscosity
1500±300CPS at140°C; 1000±300CPS at150°C; 700±150CPS at160°C
SNB-2 Digital Rotational Viscometer, 27# rotor test
Recommend working temperature
120-140°C
usage
Low temperature construction adhesive used on the baby diaper and Women sanitary napkin.
4.Storage period:
2 Years (indoor, unexposed to the sunlight, not more than 40 degree)
5. Method for clearing equipment:
You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 degree.After clean-up, flush it by the same hot melt adhesive not more than degree.
6.Safety Precautions:
To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180degree . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt.
3094 clear optical UV adhesive
Used for bonding optics lens and some high refractive index LCD
Fast curing,low odor,high refractive index and euphotic index
3094 UV adhesive:
Used for bonding optics lens and some high refractive index LCD.
low viscosity,fast curing,low odor,high refractive index and euphotic index.
Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Fixture time
Temperature range(°c)
Tensile Strength(N/mm²)
Hardness(Shore D)
Refractive index
3390
50g/250g/1kg
Clear
350
≤15s
-50~150
≥10
80
1.48~1.51
3391
50g/250g/1kg
Clear
650
≤15s
-50~150
≥12
80
1.48~1.51
3392
50g/250g/1kg
Clear
1500
≤15s
-50~150
≥12
70
1.48~1.51
3393
50g/250g/1kg
Clear
2500
≤15s
-50~150
≥12
65
1.48~1.51
3352
50g/250g/1kg
Amber
20000
≤10s
-50~120
≥12
60
/
3366
50g/250g/1kg
Amber
8000
≤15s
-50~110
≥12
60
/
3011
50g/250g/1kg
Clear
300
≤10s
-50~150
≥2
70
1.48~1.51
3379
50g/250g/1kg
Green
12000
≤15s
-50~150
≥11
75
/
3094
50g/250g/1kg
Clear
800
≤10s
-50~1500
≥5
50
1.53~1.55
Fast curing,low odor,high refractive index and euphotic index
3094 UV adhesive:
Used for bonding optics lens and some high refractive index LCD.
low viscosity,fast curing,low odor,high refractive index and euphotic index.
Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Fixture time
Temperature range(°c)
Tensile Strength(N/mm²)
Hardness(Shore D)
Refractive index
3390
50g/250g/1kg
Clear
350
≤15s
-50~150
≥10
80
1.48~1.51
3391
50g/250g/1kg
Clear
650
≤15s
-50~150
≥12
80
1.48~1.51
3392
50g/250g/1kg
Clear
1500
≤15s
-50~150
≥12
70
1.48~1.51
3393
50g/250g/1kg
Clear
2500
≤15s
-50~150
≥12
65
1.48~1.51
3352
50g/250g/1kg
Amber
20000
≤10s
-50~120
≥12
60
/
3366
50g/250g/1kg
Amber
8000
≤15s
-50~110
≥12
60
/
3011
50g/250g/1kg
Clear
300
≤10s
-50~150
≥2
70
1.48~1.51
3379
50g/250g/1kg
Green
12000
≤15s
-50~150
≥11
75
/
3094
50g/250g/1kg
Clear
800
≤10s
-50~1500
≥5
50
1.53~1.55
PSI Aqua mend binder
PSI Aqua mend binder
1.advanced adhesive with sound stickiness quality.
2.dissoluble and dis-shrinking under water
PSI Aqua mend binder
application:
1.
suitable for many materials with wet surface material or under water.
2.
can repair or cohere joint, cavity, cut, or scratch on glass fiber reinforced plastics car body, boat body and other material container, tube.
3.
can repair shell of storage battery, and insulation, seal electrical equipment, and splice PVC plastic.
PSI
Aqua mend binderFeatures:
1.
advanced adhesive with sound stickiness quality.
2.
dissoluble and dis-shrinking under fresh water or salt water.
3.
It will not drip and flow
4.
It is easy to use.
usage:
1 before use, it is needed to clean rust or oil of the repair part
2. take out of the needed quantity glue stick,And mix inner part and outside part together.
3.Tps:
you can also mix with pigment so the adhesive color will be the same with the repair material.
4.Compacting the glue in the repair part, and trying to extrude it in the cave or hole.
Under damp or dripping occasion. it is needed to compact for a while until the adhesive begins to solid.
parameter:
max temperture:121°C/149°C
hardness after 24 hours:56-75D shore
Tensile strength:5.5-6.9MPA
Chemical resistance: Oil, alcohol, ketone, hybrocarbon,
Saline solution, weak acid, weak base
Reduction rate: below 1%
Electric resistance:30000
MΩ
Insulation strength: 11.8
kV/mm
Non-volatile content: 100%
1.advanced adhesive with sound stickiness quality.
2.dissoluble and dis-shrinking under water
PSI Aqua mend binder
application:
1.
suitable for many materials with wet surface material or under water.
2.
can repair or cohere joint, cavity, cut, or scratch on glass fiber reinforced plastics car body, boat body and other material container, tube.
3.
can repair shell of storage battery, and insulation, seal electrical equipment, and splice PVC plastic.
PSI
Aqua mend binderFeatures:
1.
advanced adhesive with sound stickiness quality.
2.
dissoluble and dis-shrinking under fresh water or salt water.
3.
It will not drip and flow
4.
It is easy to use.
usage:
1 before use, it is needed to clean rust or oil of the repair part
2. take out of the needed quantity glue stick,And mix inner part and outside part together.
3.Tps:
you can also mix with pigment so the adhesive color will be the same with the repair material.
4.Compacting the glue in the repair part, and trying to extrude it in the cave or hole.
Under damp or dripping occasion. it is needed to compact for a while until the adhesive begins to solid.
parameter:
max temperture:121°C/149°C
hardness after 24 hours:56-75D shore
Tensile strength:5.5-6.9MPA
Chemical resistance: Oil, alcohol, ketone, hybrocarbon,
Saline solution, weak acid, weak base
Reduction rate: below 1%
Electric resistance:30000
MΩ
Insulation strength: 11.8
kV/mm
Non-volatile content: 100%
PSI Quick Repair Paste
Used for repairing steel products, such as repairing crack in engine cylinder body, filling foundry sand hole, Quick Repair Past
Quick Repair Paste
PSI REPAIRITQUIK series (repairit quick sealant)
It is the patented product of Polymeric Systems, Inc. It can be used to repair, fix and produce. It can seal the leaking on various containers and pipes of factories, homes and cars. It can avoid the trouble of installation. It can be used to produce samples and parts. It can also be used to strengthen rusted and abraded parts.
FASTSTEEL
Used to patch steel. For example: patch cracks on the engine cylinder, fill casting blowhole, stop pipeline leaking, repair defective parts, and produce sample pieces.
REPAIRITQUIK
Multi-functions, quick solidification, primary solidification period is 3 to 5 minutes, can be used to stick metals, wood, glass, ceramics, can also be used for insulation and sealing of electronics.
