Polyurethane Adhesives

Single Component, