Hot Melt Adhesive for pocket spring in mattress

Hot Melt Adhesive
1.for pocket spring in mattress
2.Shape:block 500g
3.Cold resistance -18degree C
4.Easily melting
Hot Melt Adhesive for pocket spring in mattress

1.Hot melt adhesive Feature:
Cold resistance -18degree C and easily melting
.

2.Application:
Hot Melt Adhesive for pocket spring in mattress

3.Technical data:

Properties
Specification value
Test Method and equipment
Shape
Light yellow in block
Visual
Solid Content
100%

Base
High polymer

Soften Point
80±5°C
GB/T 15332
Softening point tester
Viscosity
900±200cps@180°C
SNB-2 Digital Rotational Viscometer, 27# rotor test
Recommend working temperature
150-170°C

usage
Hot Melt Adhesive for pocket spring in mattress



4.Storage period:
2 Years (indoor, unexposed to the sunlight, not more than 40 degree)

5. Method for clearing equipment:
You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 degree.After clean-up, flush it by the same hot melt adhesive not more than degree.

6.Safety Precautions:
To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180degree . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt.