Marble Adhesive

Marble Adhesive
1) premium grade deformable
2) polymer modified
3) cement based marble adhesive
Marble Adhesive

Technical Characteristics
1. White/grey powder composed of cement,
2. special fillers based on recycled materials synthetic resins and special additives.
3. Easily workable with exceptional coverage.
4. Short setting time

Marble Adhesive
Model
C1TE
Materials
Cement based marble adhesive
Appearance
Grey or white powder
Potlife
Approx. 60 minutes at 20 °C
Environmentally friendly
Non-toxic and non-harmful

Dosage

The dosage differs according to the actual condition of the project.

About 1.7kg/m2 if the 3 X 3mm scraper is used
About 3kg/m2 if the 6 X 6mm scraper is used
About 4.5kg/m2 if the 10 X 10mm scraper is used
Few dosages for the even surface
Theoretical Application Rate
2~3kg/M2

Warnings
The best storing temperature is 5-40°C and it must be sealed.
Direct strong light and frost are not allowed.
It does not belong to dangerous chemicals
Shelf life
Up to 12 months in unopened bags,
stored in an elevated, cool dry place

Where To Use
1) For interior and exterior floor and wall installations,
2) suitable for all ceramic tile types, mosaics, porcelain, natural stone, fully vitrified and quarry tiles, over most traditional,
3) well prepared substrates including fully cured concrete and render, plasterboard and fiber cement sheeting.


Application
1) Subsrate
2) Apply Marble Adhesive

3) Stick Tiles

4) Apply CG2 Coloured Grout

5) Cleaning