Large plate glass aquarium structural sealant

high strength and high elongation , fast cuing speed ,large bonding power excellent weathering and ageing resistance.
FENGBA6000Large plate glass aquarium

structural sealant is one component room temperature high strength and high elongation acetic curing silicone sealant, fast cuing speed ,large bonding power ,having excellent weathering and ageing resistance .The performance change less within the range between -50°C and 150°C.

APPLICATION
Mainly used in dotted joint sealing on glass curtain wall;
Bonding and sealing on large plate glass, fishbowl, light roof, glass members;
Structural sealing on transparent glass curtain wall members;
Bonding and sealing on all kinds of aluminum doors and windows, and glass parts.

COLORS
FENGBA6000Large plate glass aquarium

structural sealant is available in black, gray, white or other colors on request.

Li-battery assembling adhesive(glue), silicone sealant

Li-battery assembling adhesive are A and B component, fast curing, the majority of material on the highly adhesive
Li-battery assembling adhesive are A and B component, fast curing, the majority of material on the highly adhesive

LiCoO2 Powder

LiCoO2 Powder for Li-ion battery Cathode 200g/bag vacuum sealed in plastic bag


Specifications:

Item
Unit
Content

Composition
Ni
%
≤0.1
Fe
%
≤0.02
Na
%
≤0.02
Ca
%
≤0.02
Cu
%
≤0.01

Metallic impurity
ppb
≤25

Particle distribution
D10
μm
3.0 ~5.0
D50
μm
7~10
D90
μm
≤20
D
max
μm
≤50
Moisture
%
≤0.08
Specific Area
m
2
/g
0.2~0.7
Tap density
g/cm
3

≥2.1


Please click picture below to see XRD , SEM and partcle distribution

Lica-300 injection mortar/anchor adhesive/adhesive manufacturers

Lica-300 injection mortar/adhesive for railway construction/epoxy mortar/adhesive for anchoring
Application: anchoring
Product:Lica-300 injection mortar/adhesive for railway construction/epoxy mortar/adhesive for anchoring
Material: Modified epoxy resin two components with gray color
V: 385ML


Application:
1) Rail transportation application

Lica-300 injection mortar/anchor adhesive

Product: Lica-300 injection mortar/chemical adhesive
Attach application picture
Product: Lica-300 injection mortar/adhesive mortar/chemical adhesive
Material: Improved epoxy resin two components with gray color
V: 385ML


Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen

Lica-300 injection mortar/chemical adhesive

Lica-300 injection mortar/epoxy resin/injection adhesive/anchoring adhesive/chemical producer
Application: anchoring

Product:
Lica-300 injection mortar/epoxy resin/injection adhesive/anchoring adhesive
Material: Improved epoxy resin two components with gray color
V: 385ML

Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen


Chemical reaction time:
(°C)
Surrounding temperature
Adhesive frozen time T1
Initial curing time T2
Full curing time T3
-5°C
4hr
24hr
120hr
0°C
2hr
18hr
96hr
10°C
1hr
9hr
72hr
20°C
30min
6hr
48hr
30°C
20min
4hr
36hr
40°C
12min
2hr
24hr

272 red Threadlocker adhesive

Provides a fast cure on most surface,including received asteners
withands temperature up to 230*C
272 Threadlocking adhesive:
high temperature,high strength
withands temperature up to 230°C
for locking and sealing the thread of cylinderwithout being cleaned
provides a fast cure on most surface,including unwashed fasteners.
recommended for bolts up to M36,heating and hand tools required for disassemble.
Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Prevail torque(N.m)
Break Torque(N.m)
Gap fill(mm)
Temperature range(°c)
Fixture time/Full cure time
222
10ml/50ml/250ml
Purole
1200/5000Thixotropic
4.0
6
0.13
-50~150
20min/24hrs
242
10ml/50ml/250ml
Blue
1200/6000Thixotropic
4.8
12
0.13
-50~150
20min/24hrs
243
10ml/50ml/250ml
Blue
2250/8000Thixotropic
7.0
20
0.13
-50~150
20min/24hrs
262
10ml/50ml/250ml
Red
1800/5000Thixotropic
22
22
0.13
-50~150
20min/24hrs
271
10ml/50ml/250ml
Red
500
31
25
0.13
-50~150
20min/24hrs
272
10ml/50ml/250ml
Red
6000
25
23
0.25
-50~230
30min/24hrs
277
10ml/50ml/250ml
Red
7000
32
32
0.25
-50~150
30min/24hrs
290
10ml/50ml/250ml
Green
12
29
10
0.10
-50~150
20min/24hrs

Lica-300 injection mortar/construction chemicals

Lica-300 injection mortar/construction chemicals
Mainly apply for anchor or rebar fixing
Product: Lica-300 injection mortar/high quality adhesive for construction/construction chemicals
Material: Improved epoxy resin two components with gray color
V: 385ML


Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen

Lica-300 has been used on Peiking-Shanghai High Speed Railway construction

Lica-300 has passed Grade A testing report, Non-poisonous testing report, Mechanical testing report, etc. All specification can meet your need

The result after two million times fatigue loading

Inspection Item
Result
Anchor adhesive
Non-cracking Non-destroy
Insert bolt
Non-slipping
Concrete border
Non-destroy
Mortar layer
Non-breaking



Please contact for further information

Lica-300 injection mortar/constructive adhesive

Product: Lica-300 injection mortar/constructive adhesive
For railway construction/anchoring/fix rebar
Product: Lica-300 injection mortar/high quality adhesive for railway construction
Material: Modified epoxy resin two components with gray color
V: 385ML


Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen

For railway construction:

Lica-300 injection mortar/injection grout

Lica-300 injection mortar/injection grout
Mainly apply for anchoring or fixing rebar

Product:
Lica-300 injection mortar/injection grout/chemical adhesive/epoxy resin/injection adhesive
Material: Improved epoxy resin two components with gray color
V: 385ML

Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen

Advantage:
1:High bonding capability, widely applied to any screw and sleeve, same effect with preburied structure

2:Perfect durability, anti-corrosion and anti-fatigue

3:Without styrene and ethylenediamine, correspond with requirement of non-poisonous and sanitation

4:Non-swelling stress rebar, suitable for short edge and space distance installation

5:Not affected by atrocious environment, perform well even with the smooth hole or in hot weather

6:Light grey adhesive, ensure the beauty of concrete surface
7:Hard cartridge package, much safer by storage and transportation, without bursting

Chemical reaction time:
(°C)
Surrounding temperature
Adhesive frozen time T1
Initial curing time T2
Full curing time T3
-5°C
4hr
24hr
120hr
0°C
2hr
18hr
96hr
10°C
1hr
9hr
72hr
20°C
30min
6hr
48hr
30°C
20min
4hr
36hr
40°C
12min
2hr
24hr

Lica-300Injection mortar/adhesive for steel rebar setting/chemical suppliers

Product: Lica-300Injection mortar/adhesive for bridge construction/chemical suppliers
Nanjing Hitech Composites Co.,Ltd is main chemical supplier
Product: Lica-300Injection mortar/adhesive for bridge construction
Material: Modified epoxy resin two components with gray color
V: 385ML


Application:
1) Rail transportation application
2)Heavy loading fixation
3)Caulking cover board, stair anchoring
4)Repaving coat of concrete and structural point anchoring
5)Steel structure, storing system, anti-collision fence, conveyor belt system, sound insulation screen

adhesive for bridge construction:(as picture)

Light Yellow Hot Melt Adhesive For Tapes

Hot Melt Adhesive For Tapes
Applied to Kraft paper packing tapes, double tapes, cloth substrate tapes, sponge adhesive tapes
Product Name
Hot Melt PSA
Product Model
XY-701
Application Range
Applied to Kraft paper packing tapes, double tapes, cloth substrate tapes, sponge adhesive tapes
Appearance and Packing
principal component
butyl rubber
Appearance
Light yellow transparent Solid
solid component
100%
Odor
Inodorous
Toxicity
Non-toxic
Packing Model
lumps packed by Release Paper, with each weight of 5KG, net weigh of each carton is 20KG.
Physical Property
item
Requirement value
Use instrument
Citing standard
softening point
75±5°C
softening point tester
GB/T 15332-94
fusion viscosity
(160°C)
6000±500mpa.s
Brinell Viscosity apparatus
GB/T 2794
initial stickiness
12#
Initial Stickiness tester
GB/T 4852
adhesion force
24hours
adhesion force tester
GB/T 4851
180
0
peeling force
20±1N/25mm
Electron stripping tester
GB/T 2972
test block specification
test block backing
50um PET
/ coating thickness
35g/sqm
Operation temperature
150
°C
~
180
°C
.
Exudation quality
At the constant temperature 60°C
, no exudation for 48 hours .

Light color and transparent liquid Accelerator K-54 for epoxy flooring coatings and adhesives

AcceleratorK-54
1.light color, high viscosity,
2.as accelerator
3.fast curing
4.can be applicable to the fast-curinghardener

light color and transparent liquid accelerator K-54


Name:
K-54
Color (Garlock): ≤3
Viscosity(77ºF): 120-250
Density (77ºF):0.97-0.99
water content: ≤0.25%
Discraption:
The molecular structure of
Accelerator

K-54
Contains Phenolic Hydroxyl Group ,that increased the activity so that it can be applicable to the fast-curing hardener and accelerator.
solidifying environment:
room temperature
Additonal
Bisphenol-A Epoxy resin 100g (EEW: 190 ),the mixed amount is about 10-12g as hardener and 1-5g as accelerator.





Application:
Mainly used for the hardener of thermosetting epoxy resin ,adhesives,can be used as a accelerator in combination with Anhydride and acylamine curing agent.It is also used for epoxy resin electronic encapsulation materials ,packaging materials and the accelerator in epoxy flooring coatings.
Storage:
Seal in original packing containers.

Put in dry places of 0-40°C(cannot below 0°C).

Keep away from sunshine.





Packeage : 200lg/ Drum

For more informaton and details ,please visit our company website : www.gz-rich.com
www.gz-rich.en.alibaba.com

Lignin fiber for Construction

Lignin fiber for Construction
1.Color Gray
2.Length all 6mm max
3.Ash content 18%max
4.PH value 7.0 0.5
Lignin fiber for Construction

Appearance:


Specifications:
ITEM
FB-200
FB-500
FH-500
FH-900
FH-1000
ASSAY
95%
95%
95%
95%
95%
PH VALUE
6.5
7.0
7.0
7.0
7.0
DENSITY
25g/L~30g/L
25g/L~30g/L
45g/L~52g/L
25g/L~30g/L
20g/L~25g/L
LONGTH
200um
500um
500um
850-900um
1000um
Water Absorptance
4.5
4.8
4.5
5.0
6.0
Appaerance
White
White
Gray or white
Gray
Gray
Decentrality
99.5%
97%
97%
95%
92%


Effect :

1. It is insoluble in water, acid and alkaline solution; PH value is neutral, can improve the corrosion resistance of the system.

2. Proportion of small, large surface area, with good insulation, heat insulation, sound insulation, insulation and air permeability, thermal expansion is not even afford to crack the shell; higher wet film strength and coverage results.

3. It has excellent flexibility and dispersion, a mixture of three-dimensional network structure, enhancing the strength and durability to support the system, can improve system stability, strength, density and uniformity.

4. It has structural viscosity,keep the uniformity of pre-processed slurry (wet and dry material) and reduce the shrinkage and expansion of the system.
5. It has a strong frost and heat capacity, when the temperature reaches 150 °C insulate to a few days; When the temperature reaches 200 °C insulate to dozens of hours; when over 220 °C can be insulated for several hours.

Lignin fiber for concrete

1.Color Gray
2.Length all 6mm max
3.Ash content 18%max
4.PH value 7.0 0.5

ITEM
FB-200
FB-500
FH-500
FH-900
FH-1000
ASSAY
95%
95%
95%
95%
95%
PH VALUE
6.5
7.0
7.0
7.0
7.0
DENSITY
25g/L~30g/L
25g/L~30g/L
45g/L~52g/L
25g/L~30g/L
20g/L~25g/L
LONGTH
200um
500um
500um
850-900um
1000um
Water Absorptance
4.5
4.8
4.5
5.0
6.0
Appaerance
White
White
Gray or white
Gray
Gray
Decentrality
99.5%
97%
97%
95%
92%


Effect :

1. It is insoluble in water, acid and alkaline solution; PH value is neutral, can improve the corrosion resistance of the system.

2. Proportion of small, large surface area, with good insulation, heat insulation, sound insulation, insulation and air permeability, thermal expansion is not even afford to crack the shell; higher wet film strength and coverage results.

3. It has excellent flexibility and dispersion, a mixture of three-dimensional network structure, enhancing the strength and durability to support the system, can improve system stability, strength, density and uniformity.

4. It has structural viscosity,keep the uniformity of pre-processed slurry (wet and dry material) and reduce the shrinkage and expansion of the system.
5. It has a strong frost and heat capacity, when the temperature reaches 150 °C insulate to a few days; When the temperature reaches 200 °C insulate to dozens of hours; when over 220 °C can be insulated for several hours.

Line Marker

Line Marker
for parking lot division
weather resistant
1 bottle for 75-110m
6-12cm width strips
Line Marker
for parking lot division
weather resistant
1 bottle for 75-110m
6-12cm width strips
Captain Line Marking Paint (Line Marker) is ideal for creating parking lot division, indicating danger zone, marking areas visible such as zones for installing, evacuating or performing maintenance produres. Very resistant to weather and chemical agents. Can be used on many surfaces such as concrete, asphalt, glass, wood, synthetic materials. One 750ml bottle draws between 75-110m, depending on the type of coverage desired. Hi-precision strips between 6-12cm wide can be achieved, depending on the setting. Length varies according to the speed of application and surface texture.



Item No.:
ID-209
Can Size
65mm x 300mm H
Package
750ml x 12pcs/ctn
Carton Size
275x205x350 mm
20ft Container Loading
1300 cartons




Line Marker

Lionbond T2-70 Anaerobic Sealant

LiONBOND T2-70 high quality anaerobic adhesives/sealant for thread locking.
LiONBOND T2-70 is an Anaerobic formulation designed to be used on parts in a clean condition. As received parts can give reduced strengths, such as those with protective films (oils) etc.
APPLICATIONS
LiONBOND T2-70 is designed for direct application onto parts where a clean studbolt or blind hole exists. Light oily films, or where surrounding parts contamination is a problem in maintenance can be accommodated.

277 PU Threadlocker sealant

Withstands temperatures up to 230*C
Container: 10ml/50ml/250ml
high strength,high viscosity.excellent chemicals resistance
277 Threadlocking adhesive:
high strength,high viscosity.excellent chemicals resistance.
for permanent locking and sealing bolts up to M36
prevent rust and corrosion of threaded fasteners.
heating and hand tools required for disassemble.

Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Prevail torque(N.m)
Break Torque(N.m)
Gap fill(mm)
Temperature range(°c)
Fixture time/Full cure time
222
10ml/50ml/250ml
Purole
1200/5000Thixotropic
4.0
6
0.13
-50~150
20min/24hrs
242
10ml/50ml/250ml
Blue
1200/6000Thixotropic
4.8
12
0.13
-50~150
20min/24hrs
243
10ml/50ml/250ml
Blue
2250/8000Thixotropic
7.0
20
0.13
-50~150
20min/24hrs
262
10ml/50ml/250ml
Red
1800/5000Thixotropic
22
22
0.13
-50~150
20min/24hrs
271
10ml/50ml/250ml
Red
500
31
25
0.13
-50~150
20min/24hrs
272
10ml/50ml/250ml
Red
6000
25
23
0.25
-50~230
30min/24hrs
277
10ml/50ml/250ml
Red
7000
32
32
0.25
-50~150
30min/24hrs
290
10ml/50ml/250ml
Green
12
29
10
0.10
-50~150
20min/24hrs

Lipstick tube hot melt adhesive of thermoplastic adhesive

1Applicable scope and materials: metal, plastic, rubber
appearance:pillow-shaped white particles
operating temperature:150 D.

The white solid hot melt adhesive for bonding plastics and outer mirror, cosmetic bottles and packaging from the fixed-effects and make-up bottle with hot melt adhesive PE film.
Have some features of
colorless, odorless, strong bonding, holding viscosity, high temperature, environmental protection and non-toxic. Low temperature performance and excellent high temperature performance, spray effect, not drawing, and
good bond strength.
With competitive price,
product performance are widely praised by the customers!

Liquid Surface Glue

Liquid Surface Glue:
Fast hardening.
Can be treated in cold weather.
Non hand sticky after cured.
Good adhesion.
1.liquid s
urface glue characteristics:
Fast hardening, gel time 3~6 minutes at room femperature, after 120minutes the treated parts can be further proceeded;Can be treated in cold weather;Non hand sticky after cured;Good adhesion, working properties (grinding, milling, drilling), easilypolishable.
2.Application:
Filling, patching, bonding and restoration of nature and cast stones,ceramics and porcelain tile.

3.Technical data:
Serialnumber
Item
Technical indexes
1
Pressing shear Stone
Standard
≥9Mpa
Water immersion
≥6Mpa
Heating
≥9Mpa
Freeze-thaw
≥5Mpa
2
Dangerous substance Content
voc content
≤250g/L
benzene
Not available
Toluene & xylene
Not available
formaldehyde
Not available

4.Direction:
Add 1 to 3g of hardener to 100g of filler for filling, bonding andlaminating after mixing both components thoroughly.

5.Attention:
Clean tools immediately after application, Clean with acetone ifnecessary;Safety rules of person protecion, wearing suitable gloves, glasses orscreen for face.and asure suitable local ventilation of work places;Rinse with water immeditaly in case of contact with eyes and skinsand appeal to doctor in serious case.
6.Storage and transportation:
Shelf life is approximately one year if stored in a dry and cool placeits tightly closed original container;Non-dangerous goods, avaible fo various transporation.
7.Production standard:
JC/T 989-2006
8.Management System:
The products have passed the International authentication of theISO9001: 2000 "quality management system" and ISO14001: 2004"Environmental Management System".
9.Announcement:
The above information is based on the latest stage of technical progressand merely take responsibility for this product . .It is to be considered asa non-binding hint and dose not release the user from a performance test,since application ,processing and environment influences are beyond our realm of control.

Liquid Tire Sealant

Fast seal to puncture
No rust to rimSeal puncture up to 6mm
Non-Toxic, Non-flammable
Detailed Product Description

Item No.:
ID-502
Can Size:
65mm x 160mm H
Package:
500ml x 24pcs/ctn
Carton Size:
415x275x187 mm
20ft Container Loading

Features:
It is made of organic polymer materials, which is neutral and is of no corrosion to metals or rubber.
Added one time into the tyre and Stops up to 60 leakages.
It can cover the breach within 6mm.
Good leveling to automatically seek-out the leakage in seconds.
No volatile, non-flammable, anti-freezing. Long lasting effect.