AUQAMEND
Good combination property, can be used to repair and fix directly on the damp surface or even under water, particularly suitable to the leaking stoppage and sealing of fiberglass reinforced plastic body of ships, bathtubs and PVC pipelines, good chemical resistance.
QUICKCOPPER
Effective in leaking stoppage of brass pipelines, valves, spray nozzles, water taps, can be used to repair even on damp surface
QUIKALUMINUM
Suitable to repair and strengthen equipments, containers, foundry goods, doors and windows of aluminum and aluminum alloy
QUIKPLASTIK
Can be used to repair and stick many kinds of plastic goods of PVC, PVCC and ABS, allow certain flexible transformation, operation time is 20 to 30 minutes
Quick Repair Paste
PSI REPAIRITQUIK series (repairit quick sealant)
It is the patented product of Polymeric Systems, Inc. It can be used to repair, fix and produce. It can seal the leaking on various containers and pipes of factories, homes and cars. It can avoid the trouble of installation. It can be used to produce samples and parts. It can also be used to strengthen rusted and abraded parts.
FASTSTEEL
Used to patch steel. For example: patch cracks on the engine cylinder, fill casting blowhole, stop pipeline leaking, repair defective parts, and produce sample pieces.
REPAIRITQUIK
Multi-functions, quick solidification, primary solidification period is 3 to 5 minutes, can be used to stick metals, wood, glass, ceramics, can also be used for insulation and sealing of electronics.
AUQAMEND
Good combination property, can be used to repair and fix directly on the damp surface or even under water, particularly suitable to the leaking stoppage and sealing of fiberglass reinforced plastic body of ships, bathtubs and PVC pipelines, good chemical resistance.
QUICKCOPPER
Effective in leaking stoppage of brass pipelines, valves, spray nozzles, water taps, can be used to repair even on damp surface
QUIKALUMINUM
Suitable to repair and strengthen equipments, containers, foundry goods, doors and windows of aluminum and aluminum alloy
QUIKPLASTIK
Can be used to repair and stick many kinds of plastic goods of PVC, PVCC and ABS, allow certain flexible transformation, operation time is 20 to 30 minutes
PST-390 UV Adhesive
UV Adhesive:
1High prevail strength and better optical clarity
2Used for bonding,sealing,coating,tacking,fastening and filling
UV ADHESIVE:
UV-curing adhesive is a single component resin based adhesive suitable for bonding a wide range of materials, such as glass, metal, plastic and so on. It has no solvent (solid content 100 percent). It cures rapidly and operates simply. The cured product has high prevail strength and better optical clarity and used for bonding, sealing, fastening and filling.
Useful range:
furniture, handcraft like crystal; optical lens; optical communication coupler; medical device; electric industry; watch industry; liquidcrystal displayer etc.
390 Ultraviolet radiation –UV adhesive
One component, low viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
391 Ultraviolet radiation –UV adhesive
One component, low viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
392 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
393 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
394 UV adhesive
One component, high viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing. Light transmittance, used in LCD
395 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup. Used in bonding metal and glass part.
3094 Optical UV adhesive
One component, low viscosity, fast curing. Low odor, high refractive index and light transmittance
Used in bonding optics lens and partial high refractive index LCD
3011 UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup. Used in bonding the acrylic glass, polycarbonate,etc.
Technical Data:
Item
Packaging
Color
Viscosity (mPa.s)
Density
100W/cm
2
@365nm
Fixture time
Tensile Strength (N/mm
2
)
Temp range (
°C
)
Hardness (Shore D)
Refractive Index
390
50g/250g/1kg
Transparent
250~400
1.03
≤15s
≥12
-50~150
80
1.48~1.51
391
50g/250g/1kg
Transparent
650~1000
1.03
≤15s
≥12
-50~150
80
1.48~1.51
392
50g/250g/1kg
Transparent
1350~1850
1.05
≤15s
≥12
-50~150
70
1.48~1.51
393
50g/250g/1kg
Transparent
2500~3000
1.06
≤15s
≥12
-50~150
65
1.48~1.51
394
50g/250g/1kg
Yellowish
5000
1.1
≤10s
≥12
-50~150
60
/
395
50g/250g/1kg
Transparent
500~800
1.1
≤10s
≥5
-50~150
50
1.53~1.55
3094
50g/250g/1kg
Yellowish
5000~10000
1.06
≤15s
≥12
-50~150
60
/
3011
50g/250g/1kg
Transparent
300
1.04
≤10s
≥2
-50~150
70
1.48~1.51
1High prevail strength and better optical clarity
2Used for bonding,sealing,coating,tacking,fastening and filling
UV ADHESIVE:
UV-curing adhesive is a single component resin based adhesive suitable for bonding a wide range of materials, such as glass, metal, plastic and so on. It has no solvent (solid content 100 percent). It cures rapidly and operates simply. The cured product has high prevail strength and better optical clarity and used for bonding, sealing, fastening and filling.
Useful range:
furniture, handcraft like crystal; optical lens; optical communication coupler; medical device; electric industry; watch industry; liquidcrystal displayer etc.
390 Ultraviolet radiation –UV adhesive
One component, low viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
391 Ultraviolet radiation –UV adhesive
One component, low viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
392 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
393 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup, can adhere glass to stainless steel, aluminium and other metal materials.
394 UV adhesive
One component, high viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing. Light transmittance, used in LCD
395 Ultraviolet radiation –UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup. Used in bonding metal and glass part.
3094 Optical UV adhesive
One component, low viscosity, fast curing. Low odor, high refractive index and light transmittance
Used in bonding optics lens and partial high refractive index LCD
3011 UV adhesive
One component, medium viscosity, high strength. Well resisitence to impact, vibration and solvent, fast curing, fast fixup. Used in bonding the acrylic glass, polycarbonate,etc.
Technical Data:
Item
Packaging
Color
Viscosity (mPa.s)
Density
100W/cm
2
@365nm
Fixture time
Tensile Strength (N/mm
2
)
Temp range (
°C
)
Hardness (Shore D)
Refractive Index
390
50g/250g/1kg
Transparent
250~400
1.03
≤15s
≥12
-50~150
80
1.48~1.51
391
50g/250g/1kg
Transparent
650~1000
1.03
≤15s
≥12
-50~150
80
1.48~1.51
392
50g/250g/1kg
Transparent
1350~1850
1.05
≤15s
≥12
-50~150
70
1.48~1.51
393
50g/250g/1kg
Transparent
2500~3000
1.06
≤15s
≥12
-50~150
65
1.48~1.51
394
50g/250g/1kg
Yellowish
5000
1.1
≤10s
≥12
-50~150
60
/
395
50g/250g/1kg
Transparent
500~800
1.1
≤10s
≥5
-50~150
50
1.53~1.55
3094
50g/250g/1kg
Yellowish
5000~10000
1.06
≤15s
≥12
-50~150
60
/
3011
50g/250g/1kg
Transparent
300
1.04
≤10s
≥2
-50~150
70
1.48~1.51
PU glue, PU binder, PU adhesive for EPDM court
PU binder
adhesive/binder/resine/bonding agent
specially for racetrack
free of toxicity
without strong-smelling
Usage:
The product is applicable to the pavement of the ventilation plastic racetrack and the production of the safety ground mats ,the pavement of stadium and playground. And its weak adhesiveness before the cross-linking hardening will not stick to the tools and instruments and thus will facilitate the construction, reduce the usage of organic solvent and save costs. The superiority of this product lies in its resistance from hardening, high elasticity and rebound rate , making more comfortable to footing on it as well as maintaining sound motility.
