Flange Sealant
Thread Locker / Anaerobic Adhesive
Thread Locking Sealant
Nut Locker
Steel Locker
PRODUCT DESCRIPTION:
JIAYUAN Flange Sealant: cures when confined in the absence of air
between close fitting metal surfaces. It seals close fitting joints
between rigid metal faces and flanges and will flex with minor
flange movements. Provides resistance to low pressures
immediately after assembly of flanges. Typically used as a
form-in-place gasket for pumps, thermostats, compressors,
transmission housings and axle covers.
Directions for use
1. For best performance bond surfaces should be clean and
free from grease
2. The product is designed for close fitting flanged parts with
gaps up to 0.25 mm
3. Apply manually as a continuous bead or by screen
printing to one surface of the flanges
4. Low pressures (<0.05 MPa) may be used when testing to
confirm a complete seal immediately after assembly and
before curing
5. Flanges should be tightened as soon as possible after
assembly to avoid shimming
No comments:
Post a Comment