Package:


Item No.:
ID-502
Can Size:
65mm x 160mm H
Package:
500ml x 24pcs/ctn
Carton Size:
415x275x187 mm
20ft Container Loading
1340 cartons



Operation Procedures:
1. Open the valve of tyre, fill this Magic Tyre Sealer into the tyre.
2. Close the valve of tyre, and turn the tyre running for a few minutes.
3. Pump the tyre. Slowly drive 1-2km, and the punctures will be automatically bonded.
4. 125ml-250ml for bicycles; 200ml-350ml for motorcycles; 500ml-1000ml for small size cars; 1000ml-2000ml for big cars.
5. When driving, if find insufficient air in tyre, re-pump the tyre.


Precautions:
1. Keep away from heat, flame, spark and other source of ignition.
2. Store in a cool, dry place (45°C); Avoid direct sunlight.
3. Keep out of reach of children;

Liquid Transparent Marble Glue

Liquid marble glue:
1.Fast hardening.
2.Can be treated in cold weather.
3.Non hand sticky after cured.
4.Good adhesion.


1.Liquid transparent marble glue characteristics:
Fast hardening, gel time 3~6 minutes at room femperature, after 120minutes the treated parts can be further proceeded;Can be treated in cold weather;Non hand sticky after cured;Good adhesion, working properties (grinding, milling, drilling), easilypolishable.
2.Application:
Filling, patching, bonding and restoration of nature and cast stones,ceramics and porcelain tile.

3.Technical data:
Serialnumber
Item
Technical indexes
1
Pressing shear Stone
Standard
≥9Mpa
Water immersion
≥6Mpa
Heating
≥9Mpa
Freeze-thaw
≥5Mpa
2
Dangerous substance Content
voc content
≤250g/L
benzene
Not available
Toluene & xylene
Not available
formaldehyde
Not available

4.Direction:
Add 1 to 3g of hardener to 100g of filler for filling, bonding andlaminating after mixing both components thoroughly.

5.Attention:
Clean tools immediately after application, Clean with acetone ifnecessary;Safety rules of person protecion, wearing suitable gloves, glasses orscreen for face.and asure suitable local ventilation of work places;Rinse with water immeditaly in case of contact with eyes and skinsand appeal to doctor in serious case.
6.Storage and transportation:
Shelf life is approximately one year if stored in a dry and cool placeits tightly closed original container;Non-dangerous goods, avaible fo various transporation.
7.Production standard:
JC/T 989-2006
8.Management System:
The products have passed the International authentication of theISO9001: 2000 "quality management system" and ISO14001: 2004"Environmental Management System".
9.Announcement:
The above information is based on the latest stage of technical progressand merely take responsibility for this product . .It is to be considered asa non-binding hint and dose not release the user from a performance test,since application ,processing and environment influences are beyond our realm of control.

Liquid embedding material of double components Ruichem CX-513

This product is a liquid embedding material of double components, and is widely used in capacitor, tiny parts of transformer,etc

TECHNICAL DATA SHEET

INTRODUCTION
This product is a liquid embedding material of double components. It solidifies under normal temperature, and is widely used in capacitor, tiny parts of transformer, and ignition coil for their insulating pouring. When temperature raises, it will solidify more quickly. The hardened substance has good gloss and at the mean time, it has good insulativity.

FEATURES
1. Suitable for automatic assembly line work on a large scale
2. Low viscosity and strong penetrability, and hence can fill cells and wires
3. Little subsiding of other contents, no layers, no wasting, and well-distributed
4. Low exothermic peak and small convergent force when solidifying
5. Good electric property and michanical property of the hardened substance
6. Good heat resistance
7. Good sticking ability to various materials
8. Low water absorbing and coefficient linear expansion
9. Hardly flammable, weather resistant, heat conducting, and temperature-changing resistant

Characteristics before solidifying
ITEMS
A component
B component (curing agent)
Colour
Black liquid
Brown liquid
Viscosity (25°C)
1.4×103 pcs
30 pcs
Density
1.7~1.8
1.1~1.15
Proportion
4
1
Viscosity of the mixture (40°C)
400 pcs

Operating time: 50 minutes (25°C)
Solidifying time: 4 hours (25°C)
Hardening time: 12 hours (25°C) or 2 hours (60°C)

Characteristics after solidifying
volume resistance (25°C)
1.2×1015 Ohm-cm
Surface resistance (25°C)
1.3×104 Ohm
Voltage resistance (25°C)
16~19 KV/ mm2
Compression strength
20~23 kg/mm2
Bending strength
9~11 kg/mm2
Impact strength
6~9 kg/cm/ mm2
Inductivity
3.8 1Khz
Inductive loss
0.02 1Khz

GOOD CRAZING RESISTANCE
There're lots of causes for crazing, mainly by embedding and pouring. In order to improve the crazing resistance of hardened substance, Ruichem try best to prevent the crazing by padding, using resin, curing agent, and accelerating agent with high molecular weight. We also regularize manipulating during work to ensure the high quality of the product.

Table1: measures to prevent crazing
TTEMS
MEASURE
EFFECTS
Epoxy Resin
using pure epoxy resin for electrical industry with quite number of anhydride
lower the water absorbing, cut down resin modulus, and adjust curing time and the highest temperature when giving out heats
Curing agent
clean curing agent of low heat releasing and with low moisture
Lower the water content
Accelerating agent
adding pure accelerating agent
control the curing time and prevent crazing caused by sharp temperature changing

PACKAGE
A component: 20kg / barrel
B component: 5kg / barrel

SHELF LIFE AND STORAGE
Can be kept for 3 months when put in shade place of low temperature.

METHOD OF APPLICATION
Normal and vacuum are two crafts to pot, the previous one is mainly for potting adhesive curing at normal temperature that is used in low-voltage apparatus. While vacuum craft is usually applied in potting adhesives which is cured above normal temperature for high-voltage electrical apparatus' potting.

THE BASIC PROCESS TO EMBED

1. Preheat
2. Mix the two components
3. Deaerate
4. Embed
5. Demould

Liquid silicone glue

Liquid silicone glue, also called cold glue.
Liquid silicone glue packed in plastic bottles, 30 ml, 60ml, 100 gram, and 250 grams. Convenient and safe to use. It is ideal for handicraft, habby, and DIY.
Solid contents: 50%
Viscosity: 12000CPS
Density: 0.994
Usage: For adhesion on multi-pored, flat surfaces, polu-styrene, EVA foam, plastic, wood, cardboard, handicraft yarns, threads, Chinese braids and fabrics.
Capacity: 30ml, 60ml, 100ml, 250ml (Other capacity can be produced according customers requirement).
Application: Remove all grease, moisture and particles from the surfaces to be glued and apply this adhesive to the surfaces to be adhered, wait for 3-10 minutes before exerting force to stabilize the adhesive grip.

Lables on the bottles can be printed according to your design or requirements.

Lithopone B301

Lithopone B301/B302/B311/B312
25kg in net PP bag
Lithopone
Item
Standard
B301
B311
Ba+SO4 (as ZnS)%(m/m) ≥
99
99
Zinc (as ZnS) (m/m)%≥
28
30
Zinc Oxide %(m/m) ≤
0.6
0.3
105°C Volatile%(m/m)≤
0.3
0.3
Water Soluble%(m/m) ≤
0.4
0.3
Screen residues (63um mesh) %(m/m) ≤
0.1
0.1
Oil absorption g/100g ≤
14
10
Color Killing (Compare with standard specimen) %≥
105
105

Loctite 406 super glue

Loctite 406 Instant Adhesive - Low viscosity, Rapid bonding of plastics, rubbers, including EPDM, and elastomers
Loctite ® 406™ Prism ® Wicking grade, surface insensitive, one part, room temperature cure, instant adhesive designed for bonding plasics and elastomeric materials where very fast fixturing is required.

Rapid bonding of plastics, rubbers, including EPDM, and elastomers
Loctite 770 or Loctite 7239 Polyolefin Primer improves bonding on difficult to bond substrates.
Applications:Adhesives > Industrial Bonding > Instant - General Purpose
Adhesives > Substrate Type > Rubber to Metal
Chemistry:Cyanoacrylate
Media Carrier:100 % liquid & paste

Loctite 406

Loctite 406 Instant Adhesive - Low viscosity, plastics and rubber
Loctite ® 406™ Prism ® Wicking grade, surface insensitive, one part, room temperature cure, instant adhesive designed for bonding plasics and elastomeric materials where very fast fixturing is required.

Rapid bonding of plastics, rubbers, including EPDM, and elastomers
Loctite 770 or Loctite 7239 Polyolefin Primer improves bonding on difficult to bond substrates.
Applications:Adhesives > Industrial Bonding > Instant - General Purpose
Adhesives > Substrate Type > Rubber to Metal
Chemistry:Cyanoacrylate
Media Carrier:100 % liquid & paste

Loctite 495

Cure :Humidity
Viscosity:low
Key Substrates:Wood, Paper, Leather and Fabric
®
LOCTITE
495 is a general purpose cyanoacrylate instant
adhesive.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C
1.05
Viscosity, Cone & Plate, mPa·s (cP):
Temperature: 25 °C, Shear Rate: 3,000 s-1
20 to 45LMS
Viscosity, Brookfield - LVF, 25 °C, mPa·s (cP):
Spindle 1, speed 30 rpm
20 to 60
Vapour Pressure, hPa
<1
Flash Point - See MSDS

277 Threadlocking adhesive

Withstands temperatures up to 230*C
packing: Container: 10ml/50ml/250ml
10ml: 10ml/Spec, 10PCS/box, 400PCS/*CTN
277 Threadlocking adhesive:
high strength,high viscosity.excellent chemicals resistance.
for permanent locking and sealing bolts up to M36
prevent rust and corrosion of threaded fasteners.
heating and hand tools required for disassemble.

Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Prevail torque(N.m)
Break Torque(N.m)
Gap fill(mm)
Temperature range(°c)
Fixture time/Full cure time
222
10ml/50ml/250ml
Purole
1200/5000Thixotropic
4.0
6
0.13
-50~150
20min/24hrs
242
10ml/50ml/250ml
Blue
1200/6000Thixotropic
4.8
12
0.13
-50~150
20min/24hrs
243
10ml/50ml/250ml
Blue
2250/8000Thixotropic
7.0
20
0.13
-50~150
20min/24hrs
262
10ml/50ml/250ml
Red
1800/5000Thixotropic
22
22
0.13
-50~150
20min/24hrs
271
10ml/50ml/250ml
Red
500
31
25
0.13
-50~150
20min/24hrs
272
10ml/50ml/250ml
Red
6000
25
23
0.25
-50~230
30min/24hrs
277
10ml/50ml/250ml
Red
7000
32
32
0.25
-50~150
30min/24hrs
290
10ml/50ml/250ml
Green
12
29
10
0.10
-50~150
20min/24hrs

Loctite 5699 grade silicone sealant

OPT5599BT is a kind of semi-transparent paste, one-component silicone sealant,thermal cycle resistance,aging resistance
OPT5599BT One-Component
Silicone Sealant
Product information
OPT5599BT is a kind of semi-transparent paste, one-component silicone sealant which can be cured in room temperature. Adhesive to different material without bottom coating, it mixes with Moisture and becomes a kind of elastic silicone rubber. It has good features of non-corrosion to most metal, thermal cycle resistance, aging resistance, electrical insulation, anti-seismic, corona-resistance, leakage-resistance and chemical resistance.
This product is especially applicable in improving Adhesive between plastic products and metal, glass, plastic, wood board, aluminum panel, circuit board and cardboard without any handling for the cured silicone rubber. It is capable of operating in -50~250°C condition for 1h and can be cured within 24h mixed with moisture, which totally abbeys the ROHS order of European Union.
Typical use
1. Moisture-proof and water proof package for electronic equipments and fittings
2. Sealing for adhesive parts
3. Electrical insulation and fixation of electronic fittings
4. Sealing for washers of car headlamp
5. Adhesive and sealing of some other metal and plastic
6. Adhesion and sealing of fridge, microwave oven, breadboard electronic element, solar energy equipment and machines
Using method
1. Clean surface: clean and dry and degrease the surface before coating.
2. Coating: open the cover then press the adhesive to the clean surface.
3. Curing: put the equipment in the open air until it is cured form outside to inside. The adhesive will cure for 2~4mm within 24h in room temperature. It is suggested that it should be spontaneous curing in outdoor for enough long time to ensure the effect. Low temperature requires more time. Sealing adhesive with thickness of 6mm needs more than 7 day to be completely cured.
Note
Cover the bottle after operation as soon as possible. Clean the bottle mouth if there is some coating. It will do no harm to the product.
Technical parameter before and after curing
performance index
OPT5599BT
Before curing
appearance
semi-transparent past
relativity density(g/cm
3
)
1.05~1.15
dry time(min)
≤20
curing time (d)
3~7
curing type
one-component deketoxime
After curing

hardness (Shore A)
45±5
shear strength(MPA)
≥1.5
shear strength(MPA)
≥1.5
breaking elongation(%)
≥250
peeling intensity(N/mm)
›6
applicable temperature (°C)
-60~250
volume resistivity (Ω·CM)
≥2.0×10
16
dielectric strength (kV/·mm)
≥15
dielectric constant (1.2MHz)
2.4
The statistics above are tested in 25°C, relative humidity 55% condition, 7 days after curing. Our company is not responsible for the difference which caused by different condition or modified products.

Loctite Quality Thread Locker For Industy Use-222/242/262/271/277/515/510/565/680/609

Flange Sealant
Thread Locker / Anaerobic Adhesive
Thread Locking Sealant
Nut Locker
Steel Locker



PRODUCT DESCRIPTION:
JIAYUAN Flange Sealant: cures when confined in the absence of air
between close fitting metal surfaces. It seals close fitting joints
between rigid metal faces and flanges and will flex with minor
flange movements. Provides resistance to low pressures
immediately after assembly of flanges. Typically used as a
form-in-place gasket for pumps, thermostats, compressors,
transmission housings and axle covers.
Directions for use
1. For best performance bond surfaces should be clean and
free from grease
2. The product is designed for close fitting flanged parts with
gaps up to 0.25 mm
3. Apply manually as a continuous bead or by screen
printing to one surface of the flanges
4. Low pressures (<0.05 MPa) may be used when testing to
confirm a complete seal immediately after assembly and
before curing
5. Flanges should be tightened as soon as possible after
assembly to avoid shimming

Low Melting Point Thermal Adhesives

No heat sink preheating required
Low thermal resistance
The Low Melting Point Thermal of TIC™800P Series
is low melting point thermal interface material. At 50°C, The TIC™800P Series begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the integrated circuit package surface, thereby reducing thermal resistance.The TIC™800P Series is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance.
The TIC™800P Series
shows no thermal performance degradation after 1,000
hours@130°C,or
after 500 cycles, from -25°C to 125°C.The material softens and does not fully change state resulting in minimal migration (pump out)at operating temperatures.
Features
1.0.024°C-in² /W thermal resistance
2.Naturally tacky at room temperature, no adhesive required
3.No heat sink preheating required

Applications
1.High Frequency Microprocessors
2.Notebook and Desktop PCs
3.Computer Serves
4.Memory Modules
5.Cache Chips
6.IGBT

Low Modulus Acetoxy Silicone Sealant

A low modulus acetoxy curing silicone sealant which provides a permanently water tight and weatherproof flexible rubber seal.

A low modulus acetoxy curing silicone sealant which provides a permanently water tight and weatherproof flexible rubber seal. Low Modulus Acetoxy curing Silicone Sealant offers excellent adhesive properties on many building substrates, making it suitable for use externally and internally on glass, aluminium, painted surfaces, plastics, composite boards and non-porous surfaces. The low modulus formulation can cope with greater movement for sealing gaps and weatherproofing. Ideal for PVCu windows and doors.
Use Low Modulus Acetoxy curing Silicone Sealant for general exterior sealing and weatherproofing around door and window frames, especially wood, metal and PVCu. Sealing glass to glass and glass to aluminium. Draught proofing casement windows and doors. Top sealing in glazing systems and sealing cladding.
Do not use; on concrete, marble, galvanised steel, copper, brass, lead, for fixing mirrors, aquarium assembly, bitumen, oily surfaces or submerged areas of permanently standing water. Over painting is not recommended. On porous or unsound surfaces priming is advised. Use of a fungal resistant silicone is preferred for wet and humid areas such as kitchens and bathrooms.
Low Modulus Acetoxy curing Silicone Sealant is available in white, translucent and brown in 310ml cartridges.

Low viscosity easy flow epoxy resin for LED signs EP-705

1.Low viscosity, easy flow
2.Good adhesion
3.No color
4.No poison
5.No solvent
Introduction of epoxy resin for LED signs EP-705
EP-705 epoxy resin is using LED signs, cured epoxy is very transparent, it can be added any color. This epoxy is heat-resistant and weather-resistant. It has excellent strength and tenacity performance. EP-705 epoxy resin is popular in sealing and pouring for all kinds of LED signs.
Technology
(1) A Part weight: B part weight = 100: 40 (This scale can be changed for satisfaction)
(2) Technological operation:
----Weight out A and B parts exactly according to the proportion (weight), mix A and B fully, and rest 5-10 min after mixed, then encapsulation.
(3) Cured condition: 12-24hr at room temperature.
Usage
Usage of epoxy resin for LED signs (Operational approach for pouring type LED shine letters)
(1) Put LED models in right way, the connector between line and mould should be sealing by silicone sealant to avoid epoxy leak out.
(2) Pouring the first layer by the mixed epoxy resin ( just 5A and 2B).Stop until 5mm to full for next step.
This layer thickness is about 2cm.
(3) Pouring the second layer by A + B + Dodging agent + Color paste ( 5A + 2B + (2-3)% Dodging agent +(0.5-1)% Color paste). The ratios of Dodging agent and Color paste are according to the weight of A component. This layer should be full in LED models.
(4) Cured in room temperature, or cured by heating.
(5) Repair to perfect
(6) Suggestion: a) Reflectorized paint can be coated in inside of LED model for saving lights.
b) Control the lays thickness, above first and second layers for 2.5-3cm LED signs.
Note
(1) A component should be preheat to 50-60°C for easy operation and the best effecting.
(2) Implements of stirring, mixing and measuring should be clean.
(3) When stirring, need toward one direction and slowly to avoid bubbles.
(4) Rest 5-10min after mixed before pouring.
(5) Pouring by one side to avoid bubbles too.

Low volatility low odor cure room temperature vulcanizing silicone sealant SC-1103

Low volatility low odor cure silicone sealant
1.low odor cure
2.room temperature vulcanizing
3.low volatility
Low volatility low odor cure room temperature vulcanizing silicone sealant SC-1103

PRODUCT DESCRIRTION
SC-1103 provides the following product characteristics:
Technology
Silicone
Chemical type
White viscous paste
Appearance (uncured)
Translucent liquid
Components
One component - requires no mixing
Cure
Room temperature vulcanizing (RTV)
Specific benefit
Flame retardant
Applications
Sealing and gluing

KEY FEATURES
Flame retardant
Low volatility
Non-corrosion to metals; meets MIL-A-46146B corrosion test
Fast cure
Low odor cure; releases an alcohol vapor during cure
Primerless adhesion to many substrates

TIPICAL PRODUCT DATA
TYPICA
L UNCURES PROPERTIES
Appearance

White viscous paste
PH

7.2
Tack-free time(23°C)
min
3
TYPICA
L CURED PROPERTIES
(7DAY
S @ 23
°C
/50% RH)
Appearance

Elastic rubber
Specific gravity

1.45
Hardness
Type A
70
Tensile strength
MPa
2.58
Breaking elongation
%
88
Shear bond strength
MPa
2.5
Volatile siloxane
Wt %
0.028
Dielectric strength
KV/mm
20
Volume resistivity
M •m
2*10
7
Dielectric constant(50Hz)

3.8
Dielectric loss(50Hz)

0.005

GENERAL INSTRUCTIONS AND PRECAUTIONS
Avoid getting uncured material in the eyes, take eye protection at all times when working with this product.
Extended contact with the skin can cause irritation and should be avoided.
Wear protective gloves when working with this product.
Maintain good ventilation in the workplace at all times


DIRECTIONS FOR USE
For best performance bond surfaces should be clean and free from grease.
Full performance properties will develop over 72 hours.
Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
Excess material can be easily wiped away with non-polar solvents

STORAGE
Store in a dry, cool place away from direct sunlight Optimal Storage: 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Note
The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.

Low-Na stabilizer colloidal silica

Low-Na stabilizer colloidal silica (silicon dioxide,silica sol)Particle size 8-20(nm),low impurity, high diaphaneity, etc.

Low-Na stabilizer colloidal silica can be divided into LS-10LS-15LS-20LS-25LS-30 based on its different SiO
2
content.
Designation
Model and Standard
LS-10
LS-15
LS-20
LS-25
LS-30
Appearance
Slight milky transparent to translucent liquid
SiO
2
(wt%)
10±1%
15±1%
20±1%
25±1%
30±1%
Na
2
O (wt%)
≤0.20%
PH (20°C)
8.5-10.0
Density (20°C,g/cm
3
)
1.06-1.08
1.08-1.10
1.12-1.14
1.15-1.17
1.19-1.21
Viscosity (20°C,mPaS)
≤10
Particle size (nm)
8-20
Stability
Two years

Packing & Storage
Colloidal silica is packed in 25kg,250kg or 1000kg plastic drums.
Store the colloidal silica at a temperature between 0 and 50, avoid exposure to the air, and insulate it from the sun.
Wash the empty drums as quickly as possible to avoid SiO
2
crystalline deposits.
If you want to remove the deposition from empty drums, use a 10-percent NaOH solution at 50~60.

Low-temperature hot melt adhesive

Advantage
Green and environmental protection product
Excellent clastic-recovery,not easy to be deformed by an external force

Lowest Price Aqueous Pressure Sensitive Adhesive (Glue water) for The Adhesive Tapes

Adhesive
1.We can produce ur Pressure Sensitive Glue
2.ISO Certificate
3.Acrylic,purified water,butylacrylate,etc
Pressure Sensitive Adhesive(Glue water)Adhesive:

(1) Outlook: Ivory Liquid
(2) Viscosity: 100—180 mPa.S
(3) Solid content: 54%---56%
(4) Residual Unit Volume: not have or few
(5) PH: 7.0---8.0
(6) 180 degree peel force: >=5.5N, 2.5n
(7) Initial adhesion: Steel ball size ≥ #14
or Initial viscosity: 13 balls; <=5.0
(8) 0 degree permanent adhesion: >=24 n/25mm kg
(9)Contents: Acrylic pressure sensitive adhesive, purified water,etc about 10 chemical materials

Loxeal UV glue

Loxeal UV glue
Loxeal UV glue,
used for adhere the glass, high transparency, no scars left.

0588 PVA chemical adhesive Polyvinyl Alcohol

1.PVA Polyvinyl Alcohol
2. Solid powder and flakiness
3. Odorless and nontoxic
4. Excellent film forming
5. Direct Manufactu
PVA
PROPERTIES:
Polyvinyl Alcohol is high polymer with excellent characters to dissolve easily in water but not to dissolve in common organic solvent and organic acids, and with excellent film-forming property, oilresistant, chemical-resistant. It can react with formaldehydes to form polyvinyl acetal.

Specification:
Type\Descripion
Alcoholysis
(mol%)
Viscosity
(mpa.s)
Sodium acetate (NaAC%)
Volatiles(%)
Ash(%)
PH Value
17-99(H)
≥99.8
20.0-28.0
≤6.8
≤7.0
≤2.8
7-10
17-99(L)
≥99.0
22.0-28.0
≤2.1
≤7.0
≤0.7
5-7
19-99(H)
≥99.8
28.0-31.0
≤6.8
≤7.0
≤2.8
7-10
19-99(L)
≥99.0
28.0-31.0
≤2.1
≤7.0
≤0.7
5-7
20-99(H)
≥99.8
31.0-38.0
≤6.8
≤7.0
≤2.8
7-10
21-99(L)
≥99.0
32.0-37.0
≤2.1
≤7.0
≤0.7
5-7
22-99(H)
≥99.8
42.0-50.0
≤6.8
≤7.0
≤2.8
7-10
24-99(L)
≥99.0
50.0-56.0
≤2.1
≤7.0
≤0.7
5-7
25-99(L)
≥99.0
56.0-69.0
≤2.1
≤7.0
≤0.7
5-7
26-99(L)
≥99.0
69.0-75.0
≤2.1
≤7.0
≤0.7
5-7
17-88(L)
≥87.0
20.0-35.0
≤2.1
≤7.0
≤0.7
5-7

Application area:
A. textile industry PVA is mainly used as a warp dressing agent; textile finishing agent and the raw material of vinylon.
B.construction upholstery industry 107/801 glue, it’s used as an additive of cement and mortar ,inner and outer wall paints, and mounding board binder.
C. chemical industry
D.paper industry
E.agriculture
F.used as a well-fixing agent in petroleum exploitation
G.cosmetic, printing, medicine and electronic

Package:
packed in plastic bag lined with polywoven bag. Net weight 12.5kgs or 20kgs if Floccule, Net weight 25kgs if Powder,Net weight 20kgs if Flake.
Quality Targets: (Standard Number:China GB120101.1~12-89)

277pu Threadlocker adhesive

Withstands temperatures up to 230*C
Container: 10ml/50ml/250ml
high strength,high viscosity.excellent chemicals resistance
277 Threadlocking adhesive:
high strength,high viscosity.excellent chemicals resistance.
for permanent locking and sealing bolts up to M36
prevent rust and corrosion of threaded fasteners.
heating and hand tools required for disassemble.

Technical Date Sheet
Product Number
Container
Color
Viscosity(mPa.s)
Prevail torque(N.m)
Break Torque(N.m)
Gap fill(mm)
Temperature range(°c)
Fixture time/Full cure time
222
10ml/50ml/250ml
Purole
1200/5000Thixotropic
4.0
6
0.13
-50~150
20min/24hrs
242
10ml/50ml/250ml
Blue
1200/6000Thixotropic
4.8
12
0.13
-50~150
20min/24hrs
243
10ml/50ml/250ml
Blue
2250/8000Thixotropic
7.0
20
0.13
-50~150
20min/24hrs
262
10ml/50ml/250ml
Red
1800/5000Thixotropic
22
22
0.13
-50~150
20min/24hrs
271
10ml/50ml/250ml
Red
500
31
25
0.13
-50~150
20min/24hrs
272
10ml/50ml/250ml
Red
6000
25
23
0.25
-50~230
30min/24hrs
277
10ml/50ml/250ml
Red
7000
32
32
0.25
-50~150
30min/24hrs
290
10ml/50ml/250ml
Green
12
29
10
0.10
-50~150
20min/24hrs

LuShi Case- Making Glue

Future:
1.has advantages of spray even.
2.longer opening time
3.longer adhesive period
4.no smell
Performance and Future:
1.The product is used of the newest polymer material and adopted the advanced environmental blend and technology, has the advantages of spray even, good initial viscosity, good adhesive force, has no smell etc. Does not add heavy metal, formaldehyde, 1,2-dichloroethane, benzene and homologues, has passed national standard GB18583—2008 and it is environmental and has no harm to human.
2.Application
Range
:
Widely applies to the manufacture of sofa, screen, leather, toy, case and shoes etc. And also applies to large area conglutination of sponge, boards, paper, clothes and thin metals etc.
3.Adhesive Bonding Technology:
Check the lance before construction and run the ventilation system in the construction location, open doors and windows to ventilate the place. Keep away from fire and make the surface of the material clean and dry, spray averagely, lay it 1-5min to bond it (Or the coating is not sticky), depress properly while conglutinating. Clean out the lance when not in use to avoid lance jammed.

4.Technical Index
Type
Main ingredients
Viscosity
Heat&Aging Resistance
Colatilization time
opening time
Best time forConglutination
Executive Standard
LS9193
Synthetic Rubber,Savage Resin
70
+
10
Good
30-60s
8min
1-3min
GB19340-2003
Q/LS10-2008
LS9193A
Synthetic Rubber,Savage Resin
80
+
10
Good
30-60s
6min
1-3min

GB19340-2003
Q/LS10-2008
LS9193B
Synthetic Rubber,Savage Resin
80
+
10
Excellent
60-90s
30min
5-10min
GB19340-2003
Q/LS10-2008

LuShi Spray Glue

1.saving glue
2. good initial viscosity
3.longer adhesive period
4.no smell
Performance and Future:
The product is used of the newest polymer material and the advanced environmental blend and technology, adopted soybean oil solvent , containing no harmful substance and smell, has the advantages of spray even, saving glue, good initial viscosity, flexible film. It is the upgrading of Lushi spray glue and has passed national standard GB18583—2008.