Usage Instructions
(1)Dusts and moisture should be removed from cement floor and keep the surface clean and dry.
(2)Pour the EPDM granules and PU binder into the agitator with a definite ratio
(3)Pour the EPDM granules and PU binder into construction site after mixing, then use manual trowel or professional paver to strickle the surface.
(4)Use the ethylacetate solvent to wash the tools.
adhesive/binder/resine/bonding agent
specially for racetrack
free of toxicity
without strong-smelling
Usage:
The product is applicable to the pavement of the ventilation plastic racetrack and the production of the safety ground mats ,the pavement of stadium and playground. And its weak adhesiveness before the cross-linking hardening will not stick to the tools and instruments and thus will facilitate the construction, reduce the usage of organic solvent and save costs. The superiority of this product lies in its resistance from hardening, high elasticity and rebound rate , making more comfortable to footing on it as well as maintaining sound motility.
Usage Instructions
(1)Dusts and moisture should be removed from cement floor and keep the surface clean and dry.
(2)Pour the EPDM granules and PU binder into the agitator with a definite ratio
(3)Pour the EPDM granules and PU binder into construction site after mixing, then use manual trowel or professional paver to strickle the surface.
(4)Use the ethylacetate solvent to wash the tools.
PU (polyurethane foam) foam mattress
Specifications
PU foamFluorine-free, environmental protectionlight weight,high strength,impact resistance, heat insulated
PU foam(polyurethane foam) material
· Fluorine-free, environmental protection
· light weight,high strength,impact resistance ,heat insulation and fire resistance.
· Can be made according to your specified requirement.(density,size,etc)
· Suitable with other different materials as thermal insulation composite panel
PU Technical Indicators
Item
indicator
Standard Size
1220×2440×480mm
Density
3580kg/m3
Thermal conductivity
0.022mW/m2K
Anti-burning properties
5S from self-extinguishing fire
Rate of fireproof
B2
Tensile strength
200kpa
Dimensional stability
70,48H 0.6%
Water absorption
≤2.5% v/v
operating life
30year
PU foamFluorine-free, environmental protectionlight weight,high strength,impact resistance, heat insulated
PU foam(polyurethane foam) material
· Fluorine-free, environmental protection
· light weight,high strength,impact resistance ,heat insulation and fire resistance.
· Can be made according to your specified requirement.(density,size,etc)
· Suitable with other different materials as thermal insulation composite panel
PU Technical Indicators
Item
indicator
Standard Size
1220×2440×480mm
Density
3580kg/m3
Thermal conductivity
0.022mW/m2K
Anti-burning properties
5S from self-extinguishing fire
Rate of fireproof
B2
Tensile strength
200kpa
Dimensional stability
70,48H 0.6%
Water absorption
≤2.5% v/v
operating life
30year
PU Adhesive for running track
1PU Adhesive for racetrack
2High quality polyurethane binder
3Binding rubber granule/racetrack/sports floor etc. to subbase
our pu binder is a necessary part to construct running track,it has two different series and has enjoyed an excellent reputation
moisture curing,solvent free,unpigmented,medium viscosity moisture curing binder based on MDI.make your project with characterisitic of environmental-friendly good elasticity and fast solidify,easy and safe when you construction.
1)PU Adhesive for racetrack
2)High quality polyurethane binder
3)Binding rubber granule/racetrack/sports floor etc. to subbase
Fields of application:
1)Binding rubber granules for running track;
2)Binding prefabricated rubber running track to the subbase;
3)Binding sports floor such as PU courts,rubber floor etc.. to the subbase;
4)It is specially designed for on-site made running track,which is used for binding rubber granules.
Fields of application:
spray coat system running track structural material
Full pu flower spray and self-forming track material
Full pu system running track structural material
Sandwich system running track structural material
PU system sport field structural material
2High quality polyurethane binder
3Binding rubber granule/racetrack/sports floor etc. to subbase
our pu binder is a necessary part to construct running track,it has two different series and has enjoyed an excellent reputation
moisture curing,solvent free,unpigmented,medium viscosity moisture curing binder based on MDI.make your project with characterisitic of environmental-friendly good elasticity and fast solidify,easy and safe when you construction.
1)PU Adhesive for racetrack
2)High quality polyurethane binder
3)Binding rubber granule/racetrack/sports floor etc. to subbase
Fields of application:
1)Binding rubber granules for running track;
2)Binding prefabricated rubber running track to the subbase;
3)Binding sports floor such as PU courts,rubber floor etc.. to the subbase;
4)It is specially designed for on-site made running track,which is used for binding rubber granules.
Fields of application:
spray coat system running track structural material
Full pu flower spray and self-forming track material
Full pu system running track structural material
Sandwich system running track structural material
PU system sport field structural material
PU Adhesive
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
PU Adhesives for Lamination
It has very good moistening property and mechanical operation performance.
This product is a kind of common use lamination glue. Good economical efficiency is its main advantage.Suitable for most laminating machines with various laminating speeds. Both initial and afterwards bond strength of laminated products is very high.
This product is a kind of common use lamination glue. Good economical efficiency is its main advantage.Suitable for most laminating machines with various laminating speeds. Both initial and afterwards bond strength of laminated products is very high.
PU Auto adhesive M-105 PU automobile welding line sealant
PU Auto adhesive M-105 Used in:
1.Sealing the seam between glass and body.
2.Good adhesive
PU Auto adhesive M-105 Characteristics
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
One part no mixing excellent weather proof, aging resistant property
Abrasion able excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Test Parameter
Appearance
Black paste
Surface drying time min
45±2
Solidifying rate mm/24h
3±0.5
Density g/ml
1.2±0.1
Sag(v) ≤ mm
0
Hardness
45±5
Breaking Elongation ≥ %
400
Tensile strength ≥ M pa
3.0
Shearing strength ≥ M pa
3.0
Tearing strength ≥ N/mm
9.0
Store in cold cool, dry place, below25 degree,shelf life is 9 months
1.Sealing the seam between glass and body.
2.Good adhesive
PU Auto adhesive M-105 Characteristics
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
One part no mixing excellent weather proof, aging resistant property
Abrasion able excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Test Parameter
Appearance
Black paste
Surface drying time min
45±2
Solidifying rate mm/24h
3±0.5
Density g/ml
1.2±0.1
Sag(v) ≤ mm
0
Hardness
45±5
Breaking Elongation ≥ %
400
Tensile strength ≥ M pa
3.0
Shearing strength ≥ M pa
3.0
Tearing strength ≥ N/mm
9.0
Store in cold cool, dry place, below25 degree,shelf life is 9 months
PU Foam Cleaner
PU Foam Cleaner/
Expanding Foam Cleaner
digest and remove uncured pu foam
No pungent smell,
pleasant aromatic odor
I-Like PU Foam Cleaner is a unique multi functional cleaner designed to digest and remove uncured pu foam from the majority of gun grade and hand held foam applicators. No pungent smell, pleasant aromatic odor. The volume is 500ml, and the gross weight is 430g
It can be applied both as a gun (applicator) cleaner and a spray cleaner.
