Hydrocarbon resin C5 for Hot Melt Adhesives

Hydrocarbon resin C5 for Hot Melt Adhesives
Light colour and Good fluidity
Good heat stability,High drying rate
Hydrocarbon resin C5 for Hot Melt Adhesives
Character:
As a kind of tackifying resin, C5 aliphatic hydrocarbon resin has played an important role in adhesive and sealants industries. FA5100 is adequate for hot-melt adhesive. It not only has good compatibility with SIS, SBS, SEBS, SEPS and other styrene polymers, natural rubber,synthetic rubber as well as EVA and natural tackifying resins, but also improves various
performance of adhesive in different degrees. Due to its characteristics of high racking and bonding strength, good viscosity, stable bonding performance, moderate melt viscosity, good heat resistance, good compatibility with polymer matrix and low price, it has been replacing natural resin tackifier (rosin, etc.) gradually and occupied a prominent place.
Chemical properties:

Index
Test Method
Unit
FA5100
Soften Point
ASTM E28-58
°C
95-105
Color
ASTM D-1544
#
5
Acid Value
ASTM D-974
Vol %
0.3Max
Wax Colud
ASTM D2500
°C
137Max
Specific Gravity
ASTM D71-72A
g/cm3
0.96-0.99
Melt vicosity
ASTM D3835
mpa.s
220Max
Ash Content
ETM-E-99
Vol %
0.03 Max
Application
Hot-melt Adhesive, Pressure
Sensitive Adhesive