Mirror Silicone Sealant

RTV-1, Alkoxy curing, Low odor
non-corrosive on all metals.
low modulus & good adhesion
long shelf life
Characteristics
MIRROR SILICONE SEALANT is one-component, alkoxy-curing, low modulus silicone sealant with good adhesion and non-corrosive on all metals.
MIRROR SILICONE SEALANT cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.

Special characteristics
¨ Non-sag
¨ Ready gunnability at low (+5°C) and high (+40°C) temperatures.
¨ Flexible at low (-40°C) and high temperatures (+100°C)
¨ Good weatherability
¨ Low odor
¨ Good tooling characteristics
¨ Non-corrosive to metals
¨ Suitable for alkaline substrates such as concrete, mortar, fibrous cement

Color:
Transparent, Black, White, Grey,
other colors are available according customer's require

Application
DIY application (car, boat, caravan, house)
Sealing with contact with metals

Adhesion
MIRROR SILICONE SEALANT exhibits excellent primerless adhesion to most substrates, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker; metal, e.g. aluminium, steel, zinc or copper; impregnated, varnished or painted wood; and many plastics.
Users must carry out their own tests due to the great variety of substances.
The adhesion can be improved in many cases by pretreatment of the substrates with a primer.

Restrictions on use
MIRROR SILICONE SEALANT may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.
MIRROR SILICONE SEALANT is not recommended for applications involving contact with natural stone, such as marble, granite, quartzite, as it can cause staining.
MIRROR SILICONE SEALANT is not recommended for sealing of aquaria.
MIRROR SILICONE SEALANT is not recommended for structural glazing bonding.
The curing time can be extended at lower temperature, low humidity or by low volume of air change.

Package:

Content
Package size
Boxes size
Boxes/pallet
Cartridge
300ml
24
305(L)*205(W)*240(H)mm
72

Shelf Life
At least 12month

Storage
Please keep the product stored in a cool (below 25°C), dry place in moisture-tight original container.
The best before date of each batch is shown on the package.

Product data
Property
Unit
Value
Density at 23C
[g/cm3]
0.98
Consistency

Non-sag
Extrusion rate at 23C
[ml/min]
650
Skin-forming time at 23C/50% r.h.
[min]
20
Hardness, Shore A
SHA
20
Tensile strength
[N/mm2]
0.4
Ultimate elongation
[%]
600
Modulus at 100% elongation
[N/mm2]
0.3
(These figures are intended as a guide and should not be used in preparing specifications)