Item No.:
ID-104
Can Size
65mm x 195mm H
Package
500ml x 12pcs/ctn
Carton Size
280x210x240 mm
20ft Container Loading
2075 cartons
Expanding Foam Cleaner
digest and remove uncured pu foam
No pungent smell,
pleasant aromatic odor
I-Like PU Foam Cleaner is a unique multi functional cleaner designed to digest and remove uncured pu foam from the majority of gun grade and hand held foam applicators. No pungent smell, pleasant aromatic odor. The volume is 500ml, and the gross weight is 430g
It can be applied both as a gun (applicator) cleaner and a spray cleaner.
Item No.:
ID-104
Can Size
65mm x 195mm H
Package
500ml x 12pcs/ctn
Carton Size
280x210x240 mm
20ft Container Loading
2075 cartons
31 Not contain styrene and non-toxic Epoxy Resin joint filler
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
PU Foam Filler
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
Friday, August 5, 2011
PU Foam Prices
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
PU Foam Sealant for Wood
PU Foam Sealant for Wood
These PU foam sealants for wood are of high quality
PU Foam Sealant for Wood
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
These PU foam sealants for wood are of high quality
PU Foam Sealant for Wood
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
PU Foam Sealant for Wood
These PU foam sealants for wood are of high quality
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg
PU Foam Sealant for Wood
These PU foam sealants for wood are of high quality
PU Foam Sealant for Wood :
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
PU Foam Sealant for Wood :
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
PU Foam Sealant
pu foam sealant
Features:
1) This PU foam sealant is of high quality
2) Reasonable price
pu foam sealant
Our F181 gun-type PU foam is a kind of one-component polyurethane foams, which is
solidified by the moisture in the air. It adopts European advanced technology, plus carefully-chosen raw material and unique producing method, all of which make our PU foam to be stable, strong, hermetic and high quality.
Specifications:
1) Basic component: polyurethane
2) Density: 15 - 27kg/cbm
3) Utmost expanding per 100ml: 5L
4) Tack free time: about 10 minutes
5) Cutting (20mm dia.): about 30 minutes
6) Processing temperature: +5 - +35°C
7) Optimum temperature: +18 - +25°C
8) Lowest processing temperature: 5°C
9) Lowest can temperature: 10°C
10) Adhesiveness: 100 - 160kPa
11) Temperature endurance (long period): -30 - +80°C
12) Temperature endurance (short period): -40 - +110°C
13) Formaldehyde or benzene: no
14) Heat-transmitting index: 0.028 - 0.040W/M.K
15) Anti-erosion: yes
16) Toxicity after cured: no
17) Extended shelf life (keeping straight in 18 - 22°C): 12 months
18) Mounted windows and doorframes
19) Ready for use
20) CFC free
21) With excellent adhesion to most surfaces
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.9kg.
Features:
1) This PU foam sealant is of high quality
2) Reasonable price
pu foam sealant
Our F181 gun-type PU foam is a kind of one-component polyurethane foams, which is
solidified by the moisture in the air. It adopts European advanced technology, plus carefully-chosen raw material and unique producing method, all of which make our PU foam to be stable, strong, hermetic and high quality.
Specifications:
1) Basic component: polyurethane
2) Density: 15 - 27kg/cbm
3) Utmost expanding per 100ml: 5L
4) Tack free time: about 10 minutes
5) Cutting (20mm dia.): about 30 minutes
6) Processing temperature: +5 - +35°C
7) Optimum temperature: +18 - +25°C
8) Lowest processing temperature: 5°C
9) Lowest can temperature: 10°C
10) Adhesiveness: 100 - 160kPa
11) Temperature endurance (long period): -30 - +80°C
12) Temperature endurance (short period): -40 - +110°C
13) Formaldehyde or benzene: no
14) Heat-transmitting index: 0.028 - 0.040W/M.K
15) Anti-erosion: yes
16) Toxicity after cured: no
17) Extended shelf life (keeping straight in 18 - 22°C): 12 months
18) Mounted windows and doorframes
19) Ready for use
20) CFC free
21) With excellent adhesion to most surfaces
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.9kg.
PU Foam Sealants for Wood
ThesePU foam sealants for wood are of high quality
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
Features:
1) Sunrise polyurethane foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg.
PU Foam in Aerosol
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
PU Foam sealant
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
PU Foam sealants
These PU foam sealants for wood are of high quality
Features:
1) Sunrise PU Foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg
Features:
1) Sunrise PU Foam sealant for wood is a new product
researched and developed by our company
2) Higher bonding strength, can tightly agglutinate doorframes and walls
3) Stable foam, can improve fixing effect of wood
4) Can hold strong shake and cushion impact effectively
5) Saves labor cost with fast and convenient installation
6) Basic component: polyurethane
7) Density (kg/m
3
): 15 - 27
8) Tack free time (minutes): about 10
9) Processing temperature (°C): +5 ~ +35
10) Optimum temperature (°C): +18 ~ +25
11) Lowest processing temperature (°C): 5
12) Lowest can temperature (°C): 10
13) Adhesiveness (KPa): 100 - 160
14) Temperature endurance (long time) (°C): -30 ~ +80
15) Temperature endurance (short time) (°C): -40 ~ +110
16) Formaldehyde or benzene: no
17) Heat transmitting index (w/m.k): 0.028 - 0.040
18) Anti- erosion
19) No toxicity after cured
20) Extended shelf life (month): 9
Outer packing:
12 tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.6kg
31 Not contain styrene and non-toxic granite adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)
PU Foam/Auto Insulation Material
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
PU Foam
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35- 100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
One component expanding PU Foam is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices. Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips. It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35- 100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
PU Foam
Adopts German Bayer Technic, more output with stronger foam, no clog guarantee, all seasons application, light biege foam effect
Aristo One-Component Construction PU Foam cures when moisture in the air reacts with the chemistry of the foam, it can be used to economically insulate and fill of large seams, joints and cracks against heat loss, cold, draught, noise and moisture, adhere to all building materials except polyurethane foil, silicone and Teflon.
Application:
Door and window insulation: seal, fill, fix and adhere the gap between doors, windows and walls.
Advertisement model: make model and sand plate, repair show board.
Sound insulation and absorption: insulate and absorb sound as a sealant in speech room and broadcast studio.
Gardening: make ikebana and gardening simple and beautiful.
Daily Maintenance: repair the hole, gap, brick and floor.
Resisting water and fixing leak: mend the hole of water pipe and cloaca.
Packing and transportation: pack valuable and fragile goods easily and quickly, resist shock and press.
Aristo One-Component Construction PU Foam cures when moisture in the air reacts with the chemistry of the foam, it can be used to economically insulate and fill of large seams, joints and cracks against heat loss, cold, draught, noise and moisture, adhere to all building materials except polyurethane foil, silicone and Teflon.
Application:
Door and window insulation: seal, fill, fix and adhere the gap between doors, windows and walls.
Advertisement model: make model and sand plate, repair show board.
Sound insulation and absorption: insulate and absorb sound as a sealant in speech room and broadcast studio.
Gardening: make ikebana and gardening simple and beautiful.
Daily Maintenance: repair the hole, gap, brick and floor.
Resisting water and fixing leak: mend the hole of water pipe and cloaca.
Packing and transportation: pack valuable and fragile goods easily and quickly, resist shock and press.
PU Foam
1Aristo OCF can be used to insulate, seal, bond, fill and stop air infiltration,
2. it meets GB8624-97 flame resistance
Aristo One-Component Foam can be used to economically insulate, seal, bond, fill and stop air infiltration. One-component foams cure when moisture in the air reacts with the chemistry of the foam. All one-component foams meet GB8624-97 flame resisitance requirements for caulks and sealants.
the Applications of pu foam :
1. Door and window installation: seal, fill, fix and adhere the gap between doors, windows and walls.
2. Advertisement model: make model and sand plate, repair show board.
3. Sound insulation and absorption: insulate and absorb sound as a sealant in speech room and broadcast studio.
4. Gardening: make ikebana and gardening simple and beautiful.
5. Daily maintenance: repair the hole, gap, brick and floor.
6. Resisting water and fixing leak: mend the hole of water pipe and cloaca.
7. Packing and Transportation: pack valuable and fragile goods easily and quickly, resist shock and press.
2. it meets GB8624-97 flame resistance
Aristo One-Component Foam can be used to economically insulate, seal, bond, fill and stop air infiltration. One-component foams cure when moisture in the air reacts with the chemistry of the foam. All one-component foams meet GB8624-97 flame resisitance requirements for caulks and sealants.
the Applications of pu foam :
1. Door and window installation: seal, fill, fix and adhere the gap between doors, windows and walls.
2. Advertisement model: make model and sand plate, repair show board.
3. Sound insulation and absorption: insulate and absorb sound as a sealant in speech room and broadcast studio.
4. Gardening: make ikebana and gardening simple and beautiful.
5. Daily maintenance: repair the hole, gap, brick and floor.
6. Resisting water and fixing leak: mend the hole of water pipe and cloaca.
7. Packing and Transportation: pack valuable and fragile goods easily and quickly, resist shock and press.
PU Foam
High expanding yield, Multi-purpose use PU Foam with a remarkable weather resistance, Shelf life: 12 months
ITEM
-R
S
pray PU
F
oam
, which is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure.
PU foam is widely used for filling joints between walls, ceilings, floors and gaps around pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
PU Foam Tag
1. High expending yield
2.Multi-purpose use
3.Dense cell structure
4.remarkable weather resistance
5.Shelf life:12 months
Gorvia expanding PU foam, expands up to 4L (under ideal conditions) from 750ml aerosol can, an additional PU foam gun dispenser is needed to spray (need to buy separately). PU Foam is suitable for sealing bonding, filling and insulating most construction materials. Once the PU Foam cured can be cut, sawn, sanded, painted and plastered over. The PU foam provides a good bond to lumber, plywood, concrete, metals, masonry and other substrates.
Note: For gun type PU foam, an additional foam gun is needed to spray (needs to by separately). In such case, you might also need to buy pu foam cleaner to clean the gun adapter after use.
Also avaliable:
Gun PU foam: RG850, RG800, RG750, RG700, RG24oz, RG20oz, private label
Straw PU foam:RS850, RS800, RS750, RS700, RS24oz, RG20oz, private label
ITEM
-R
S
pray PU
F
oam
, which is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure.
PU foam is widely used for filling joints between walls, ceilings, floors and gaps around pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
PU Foam Tag
1. High expending yield
2.Multi-purpose use
3.Dense cell structure
4.remarkable weather resistance
5.Shelf life:12 months
Gorvia expanding PU foam, expands up to 4L (under ideal conditions) from 750ml aerosol can, an additional PU foam gun dispenser is needed to spray (need to buy separately). PU Foam is suitable for sealing bonding, filling and insulating most construction materials. Once the PU Foam cured can be cut, sawn, sanded, painted and plastered over. The PU foam provides a good bond to lumber, plywood, concrete, metals, masonry and other substrates.
Note: For gun type PU foam, an additional foam gun is needed to spray (needs to by separately). In such case, you might also need to buy pu foam cleaner to clean the gun adapter after use.
Also avaliable:
Gun PU foam: RG850, RG800, RG750, RG700, RG24oz, RG20oz, private label
Straw PU foam:RS850, RS800, RS750, RS700, RS24oz, RG20oz, private label
PU Foaming Sealing
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
Pu Foam spray / Expandable foam/ PU sealant
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick an sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam.
All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants.
We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured ]
foam sticks to hands and clothing.
Specifications:
1)Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption:0.03% volume
10) Thermo conductivity: 0.028 - 0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5-6L
13) Closed cells: 60 - 70%
PU Foams sealant for Winter
PU Foams sealant for Winter:
Can be used in winter with high production and stable foam
PU Foams sealant for Winter :
Features:
1) Sunrise polyurethane foam sealant for winter, which is our new
product, can hold very low temperature, with an excellent expending
effect, thereby lowers the cost, and meets the various demands of
our customers
2) Can be used in winter, the surrounding temperature can be as low
as -10°C
3) High production, stable foam
4) Fast and convenient for use
5) Waterproof, anti-chemical material
6) Can be adhered to various materials but for polyethylene, teflon,
silicone and some grease
7) Unresisting ultraviolet radiation, surface disposal is recommended
8) Gun-type and straw-type, meeting your demands towards high quality
Outer packing:
12tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.5kg
Can be used in winter with high production and stable foam
PU Foams sealant for Winter :
Features:
1) Sunrise polyurethane foam sealant for winter, which is our new
product, can hold very low temperature, with an excellent expending
effect, thereby lowers the cost, and meets the various demands of
our customers
2) Can be used in winter, the surrounding temperature can be as low
as -10°C
3) High production, stable foam
4) Fast and convenient for use
5) Waterproof, anti-chemical material
6) Can be adhered to various materials but for polyethylene, teflon,
silicone and some grease
7) Unresisting ultraviolet radiation, surface disposal is recommended
8) Gun-type and straw-type, meeting your demands towards high quality
Outer packing:
12tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.5kg
PU Foams sealant for Winter
PU Foams sealant for Winter
Can be used in winter with high production and stable foam
PU Foams sealant for Winter
Features:
1) Sunrise polyurethane foam sealant for winter, which is our new
product, can hold very low temperature, with an excellent expending
effect, thereby lowers the cost, and meets the various demands of
our customers
2) Can be used in winter, the surrounding temperature can be as low
as -10°C
3) High production, stable foam
4) Fast and convenient for use
5) Waterproof, anti-chemical material
6) Can be adhered to various materials but for polyethylene, teflon,
silicone and some grease
7) Unresisting ultraviolet radiation, surface disposal is recommended
8) Gun-type and straw-type, meeting your demands towards high quality
Outer packing:
12tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.5kg.
