RTV SILICONE SEALANT

A high performance silicone sanitary sealant containing anti-fungal compounds to prevent mould growth in areas

NEUTRAL SILICONE SEALANT
(Mildew resistant silicone sealant)
A high performance silicone sanitary sealant containing anti-fungal compounds to prevent mould growth in areas subject to high humidity levels.
KALI6200 Sanitary Sealant in low-maintenance applications in hotel and leisure facilities. Use for water proofing joints between ceramic tiles, baths, and basins, showers, worktops and counters. Bedding in sinks to kitchen tops and vanity units. Sealing between ceramic floor tiles and walls in wet areas. General use in wet and humid areas where fungal resistance is a requirement. Sanitary Sealant offers excellent adhesion to many non-porous surfaces. Will last up to 20 - 25 years provided manufacturers instructions are followed.
Use:
1. High performance - high modulus, neutral silicone sealant.
2. Low maintenance.
3. Fungal resistant.
4. For hotel and leisure facilities, and premium domestic installations.
5. Conforms to BS5889 (B) and ISO 846 Part A and B.
6. Prime bare metals, marble, concrete, stone and timber before sealing. Not for use with aquaria.
Instruction
clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
make sure fill the interface with it and tightly stick to the base material .
deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; a nine-month guarantee
Packing Specification: 280ml, 300ml or 310ml (net capacity) hard package (the actual weight is subject to final products)
Optional Color: transparent, black and white
Testing Standard: GB/T14683-2003 Silicone Building Sealant
NO.
Item
Data
1
Type
Neutral
2
Density g/cm
3
0.98
3
Capacity movement
±30%
4
Skin formation
5-10 minutes
5
Curing Rate (2mm/h)
6-8
6
Drying(4mm/h)
10-13
7
Volatile content
39
8
Hardness shore A
25±2
9
Elongation at Break(%)
≥600
10
Modulus Mpa(100%)
0.60
11
Application temperature
-20 to +40
12
Temperature resistance
-50 to +100
13
adhesive
OK
14
Weatherproof
OK
15
Cold-hot adhesive
OK
16
Under water adhesive
OK
17
Elastical Recovery
96
18
Mass-loss Rate
8
Skin drying time and fully drying time under: 23 and 50% humidity