High conductivity silicone thermal grease with RoSH test report

silicone thermal grease
1 Excellent thermal conductivity
2 Excellent electrical insulation
3 Wide operating temper
High conductivity silicone thermal grease with RoSH test report
Description
Excellent thermal conductivity depends on the heat transfer media between devices and a good interface. Silicone has low surface tension to wet most of the surface to reduce thermal contact resistance between the substrate and material resistance. SC1001 Thermal Grease belongs to a type of one-component silicon-based material. It is non-toxic, tasteless, non-corrosive, Wetting, without precipitation.
Main Features
1. Excellent thermal conductivity (heat dissipation).
2. Excellent electrical insulation, using stability, and construction performance.
3. Wide operating temperature.
Usage
Clean surface:

Clean surface, remove rust, dust and oil and so on.
Coated with silicone grease: Apply thermal grease evenly on the surface of the device.
Typical Usage
It can be widely used in the heat transfer medium of electronic components, such as the CPU chip, power blocks, transistor, thyristor and diode and the substrate (aluminum, copper).
performance data

Unit
APS SC1001
Appearance

White cream
corrosion

No corrosion
Penetration
1/10mm
200-300
Proportion

2.2
Temperature range
°C
-60-+280
Oil scatteration
% / 200°C8HR
≤1.8
Volatility
% / 200°C8HR
≤1.9
Thermal conductivity
[W/(m*K)]
1.2

Store
1. In a dry and cool place, avoid direct sunlight.
2. Out of the reach of children.
3. Clean the surface to get the best thermal performance.
4. In case of contact with eyes, please clean with water, and go to hospital.
5. Avoid prolonged contact with skin.
6. General storage period is two years.
Package
45mL/tube, 100mL/tube, 1kg/can.