Can be used in winter with high production and stable foam
PU Foams sealant for Winter
Features:
1) Sunrise polyurethane foam sealant for winter, which is our new
product, can hold very low temperature, with an excellent expending
effect, thereby lowers the cost, and meets the various demands of
our customers
2) Can be used in winter, the surrounding temperature can be as low
as -10°C
3) High production, stable foam
4) Fast and convenient for use
5) Waterproof, anti-chemical material
6) Can be adhered to various materials but for polyethylene, teflon,
silicone and some grease
7) Unresisting ultraviolet radiation, surface disposal is recommended
8) Gun-type and straw-type, meeting your demands towards high quality
Outer packing:
12tins/ctn
Carton dimensions: 280 x 215 x 348mm
G.W.: 11.5kg.
PU Glue
pu glue is used in mixing with rubber granules for race track materials
one part glue
one component pu glue
pu adhesive
Feature: The main strength of our company's PU Glue is environmental protection, stable, durable and the raw materials is import.
Instruction:
Colour: Red and Green
SIZE: Colour paste, Glue
Ratio: (1: 2) one piece of right layer colour paste, two pieces of glue
Package: Packing in Iron bucket 20kg/ Iron bucket(colour paste), 200kg/ Iron bucket. (glue)
Application: Plastic runway surface, run track.
Trademark:
TC
Company:
one part glue
one component pu glue
pu adhesive
Feature: The main strength of our company's PU Glue is environmental protection, stable, durable and the raw materials is import.
Instruction:
Colour: Red and Green
SIZE: Colour paste, Glue
Ratio: (1: 2) one piece of right layer colour paste, two pieces of glue
Package: Packing in Iron bucket 20kg/ Iron bucket(colour paste), 200kg/ Iron bucket. (glue)
Application: Plastic runway surface, run track.
Trademark:
TC
Company:
PU Insulation Foam
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
PU adhesive / PU sealant / Caulking
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
PU adhesive / PU sealant / Caulking
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
310ml packing electrical RTV silicone sealant
310ml packing electrical RTV silicone sealant .
1.aging resistance.
2.Do not contain any solvent.
3.non-toxic
310ml packing electrical RTV silicone sealant.
Capability: This product is single group organic silicon in normal temperature. When it is in air, change into elastomer after meet solid air, with a good anti-electricity, anti-wet, could suck buffer and avoid shaking, with high anti-high temperature and low-temperature, and the temperature is:-60- +260degrees Centigrades. This product is non-poisonous, ageing-resistant, won’t leek oil, excellent comprehensive performance. Able to make silicone with different adhesion according to clients request. This glue can apply in various kinds of generality seal of industrial production, such as heat tube, electronic apparatus, cable, machinery, light industry, chemical industry, etc.
Operation instructions:
Clean the surface: Clean the surface or be glued things, to remove the dust mark, the dust and greasy dirt, etc.
The glue construct: Pare and make the most advanced part of front part with the razor blade, to put the sharp mouth in crowd the glue liquid to the already cleaned surface with pushing rifles, glued in the surface and regularly closed up.
Solidification: To well put the part in air, let is solidification for 10-30minutes, complete solidification depends on thickness(2mm thickness, room temperature is 25 degrees centigrade, 50% humidity; complete solidification for 24 hours. Thickness of solidification limit is 5-6mm).
The precautions: After finished, the un-used glue should sealed immediately, in order to use next time. Keep it far away from the fire source as shady and dry place.(Validity: One year at room temperature around 25°C).
type
KG-454R
viscosity pa.s
5-100
Surface curing time min
10-30
Tensile strength Mpa≥
0.8
Tensile stretch %≥
150
Sheating strength Mpa≥
0.7
Racking strength KN/m
3.0
Shaw strength A≥
20
Electrical surface resistivity Ω≥
1×10
14
Electric volume resistivity Ω.cm≥
1×10
14
Dielectric constant 10
6 Hz
≤
3.5
Dielectric power factor 10
6 Hz
≤
5×10
-3
Insulating strength KV/mm≤
15
1.aging resistance.
2.Do not contain any solvent.
3.non-toxic
310ml packing electrical RTV silicone sealant.
Capability: This product is single group organic silicon in normal temperature. When it is in air, change into elastomer after meet solid air, with a good anti-electricity, anti-wet, could suck buffer and avoid shaking, with high anti-high temperature and low-temperature, and the temperature is:-60- +260degrees Centigrades. This product is non-poisonous, ageing-resistant, won’t leek oil, excellent comprehensive performance. Able to make silicone with different adhesion according to clients request. This glue can apply in various kinds of generality seal of industrial production, such as heat tube, electronic apparatus, cable, machinery, light industry, chemical industry, etc.
Operation instructions:
Clean the surface: Clean the surface or be glued things, to remove the dust mark, the dust and greasy dirt, etc.
The glue construct: Pare and make the most advanced part of front part with the razor blade, to put the sharp mouth in crowd the glue liquid to the already cleaned surface with pushing rifles, glued in the surface and regularly closed up.
Solidification: To well put the part in air, let is solidification for 10-30minutes, complete solidification depends on thickness(2mm thickness, room temperature is 25 degrees centigrade, 50% humidity; complete solidification for 24 hours. Thickness of solidification limit is 5-6mm).
The precautions: After finished, the un-used glue should sealed immediately, in order to use next time. Keep it far away from the fire source as shady and dry place.(Validity: One year at room temperature around 25°C).
type
KG-454R
viscosity pa.s
5-100
Surface curing time min
10-30
Tensile strength Mpa≥
0.8
Tensile stretch %≥
150
Sheating strength Mpa≥
0.7
Racking strength KN/m
3.0
Shaw strength A≥
20
Electrical surface resistivity Ω≥
1×10
14
Electric volume resistivity Ω.cm≥
1×10
14
Dielectric constant 10
6 Hz
≤
3.5
Dielectric power factor 10
6 Hz
≤
5×10
-3
Insulating strength KV/mm≤
15
PU Insulation
1) 750ml
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
PU adhesive / PU sealant / Caulking
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
2) CFC free
3) Large expansion capacity
4) Best price and quality
5) Fast delivery and good service
PU adhesive / PU sealant / Caulking
is a multi-purpose polyurethane foam
that may be used for a wide range of building applications, such as
filling gaps around pipes, draft proofing and sealing window and door
frames, bonding wood and brick and sealing cracks and crevices.
Adhesion
is good to most construction surfaces, such as wood, brick, concrete,
metals and many plastics. When cured it is weather and rot proof and
can be trimmed, sawn, sanded and, if necessary, painted and plastered.
