Hot Melt Adhesive for Baby diaper

Hot Melt Adhesive for Baby diaper
1.Shape:block 500g each piece
2.Strong Peeling strength
3.Hot melt adhesive
4.Good quality
Hot Melt Adhesive for Baby diaper

Hot Melt Adhesive

Hot Melt Adhesive
Feature:
strong Peeling strength, excellent anti-aging properties, good Elasticity, low temperature in use and energy saving, avoid the problem of adhesive carbonization due to high temperature.

Hot Melt Adhesive
Application:
Low temperature construction adhesive used on baby diapers or sanitary napkin
.


Hot Melt Glue Adhesive
Technical parameters:



Working temperature:
120-140 degree

Storage period:
2 Years (indoor, unexposed to the sunlight, not more than 40 °C)

Method for clearing equipment:
You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 °C.After clean-up, flush it by the same hot melt adhesive not more than 170 °C.

Safety Precautions:
To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180°C . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt.

Package:
For adhesive in block shaped, each piece is about 500g and packed by release paper, then put in paper carton, 20Kg/CTN

Properties
Specification value
Test Method and equipment
Shape/Appearance
Light yellowish transparent in block
Visual
Solid Content
100%

Base
High polymer

Soften Point
75±5 degree
GB/T 15332 Softening point tester
Viscosity
700±150CPS at 160 degree
SNB-2 Digital Rotational