Application
Range
:
Widely applies to the manufacture of sofa, screen, leather, toy, case and shoes etc. And also applies to large area conglutination of sponge, boards, paper, clothes and thin metals etc.

Adhesive Bonding Technology:
Check the lance before construction and run the ventilation system in the construction location, open doors and windows to ventilate the place. Keep away from fire and make the surface of the material clean and dry, spray averagely, lay it 1-5min to bond it (Or the coating is not sticky), depress properly while conglutinating. Clean out the lance when not in use to avoid lance jammed.

Lubricator

Lubricator
Conductive Lubricating Grease with Heat Dispersa
Lubricator (Electroplating equipment)

Feature:
1. This product is able to avoid oxidized and electrochemical on contact surface, as consists of water resistance
2. Capable of protecting steel, copper, aluminum, and more metal surface
3. With heat dispersal function, it is able to reduce temperature on contact surface, to avoid heating on contact surface
4. With good lubricating performance, it is able to reduce friction coefficient to avoid friction and wearing on contact surface
5. With strong adhesion, with less consumption, for applying in a small automatic electroplating line, averagely it will
be consumed one kilogram only for one year
6. Product number 385 is able to reduce resistance for less than 2 milli-ohms and keeps resistance stably on low level,
makes temperature not raise on contact surface, to avoid damage on components
Application
1. For all of connecting section, rotating section, contact section and contact point on electroplating equipment which
ampere always pass through
2. Suitable for reducing resistance, keeping resistance stably on low level and to avoid oxidization, in order to improve
conductiv efficiency and to extend life of copper plate and reduces percentage of bad electroplated components
Application Scope:
1. Barrel/barrel rack on barrel plating equipment
2. Connector, conductive rail, plate, wire, and more; static or dynamic section on rectifier is applicable
3. Copper plate and rail on plating trough

Specification:
Type
G-CP385-S (#385 in silver and made in Germany)
G-CP310-G (#310 in gold/copper color and made in Germany)
T-CP300-W (#300 in white color and made in Taiwan)
Suitable temperature
from –40
o
C to + 140
o
C (#385&#310)
from 5
o
C to + 80
o
C (#300)
Chemical character
Characterized by effective resistance to acids/alkali, the product is waterproof, and does not corrode PVC or other bonding materials.
Packing
1Kg
in a white-color PVC can.

M-200 High Performance Neutral Anti-Mildew Silicone Sealant(adhesive)

1.manufacture
2.excellent adhesive ability
3 good weatherproof
4.fast curing speed
5 rtv silicone
Neutral cure
Fast dry
Water proof
Weather proof
200ml/280ml/300ml/592ml

ISO 9002 International Quality & RoHS Certificated

Application:
Apply to ceramic tile, ceramic, aluminum, stainless steel, non-oiled timber, brick , stone, concrete, coating glass, glass, skylight, bathtub, wash basin, water tap, pipe, enamel, paint surface, bathroom, kitchen, water tube, storeroom, cold cellar, moist area, indoor fixing, shipbuilding, car, packing, advertising, family decoration, etc.
Performance:
Neutral solidified, middle modulus; good weatherproof, like heatproof, ice and snow resistance, UV rays resistance, ozone resistant and extreme condition resistance; distinctive elasticity and restoring force; outstanding anti mildew ability; no corrosion to stone, cement, metal and glass surface; no stimulus released; good bond strength and durable.
Usage:
Remove the impurities, clean and dry the surface, then cut the nozzle to a desired opening angle and apply the sealant with glue gun, press at 45 degrees. Normally cure on surface in 30 minutes and solidify in 24 to 48 hours.
Storage:
Store in the original airtight container and keep at cool, dry and well ventilated place with temperature at 20°C to 30°C, use within 12 months from the date of produce.
Limitation:
Should not use as structural sealant; not apply to any cache or soaked underground joint; not for permanent or continuous water immersion; not apply to alkaline material, like concrete or cement; or not use on the oiled penetrating surface, like coating glass or mirror, coating metal or plastic.
Caution:
If eye contacts to the uncured sealant, immediately flush with water for 15 minutes and consult doctor. Keep the job location ventilated. Keep out of reach of children.

M-8100 Neutral weather-resistance silicone sealant

1)Neutral curing, no corrosion to building materials except copper
2)easy application
3)fast speed of curing
4)high adhesion
A . FEATURES
Monocomponent, convenient to apply within the temperature 5°C~40°C;
Neutral curing, high modulus, no corrosion to building materials such as glass, coated glass, concrete, marble, metal, etc.;
Excellent aging resistant performance and excellent high and low temperature resistant performance, its function is hardly changed within the temperature scope -40°C~150°C;
Excellent adhesion to most of building materials, no need prime. Excellent compatibility with other neutral silicone sealants.
B. USES
Weather resistant sealing for various curtain wall such as glass, aluminum plate etc.;
Sealing for marble, granite, bricks and metal panel, etc.;
Other uses.
C.COLOR AND PACKING
Color : black, grey, white and any other color as request;
Packing : M-810 packed in 310ml cartridge and M-8100 packed in 590ml soft packing.
D .STANDARD
China JC-T 882-2001 Curtain Wall Silicone Sealant

E .TECH INDEX
Performance
National standard
GB/T 14683-2003
Company standard
Q/JH13-2005
Measured Value
Testing method
Slumpability mm
≤3
≤2
0
GB/T 13477
Extrusion mL/min
≥80
≥300
300
Tack free time min
≤180
≤120
40
Hardness HsA
/
/
52
GB/T 531
Loss of heating %
≤10
≤8
5.0
GB/T 13477
Tensile strength in adhesion MPa
≥0.4(high modulus)
≥0.4(high modulus)
0.542
Destroying area of adhesive %
≤5
≤5
0
Permanent set adhesion
Non destroy
Non destroy
Non destroy
Adhesion after radiation of
Non destroy
Non destroy
Non destroy
Adhesion of hot stress and cold pull
Non destroy
Non destroy
Non destroy
Adhesion of immersion in water
Non destroy
Non destroy
Non destroy
Shelf life
Store for 12 months at 20~30°C in cool, dry place after date of manufacture.

F.CAUTIONS
Dont use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G.APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

M-8100 Neutral weather-resistance silicone sealant

1)Neutral curing, no corrosion to building materials;
2)Easy handling;
3)Fast curing speed;
4)High adhesion
A . FEATURES
Monocomponent, convenient to apply within the temperature 5°C~40°C;
Neutral curing, high modulus, no corrosion to building materials such as glass, coated glass, concrete, marble, metal, etc.;
Excellent aging resistant performance and excellent high and low temperature resistant performance, its function is hardly changed within the temperature scope -40°C~150°C;
Excellent adhesion to most of building materials, no need prime. Excellent compatibility with other neutral silicone sealants.
B. USES
Weather resistant sealing for various curtain wall such as glass, aluminum plate etc.;
Sealing for marble, granite, bricks and metal panel, etc.;
Other uses.
C.COLOR AND PACKING
Color : black, grey, white and any other color as request;
Packing : M-810 packed in 310ml cartridge and M-8100 packed in 590ml soft packing.
D .STANDARD
China JC-T 882-2001 Curtain Wall Silicone Sealant

E .TECH INDEX
Performance
National standard
GB/T 14683-2003
Company standard
Q/JH13-2005
Measured Value
Testing method
Slumpability mm
≤3
≤2
0
GB/T 13477
Extrusion mL/min
≥80
≥300
300
Tack free time min
≤180
≤120
40
Hardness HsA
/
/
52
GB/T 531
Loss of heating %
≤10
≤8
5.0
GB/T 13477
Tensile strength in adhesion MPa
≥0.4(high modulus)
≥0.4(high modulus)
0.542
Destroying area of adhesive %
≤5
≤5
0
Permanent set adhesion
Non destroy
Non destroy
Non destroy
Adhesion after radiation of
Non destroy
Non destroy
Non destroy
Adhesion of hot stress and cold pull
Non destroy
Non destroy
Non destroy
Adhesion of immersion in water
Non destroy
Non destroy
Non destroy
Shelf life
Store for 12 months at 20~30°C in cool, dry place after date of manufacture.

F.CAUTIONS
Dont use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G.APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

Project photos

M-820 neutral weather resistant silicone sealant

Mono-component, convenient to use at the temperature 5-40 degree centigrade
A . FEATURES
Mono-component, convenient to use at the temperature 5-40°C
Neutral curing, high modulus, no corrosion to the materials such as glass, coated glass, concrete, marble, metal, etc.
Excellent adhesion to most building materials, no need to use prime.
Excellent compatibility to other neutral silicone sealant.
B . USES
Sealing for various curtain wall such as glass, aluminum and ceramics;
Sealing for marble, granite , concrete, brick and tile, metal panel;
Other uses.
C .COLOR AND PACKING
Color: black, grey, white and other colors as customers request;
Packing : M-820 packed in 310ml cartridge ( net weight: 300ml ).
D .STANDARD
GB/T 14683-2003.
E .TECH INDEX

F .CAUTIONS
Dont use for the alkaline materials such as marble, granite etc;
Dont use for the hide and semi-hide curtain wall and installation of coated glass by metal;
Unsuitable for the grease, plasticizer or solvent surfaces
Unsuitable for the bad-ventilated places because silicone sealant is easily cured after absorbing the moisture in the air;
Unsuitable for frost or humid places
Dont use it if the temperature of the surface is below 4°C or above 50°C.
G .APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

M-830 Multi-functional silicone sealant for dustproof sealing

1)Excellent weather resistance
2)Fast curing speed;
3)Neutral curing;
4)Durability
A

.

FEATURES
Monocomponent, neutral curing, non-corrosive to marble, coated glass, concrete and metal ( except copper );
Fast curing speed, high adhesion, low modulus, high displacement performance;
Excellent weather resistant performance and excellent ageing resistant performance;
Excellent adhesion to most of building materials and excellent compatibility with other neutral silicone sealants

B . USES
Excellent waterproof and dustproof performance;
Sealing for various installation of aluminum alloy glass doors and windows;
Sealing for organic glass, polycarbonate;
Electrophoresis plate, electronic appliance, mechanical and medicine equipment ect.
C .COLOR AND PACKING
Color: translucent or the color as customers request;
Packing: M-830 packed in 310 cartridge ( Net weight: 300ml ).
D .STANDARD
GB/T 14683-2003 SILICONE BUILDING SEALANT
E .TECH INDEX

Performance
National Standard
GB/T 14683-2003
Measured Value

Testing method
JH-378
Slumpability (mm)
≤3
0

GB/T 13477
Extrusion (ml/Min)
≥80
210
Tack-Free Time (min)
≤180
40
Hardness (HsA)
/
27
GB/T 531
Loss of Heating %
≤10
5.0
ASTMC 792
Tensile strength in adhesion (Mpa)
<0.40
0.353
GB/T 13477
Stability
Store for 12 months at 20~30°C in cool, dry place after date of producing.

F .CAUTIONS
Dont use it as silicone structural sealant.
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G .APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

Project photos

M-830 Non-corrosion waterproof clear silicone sealant

1)Monocomponent,
2)Neutral curing, non-corrosive (except copper)
3)weather-resistance
4) Good compatiblity with other neutral
A . FEATURES
Monocomponent, neutral curing, non-corrosive to marble, coated glass, concrete and metal ( except copper );
Fast curing speed, high adhesion, low modulus, high displacement performance;
Excellent weather resistant performance and excellent ageing resistant performance;
Excellent adhesion to most of building materials and excellent compatibility with other neutral silicone sealants

B . USES
Excellent waterproof and dustproof performance;
Sealing for various installation of aluminum alloy glass doors and windows;
Sealing for organic glass, polycarbonate;
Electrophoresis plate, electronic appliance, mechanical and medicine equipment ect.
C .COLOR AND PACKING
Color: translucent or the color as customers request;
Packing: M-830 packed in 310 cartridge ( Net weight: 300ml ).
D .STANDARD
GB/T 14683-2003 SILICONE BUILDING SEALANT
E .TECH INDEX


Performance
National Standard
GB/T 14683-2003
Measured Value

Testing method
M-830
Slumpability (mm)
≤3
0

GB/T 13477
Extrusion (ml/Min)
≥80
318.6
Tack-Free Time (min)
≤180
25
Hardness (HsA)
/
30
GB/T 531
Loss of Heating %
≤10
3.4
ASTMC 792
Tensile strength in adhesion (Mpa)
<0.40
0.34
GB/T 13477
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.

F .CAUTIONS
Dont use it as silicone structural sealant.
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G .APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

Project photos

M-840 Neutral anti-mildew silicone sealant

Monocomponent, neutral curing, no corrosion to constructon materials such as metal, coated glass, concrete, marble , granite.
A . FEATURES
Monocomponent, neutral curing, no corrosion to constructon materials such as metal, coated glass, concrete, marble , granite and most of t he plastic etc.;
Fast curing speed, middle modulus, excellent anti-mildew performance;
Excellent high and low temperature resistant performance, its function is hardly changed within the temperature scope -40°C~150°C;
Excellent adhesion with most building materials and no need to use prime;
Excellent compatibility with other neutral silicone sealants.
B . USES
Waterproofing and anti-mildew sealing for various kitchen utensils, sanitary ware;
Sealing for marble and aluminum panel, door and window glass assembly, curtain wall gap-filling, etc.;
Other uses.
C .COLOR AND PACKING
Color: white, translucent and other colors as customers request;
Packing : M-840 packed in 310ml cartridge ( net weight: 310ml )
D .STANDARD
China JC-T 885-2001 Anti-mildew silicone sealant
E .TECH INDEX

F .CAUTIONS
Dont use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C
G .APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

28 Modified Epoxy Resin concrete construction sealant glue for Planting Stud Bolt

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barrel)
30kg/group(A~20kg. B~10kg)

M-8500 Neutral stone silicone sealant

Monocomponent, neutral curing, no corrosion and no pollution to the building materials such as stone, concrete ec.;
A . FEATURES
Monocomponent, neutral curing, no corrosion and no pollution to the building materials such as stone, concrete ec.;
Excellent aging resistant performance and excellent adhesion to the building materials such as marble, granite, concrete, etc.;
Excellent high and low temperature resistant performance, its function is almost un-changed within the temperature scope -40°C~150°C;
Excellent compatibility with other neutral silicone sealants.
B. USES
Gap-filling sealing for marble, granite curtain wall construction;
Sealing for ceramic and tiles project and used in other areas.
C .COLOR AND PACKING
Color: black, grey, white and other colors as customers request;
Packing : M-850 packed in 310ml cartridge ( net weight : 300ml ) and
M-8500 packed in 590ml compound soft packing.
D .STANDARD
China JC/T 883-2001 Stone Building Silicone Sealant.
E .TECH INDEX


Performance
National Standard
GB/T 14683-2003
Measured Value

Testing method
M-8500
Slumpability (mm)
≤3
0

GB/T 13477
Extrusion (ml/Min)
≥80
225
Tack-Free Time (min)
≤180
35
Hardness (HsA)
/
27
GB/T 531
Loss of Heating %
≤10
4.1
ASTMC 792
Tensile strength in adhesion (Mpa)
<0.40
0.346
GB/T 13477
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.

F .CAUTIONS
Dont use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G.APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

M-8500 Non-corrosive silicone sealant for stone material

1)Manufacturer;
2)Monocomponent;
3)Neutral curing, no corrosion and no pollution ;
4)Superior quality
A . FEATURES
Monocomponent, neutral curing, no corrosion and no pollution to the building materials such as stone, concrete ec.;
Excellent aging resistant performance and excellent adhesion to the building materials such as marble, granite, concrete, etc.;
Excellent high and low temperature resistant performance, its function is almost un-changed within the temperature scope -40°C~150°C;
Excellent compatibility with other neutral silicone sealants.
B. USES
Gap-filling sealing for marble, granite curtain wall construction;
Sealing for ceramic and tiles project and used in other areas.
C .COLOR AND PACKING
Color: black, grey, white and other colors as customers request;
Packing : M-850 packed in 310ml cartridge ( net weight : 300ml ) and
M-8500 packed in 590ml compound soft packing.
D .STANDARD
China JC/T 883-2001 Stone Building Silicone Sealant.
E .TECH INDEX


Performance
National Standard
GB/T 14683-2003
Measured Value

Testing method
M-8500
Slumpability (mm)
≤3
0

GB/T 13477
Extrusion (ml/Min)
≥80
225
Tack-Free Time (min)
≤180
35
Hardness (HsA)
/
27
GB/T 531
Loss of Heating %
≤10
4.1
ASTMC 792
Tensile strength in adhesion (Mpa)
<0.40
0.346
GB/T 13477
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.

F .CAUTIONS
Dont use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Cant fill if the temperature of the surface is below 4°C or above 40°C.
G.APPLICATION
Detailed operation procedure please note The Technology Instruction of Jianhua Silicone sealant

Project photos

M-910 Acetoxy glass silicone sealant

M-910 Acetoxy glass silicone sealant monocomponent,acetoxy curing,fast curing speed, low modulus,displacement performance
A. FEATURES
Monocomponent, acetoxy curing, fast curing speed, low modulus, high displacement performance, excellent adhesion.
Excellent weather resistant performance and excellent ageing resistant performance..
Excellent compatibility with most of building materials.
B . USES
Used for various doors and windows installation, glass skylight, vitrine;
Sealing for Aluminum and Glass-curtain-wall;
Used for other industrial area..
C.COLOR AND PACKING
Color : transparent, aluminum, black, white , brown and other colors as customer’s request.
Packing: M-910 packed in 310ml cartridge ( net weight: 300ml )
D .STANDARD
GB/T 14683-2003
Silicone building sealant
.
E .TECH INDEX
Test item
GB/T14683-2003
Actural Test value
Test method
Sagging degree (mm)
≤3
0
GB/T13477
Extrusion performance (ml/min)
≥80
258
Tack-free time (min)
≤180
24
Hardness (HsA)
/
28
GB/T531
Loss of weight in heating
≤10
7.0
ASTMC792
Elasticity Restoring factor
≥80
915
GB/T13477
Stretching binding strength (Mpa)
<0.4
0.303
Fixed Adhesion
Non destroyed
Non destroyed
Maximum strength Elongation %
/
150
Store
Store in the cool and dry place at -20~30oC
F.CAUTIONS
Don’t use for the alkaline materials such as marble, granite etc;
Don’t use for the hide and semi-hide curtain wall and installation of coated glass by metal;
Unsuitable for the grease, plasticizer or solvent surfaces
Unsuitable for the bad-ventilated places because
silicone sealant
is easily cured after absorbing the moisture in the air;
Unsuitable for frost or humid places
Don’t use it if the temperature of the surface is below 4°C or above 50°C.
G .APPLICATION
Detailed operation procedure please note “The Technology Instruction of Jianhua
Silicone sealant
”


Project photos

M-920 Acetoxy glass silicone sealant

M-920 Acetoxy glass silicone sealant monocomponent,acetoxy curing,fast curing speed, low modulus,displacement performance
A.

FEATURES
Monocomponent, acetoxy curing, fast curing speed, low modulus, high displacement performance, excellent adhesion.
Excellent weather resistant performance and excellent ageing resistant performance. The service life can be over 50 years in the condition of general weather.
excellent resistance to low and high temperature change, little changes of performance at -40°C~150°C

B

.USES
Used for various doors and windows installation
Sealing for Aluminum and Glass-curtain-wall
Used for other constructional and industrial area

C .TECH INDEX
Test item
GB/T14683-2003
Actural Test value
Test method
Density (g/cm3)
0.97
1.0+0.03
GB/T13477
Tack-free time (min)
≤180
5~20
Suring speed (mm/24h)
/
2~3
Sagging degree(N type )(mm)
3
0
Extrusion performance (ml/min)
≥80
284
Hardness (HsA)
/
25
GB/T531
Tensile Strength in adhesion(Mpa)
≤0.4
0.337
GB/T13477
Elasticity Recovery (%)
≥80
95.5
Elongation at break (%)
/
230
Certain Adhesion
No destroy
No destroy
Loss of weight (%)
≤10
3.3
ASTMC792
Store
Store in the cool and dry place at -20~30oC

D.COLOR AND PACKING
Color : transparent, aluminum, black, white , brown and other colors as customer’s request.
Packing: M-910 packed in 310ml cartridge ( net weight: 300ml )

E.STANDARD
GB/T 14683-2003
Silicone building sealant
F .APPLICATION
Detailed operation procedure please note “The Technology Instruction of Jianhua
Silicone sealant
”

Project photos

M-920 Acid glass silicone sealant

M-920 Acetoxy glass silicone sealant :
1)manufacturer
2)single-component
3)acetoxy curing
4)fast curing speed
A. FEATURES
Monocomponent, acetoxy curing, fast curing speed, low modulus, high displacement performance, excellent adhesion.
Excellent weather resistant performance and excellent ageing resistant performance. The service life can be over 50 years in the condition of general weather.
excellent resistance to low and high temperature change, little changes of performance at -40°C~150°C
B .USES
Used for various doors and windows installation
Sealing for Aluminum and Glass-curtain-wall
Used for other constructional and industrial area
C .TECH INDEX
Test item
GB/T14683-2003
Actural Test value
Test method
Density (g/cm3)
0.97
1.0+0.03
GB/T13477
Tack-free time (min)
≤180
5~20
Suring speed (mm/24h)
/
2~3
Sagging degree(N type )(mm)
3
0
Extrusion performance (ml/min)
≥80
284
Hardness (HsA)
/
25
GB/T531
Tensile Strength in adhesion(Mpa)
≤0.4
0.337
GB/T13477
Elasticity Recovery (%)
≥80
95.5
Elongation at break (%)
/
230
Certain Adhesion
No destroy
No destroy
Loss of weight (%)
≤10
3.3
ASTMC792
Store
Store in the cool and dry place at -20~30oC
D.COLOR AND PACKING
Color : transparent, aluminum, black, white , brown and other colors as customer’s request.
Packing: M-910 packed in 310ml cartridge ( net weight: 300ml )
E.STANDARD
GB/T 14683-2003
Silicone building sealant
F .APPLICATION
Detailed operation procedure please note “The Technology Instruction of Jianhua
Silicone sealant
”

M-930 Acetoxy aquarium silicone sealant

M-930 Acetoxy aquarium silicone sealant is acid fast curing ,low modulus,high displacement,excellent adhesion
A. FEATURES
Monocomponent, acetoxy curing, fast curing speed, low modulus, high displacement performance, excellent adhesion
Excellent weather resistant performance and excellent ageing resistant performance; The service life can be over 50 years in the condition of general weather
Excellent compatibility with most of building materials

B. USES
Used for glazing and joints
glass
skylight, vitrine
Sealing for all kinds of
glass
aquariums
Used for intermittently curtain wall structural assembly

C. TECH

INDEX
Performance
National Standard GB/T14683-2003
Company standard Q/JH13-2005
Measured value
Tested method
Slumpability (mm)
≤3
≤2
0
GB/T13477
Extrusion(s)
≥80
≥300
300
Tack free time(min)
≤180
≤120
40
Hardness(HsA)
/
/
52
GB/T531
Loss of heating(%)
≤10
≤8
5.0
GB/T13477
Tensile strength (Mpa)
≥0.4(high modulus)
≥0.4(high modulus)
0.542
Destroy area of adhesive %
≤5
≤5
0
Permanent set adhesion
Non destroyed
Non destroyed
Non destroyed
Adhesion after radiation of
Non destroyed
Non destroyed
Non destroyed
Adhesion of hot strss and cold pull
Non destroyed
Non destroyed
Non destroyed
Adhesion of immersion in water
Non destroyed
Non destroyed
Non destroyed
Shelf life
Store for 9 months under 20~30oC in cool,dry place after date of manufacture

D. COLOR AND PACKING
Color : transparent, aluminum, black, white , brown and other colors as customer’s request.
Packing: packed in 310ml cartridge ( net weight: 300ml )

E. STANDARD
GB/T 14683-2003
Silicone
building
sealant
.

F. APPLICATION
Detailed operation procedure please note “The Technology Instruction of Jianhua
Silicone sealant
”

Project photos

MC-183 Neutral anti-mildew silicone sealant

neutral silicone sealant, waterproof anti-mildew sealing and glazing in sanitary; many other building &Industrial uses.
A . FEATURES
Monocomponent, neutral curing, no corrosion to constructon materials such as metal, coated glass, concrete, marble , granite and most of the plastic ect.
Fast curing speed, middle modulus, excellent anti-mildew performance.
Excelllent high and low temperature resistant performance, its function is hardly changed within the temperature scope -40°C~150°C.
Excellent adhesion with most building materials and no prime need.
Excellent compatibility with other neutral silicone sealants.
B . USES
Waterproofing and anti-mildew sealing for various kitchen utensils, sanitary ware;
Sealing for marble and aluminum panel, door and window glass assembly, curtain wall gap-filling,etc.;
C .COLOR AND PACKING
Color: white, translucent and other colors as customer’s request;
Packing : MC-183 packed in 310ml cartridge ( net weight: 310ml )
D .STANDARD
China JC-T 885-2001 Anti-mildew silicone sealant
E.TECH INDEX
Test item
JC/T885-2001
Actural Test value
Test method
Other color
translucent
Sagging degrce(mm)
≤3
0
0
GB/T13477
Extrusion performance(ml/min)
≥80
221
234
Tack-free time (min)
≤180
90
50
Hardness (HsA)
/
50
28
GB/T531
Loss of weight in beating %
≤10
4.7
5.5
ASTMC792
Anti-mildew Grade
0
0
0
GB/T1741
Strentch binding strength (Mpa)
/
0.705
0.340
GB/T13477
Fixed adhesion
Non-destroyed
Non-destroyed
Non-destroyed
Store
Store in the cool and dry place at the temperature -20~30oC
F .CAUTIONS
Don’t use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Can’t use if the temperature of the surface is below 4°C or above 40°C
G.APPLICATION
Detailed operation procedure please note “The Technology Instruction of Jianhua

MC-184 multi-functional Neutral silicone sealant

1)monocomponent
2)neutral curing
3)excellant weather resisiance
4)high adhesion,mid modulus
5)high movement capability
A . FEATURES
Monocomponent, neutral curing, excellent binding capacity for constructional material surfaces of various plastic-steel doors and windows.
No corrosion to cast iron, galvanized steel and concrete.
Excelllent high and low temperature resistant performance, its function is hardly changed within the temperature scope -40°C~150°C.
Excellent compatibility with other neutral silicone sealants.
B . USES
Waterproof sealing for glass of steel-plastic door and window,;
Sealing for various installation of door and window;
Other uses.
C.COLOR AND PACKING
Color : white and other colors as customer's request
Packing : MC-184 packed in 310 ml cartridge ( net weight : 300 ml )
D.STANDARD
GB/T 14683-2003 Silicone building sealant
E .TECH INDEX

Test item
GB/T14683-2003
Actural Test value
Test method
Sagging degrce(mm)
≤3
0
GB/T13477
Extrusion performance(ml/min)
≥80
220
Tack-free time (min)
≤180
90
Hardness (HsA)
30-60
52
GB/T531
Loss of weight in beating %
≤10
4.1
ASTMC792
Stretching binding strength(Mpa)
≥0.4
0.755
GB/T13477
Maximum strength elongation %
≥120
160
Fixed adhesion
Non-destroyed
Non-destroyed
Elasticity factory %
≥80
91.5
GB/T1377
Displacement capacity %
+ 20
+ 20
ASTMC719
Store
Store in the cool and dry place at the temperature -20~30oC
F.CAUTIONS
Don’t use it as silicone structural sealant;
Unsuitable for the grease, plasticizer or solvent surfaces;
Unsuitable for bad-ventilated places because silicone sealant is easily cured after absorbing moisture in the air;
Unsuitable for frost and humid places;
Can’t use if the temperature of the surface is below 4°C or above 40°C.
G .APPLICATION
Detailed operation procedure please note "The Technology Instruction of Jianhua Silicone sealant"

Project photos