PU foam will cure when moisture in the air reacts with the chemicals
of the foam. All one-component foams meet GB8624-97 flame resistance
requirements for caulks and sealants. We occupy 60-70% of the domestic
market and are one of the largest suppliers in Asia.
Guide for use:
It can be applied to damp surfaces. OCF is moisture curing. The more
moisture, the quicker the cure. It must be protected from Uvin external
application to prevent discoloration and deterioration of the foam.
Conventional paints can be applied to the foam. In overhead applications,
foam must be retained in place to prevent its falling away until adhesion
grips.
It can be used in temperature range of 5-40
o
C, if in
low temperature condition, we suggest that it should be placed in
25-30
o
C circumstance for 30 minutes to ensure the better
performance.
Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically (sanded or scraped off). Uncured
foam sticks to hands and clothing.
Specifications:
1) Storage life: 12 months when stored at 20
o
C
2) 12 or 15 cans/carton
3) Density: 14 to 30kg/m
3
4) Adhesive strength: PVC-PVC: 143kPa
5) Aluminum plates: 133kPa
6) Elongation at break: 8-20%
7) Shear strength: 22-50kPa
8) Compression strength 35-100kPa at 10% compression
9) Water absorption: 0.03% volume
10) Thermo conductivity: 0.028-0.038W/(m.k)
11) Tack free time: 12mins at 23
o
C/50%RH
12) Yield per 100 ml: 5 - 6L
13) Closed cells: 60 - 70%
PU Multipurpose adhesive M-104 multipurpose PU sealant
PU Multipurpose adhesive Used in:
automobile, railway passenger truck and refrigeration car's welding line sealing
Good adhe
PU Multipurpose adhesive M-104 Characteristics
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
One part no mixing excellent weather proof, aging resistant property
Abrasion able excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Technical Data:
Appearance
White, grey, black paste
Surface drying time min
30±2
\Solidifing rate mm/24h
3.5±0.5
Density g/ml
1.2±0.1
Sag(v) ≤ mm
0
Hardness
40±5
Breaking Elongation ≥ %
450
Tensile strength ≥ Mpa
2.0
Shearing strength ≥ Mpa
1.8
Tearing strength ≥ N/mm
9.0
Application
a.automobile, railway passenger truck and refrigeration car's welding line sealing
b.car and ship windows fix sealing
Store in cold cool, dry place, below25 degree,shelf life is 9 months
automobile, railway passenger truck and refrigeration car's welding line sealing
Good adhe
PU Multipurpose adhesive M-104 Characteristics
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
One part no mixing excellent weather proof, aging resistant property
Abrasion able excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Technical Data:
Appearance
White, grey, black paste
Surface drying time min
30±2
\Solidifing rate mm/24h
3.5±0.5
Density g/ml
1.2±0.1
Sag(v) ≤ mm
0
Hardness
40±5
Breaking Elongation ≥ %
450
Tensile strength ≥ Mpa
2.0
Shearing strength ≥ Mpa
1.8
Tearing strength ≥ N/mm
9.0
Application
a.automobile, railway passenger truck and refrigeration car's welding line sealing
b.car and ship windows fix sealing
Store in cold cool, dry place, below25 degree,shelf life is 9 months
PU SEALANT791
PU 791 is one-part room temperature curing polyurethane with high adhesion strength
Description
PU 791 is one-part room temperature curing polyurethane with high adhesion strength, good elasticity, aging resistant, vibration exhaustion resistant, low temperature resistant and multi coatings paint able and easy application properties.
Where to use
It is special used on bonding and sealing on the production line and in the repair shop for automotive, train, trucks like cool storage, container, like roof bonding, body panel bonding, flooring bonding and sealing and so on. It also is used for refrigerator house, ships, pipe and construction usage.
Characteristic
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
Good water proof Paint able
One part no mixing Excellent weather proof, aging resistant property
Abrasion able Excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Anti mildew
Technical Data
No
Item
Standard
Test method
1
Appearance
Black, gray, white paste
By eyes
2
Specific gravity, g/cm3
1.2±0.2
GB14683-1997
3
Hardness, Shore A
50-60
GB/T531-1999
4
Sagging
No
By eyes
5
Tack free time, Min
10-85
By touching
6
Curing rate,mm/24h
2-4
100*10*12 triangle
7
Shear strength,Mpa
≥2.0
GB/T529-1999
8
Tensile strength,Mpa
≥4.0
GB/T528-1998
9
Elongation at break,%
≥400
GB/T528-1998
10
Modulus at 100% elongation,Mpa
1.4-2.5
GB/T528-1998
11
Tear strength,Mpa
≥7.0
GB/T529-1999
12
Solid content,%
≥96
GB14683-1997
Packaging
Packing310ml aluminum cartridge,300ml, 400ml and 600ml sausage. 250kgs bulk by drum;
Storage
At 5~25 centigrade shady, dry place, 12 months of shelf life.
Technical Service
Full support for customer in Technology
Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Commonly no need for primer. Primer could be recommended in order for best performance. If using primer, smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
PU 791don't need mixing and use directly.
Spreading
Spread PU 791 on base material with enough pressure and thickness not less than 1 millimeter.
Note
Full cure (dry 7 days under 20) for PU 791 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang's technician.
Application temperature is between 5 and 35 .
Paint Able Property
PU 791 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm.
Anti Fire
PU 791 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor.
Description
PU 791 is one-part room temperature curing polyurethane with high adhesion strength, good elasticity, aging resistant, vibration exhaustion resistant, low temperature resistant and multi coatings paint able and easy application properties.
Where to use
It is special used on bonding and sealing on the production line and in the repair shop for automotive, train, trucks like cool storage, container, like roof bonding, body panel bonding, flooring bonding and sealing and so on. It also is used for refrigerator house, ships, pipe and construction usage.
Characteristic
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
Good water proof Paint able
One part no mixing Excellent weather proof, aging resistant property
Abrasion able Excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Anti mildew
Technical Data
No
Item
Standard
Test method
1
Appearance
Black, gray, white paste
By eyes
2
Specific gravity, g/cm3
1.2±0.2
GB14683-1997
3
Hardness, Shore A
50-60
GB/T531-1999
4
Sagging
No
By eyes
5
Tack free time, Min
10-85
By touching
6
Curing rate,mm/24h
2-4
100*10*12 triangle
7
Shear strength,Mpa
≥2.0
GB/T529-1999
8
Tensile strength,Mpa
≥4.0
GB/T528-1998
9
Elongation at break,%
≥400
GB/T528-1998
10
Modulus at 100% elongation,Mpa
1.4-2.5
GB/T528-1998
11
Tear strength,Mpa
≥7.0
GB/T529-1999
12
Solid content,%
≥96
GB14683-1997
Packaging
Packing310ml aluminum cartridge,300ml, 400ml and 600ml sausage. 250kgs bulk by drum;
Storage
At 5~25 centigrade shady, dry place, 12 months of shelf life.
