Pollution-free
Environmental Protection
Non-toxic
Product Description
Tile Adhesive
Features
1. Well water-protective; Don't need to soak the brick and wall to improve work efficiency.
2. Excellent adhesion, both to the wall and to the paint.
3. Maximum protection against leakage caused by moisture saturation; Excellent resistance to corrosion.
4. Excellent elasticity, shrinking-free, no bubbles;
5. Its 3 times working speed than the traditional working way.
6. Convenience to use; Non-toxic
Surface preparation
All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and any other loose or contaminating materials.
Stir and mix
Add clean water to a bucket, then slowly add tiles powder to the water. Stir the mix with electrical drill-mixer until a lump-free consistency is achieved. Allow the mix to stand for 3 to 5 minutes. Re-stir then use the tile adhesive. The mixing ratio is 25 kg powder to 7 liters of water.
Application
Scrape the mixing(thickness is about 3mm) on the surface with scraper; Each scraping area is about 1 square meter; Then use scraper(10mm*10mm) to cut the surface to rack gear shape. Scrape the mixing(about 3mm) on tile; If there is deep lines or slot, tile adhesive should be added on the back of the tiles.
Precautions
1. Make sure vertical and horizontal veracity of the surface before working.
2. The marble must be sticked on the surface within drying time.
3. Must be adjust the marble within adjusting time in order not to effect the intention.
4. Dispose redundant marble adhesive before hardening.
5. The floor should be opened to light foot traffic or grout after 24 hours following the process.
6. Dont apply marble adhesive in temperatures above 40 degree or below 5 degree.
7. Dont allow the adhesive to skin prior to laying the marble. If the adhesive skins, remove and dispose of it, then re-apply fresh adhesive.
Remark
Main ingredient: Concrete macromolecule polymer
Package: 25kg/ craft bag
Storage: Shelf life is minimum 1 year when stored in covered
And dry environment.
Packing:
25kg/Bag
Model NO.:
MB-01
Productivity:
500 Ton / Day
Unit Price/Payment:
FOB Negotiation
HS Code:
2523210000
Trademark:
MEBONG
Origin:
Guangzhou, China
Min. Order:
5 Tons
Transportation:
7-10 Days
Application:
Construction
Morphology:
Water-Soluble
Material:
Polyester
Export Markets:
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
No comments:
Post a Comment