Low volatility low odor cure room temperature vulcanizing silicone sealant SC-1103

Low volatility low odor cure silicone sealant
1.low odor cure
2.room temperature vulcanizing
3.low volatility
Low volatility low odor cure room temperature vulcanizing silicone sealant SC-1103

PRODUCT DESCRIRTION
SC-1103 provides the following product characteristics:
Technology
Silicone
Chemical type
White viscous paste
Appearance (uncured)
Translucent liquid
Components
One component - requires no mixing
Cure
Room temperature vulcanizing (RTV)
Specific benefit
Flame retardant
Applications
Sealing and gluing

KEY FEATURES
Flame retardant
Low volatility
Non-corrosion to metals; meets MIL-A-46146B corrosion test
Fast cure
Low odor cure; releases an alcohol vapor during cure
Primerless adhesion to many substrates

TIPICAL PRODUCT DATA
TYPICA
L UNCURES PROPERTIES
Appearance

White viscous paste
PH

7.2
Tack-free time(23°C)
min
3
TYPICA
L CURED PROPERTIES
(7DAY
S @ 23
°C
/50% RH)
Appearance

Elastic rubber
Specific gravity

1.45
Hardness
Type A
70
Tensile strength
MPa
2.58
Breaking elongation
%
88
Shear bond strength
MPa
2.5
Volatile siloxane
Wt %
0.028
Dielectric strength
KV/mm
20
Volume resistivity
M •m
2*10
7
Dielectric constant(50Hz)

3.8
Dielectric loss(50Hz)

0.005

GENERAL INSTRUCTIONS AND PRECAUTIONS
Avoid getting uncured material in the eyes, take eye protection at all times when working with this product.
Extended contact with the skin can cause irritation and should be avoided.
Wear protective gloves when working with this product.
Maintain good ventilation in the workplace at all times


DIRECTIONS FOR USE
For best performance bond surfaces should be clean and free from grease.
Full performance properties will develop over 72 hours.
Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
Excess material can be easily wiped away with non-polar solvents

STORAGE
Store in a dry, cool place away from direct sunlight Optimal Storage: 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Note
The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.