Technical Service
Full support for customer in Technology
Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Commonly no need for primer. Primer could be recommended in order for best performance. If using primer, smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
PU 791don't need mixing and use directly.
Spreading
Spread PU 791 on base material with enough pressure and thickness not less than 1 millimeter.
Note
Full cure (dry 7 days under 20) for PU 791 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang's technician.
Application temperature is between 5 and 35 .
Paint Able Property
PU 791 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm.
Anti Fire
PU 791 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor.
PU Sealant KT12 adhesive
KT12 is a one-component adhesive
and sealing compound of permanent elasticity.
KT11 is a one-component adhesive
and sealing compound of permanent elasticity.It is based on a special moisture-cured polyurethane with an accelerated curing time.
Uses
KT 12 is widely used for sealing all joints for buildings.
Moving joints:
*Precast concrete
*Balcony wall column
*Bridge cantilever
*Retaining wall
*Underground subway
Filling joints
*Windows and doors
*Any curtain wall gap except glass walls
*Parapet wall
*Wall/floor joints
*Shutter House
Advantages
*Excellent adhesion with former cleaned sealant
*Single Component, ready-to-use
*Excellent performance,easy to use
*High adhesion strength with all base materials
*Fast cure rate.
*Light weight construction material
*Good weathering resistance and high durability.
*No pollution
*Can be painted.
Instructions for use
Surface preparation
Keep surface clean. Clean all dirty, dust, loose particles and paint. Joints can be cleaned by compressed air. The filling material in the joints must be polythene.
Priming
Use specified primer on concrete and porous surface.
Application
*Stick protecting adhesive tape on both sides of the joints.
*Insert filling materials.
*Use the sealant with manual caulking gun or aerodynamic caulking gun. Horizontal seal can be finished by spatula.
*Smooth with synthesized cleaner mixed by clean water if necessary.
*Tear off the protecting adhesive tape befor the sealant is curing.
*Clean all the tools after operating. The curing materials can be only cleaned by machinery methods.
Joint design
For the successful sealing of joints with ST12, it is essential that the following guidelines on joint configuration are observed:
General Use: for joints up to 10mm wide, width to depth ratio=1:1
for joints over 10mm wide, width to depth ratio=2:1
To ensure that the correct width to depth ratio is achieved and to provide a firm backing against which the sealant can be tooled off and also to prevent the sealant from adhering to the bottom of the joint, the space under the ST12 must be filled with a tight fitting,non-rotting,non-absorbent backing material ,such as closed cell
PE backer.
Expansion joint design criteria:
for joints up to 10mm wide, width to depth ratio=1:1
for joints from 10mm to 40mm, width to depth ratio=1:0.5
Note:1. For the corners of the concrete joint are usually very fragile,they must be made bevel or concave.
2The bottom of the joints should allow the deformation of the sealant,or it will cause damage after the joints are put to use.
3The sealed depth of the joints should be altered by inserting suitable backing materials.
Technical Data (Typical)
KT-12LM
KT-12MM
KT-12HM
Colours
Gray,White,Black
Density
1.30-1.40kg/L
Tack free time
45-120mins, depending on weather
Curing Rate
≥2MM/24h
Hardness,Shore A
20±5
30±5
40±5
Modulus100% Elongation
<0.4MP
0.4-0.6MPa
>0.6MPa
Tensile Strength
≥1.2 Mpa
>1.8 Mpa
>2.4 Mpa
Elastic Recovery
>70%
>70%
>80%
Elongation at break
>800%
>800%
>800%
Tearing Strength
>8N/mm
>11N/mm
>11N/mm
Application Temperature
5-40
Service Temperature
-40-+80(maximum 50 in hot water)
Shelf life
9 months stored dry below 30 unopened in original containers
Packaging : 400ml or 600ml unipac per carton of 20.
and sealing compound of permanent elasticity.
KT11 is a one-component adhesive
and sealing compound of permanent elasticity.It is based on a special moisture-cured polyurethane with an accelerated curing time.
Uses
KT 12 is widely used for sealing all joints for buildings.
Moving joints:
*Precast concrete
*Balcony wall column
*Bridge cantilever
*Retaining wall
*Underground subway
Filling joints
*Windows and doors
*Any curtain wall gap except glass walls
*Parapet wall
*Wall/floor joints
*Shutter House
Advantages
*Excellent adhesion with former cleaned sealant
*Single Component, ready-to-use
*Excellent performance,easy to use
*High adhesion strength with all base materials
*Fast cure rate.
*Light weight construction material
*Good weathering resistance and high durability.
*No pollution
*Can be painted.
Instructions for use
Surface preparation
Keep surface clean. Clean all dirty, dust, loose particles and paint. Joints can be cleaned by compressed air. The filling material in the joints must be polythene.
Priming
Use specified primer on concrete and porous surface.
Application
*Stick protecting adhesive tape on both sides of the joints.
*Insert filling materials.
*Use the sealant with manual caulking gun or aerodynamic caulking gun. Horizontal seal can be finished by spatula.
*Smooth with synthesized cleaner mixed by clean water if necessary.
*Tear off the protecting adhesive tape befor the sealant is curing.
*Clean all the tools after operating. The curing materials can be only cleaned by machinery methods.
Joint design
For the successful sealing of joints with ST12, it is essential that the following guidelines on joint configuration are observed:
General Use: for joints up to 10mm wide, width to depth ratio=1:1
for joints over 10mm wide, width to depth ratio=2:1
To ensure that the correct width to depth ratio is achieved and to provide a firm backing against which the sealant can be tooled off and also to prevent the sealant from adhering to the bottom of the joint, the space under the ST12 must be filled with a tight fitting,non-rotting,non-absorbent backing material ,such as closed cell
PE backer.
Expansion joint design criteria:
for joints up to 10mm wide, width to depth ratio=1:1
for joints from 10mm to 40mm, width to depth ratio=1:0.5
Note:1. For the corners of the concrete joint are usually very fragile,they must be made bevel or concave.
2The bottom of the joints should allow the deformation of the sealant,or it will cause damage after the joints are put to use.
3The sealed depth of the joints should be altered by inserting suitable backing materials.
Technical Data (Typical)
KT-12LM
KT-12MM
KT-12HM
Colours
Gray,White,Black
Density
1.30-1.40kg/L
Tack free time
45-120mins, depending on weather
Curing Rate
≥2MM/24h
Hardness,Shore A
20±5
30±5
40±5
Modulus100% Elongation
<0.4MP
0.4-0.6MPa
>0.6MPa
Tensile Strength
≥1.2 Mpa
>1.8 Mpa
>2.4 Mpa
Elastic Recovery
>70%
>70%
>80%
Elongation at break
>800%
>800%
>800%
Tearing Strength
>8N/mm
>11N/mm
>11N/mm
Application Temperature
5-40
Service Temperature
-40-+80(maximum 50 in hot water)
Shelf life
9 months stored dry below 30 unopened in original containers
Packaging : 400ml or 600ml unipac per carton of 20.
Subscribe to:
Posts (Atom)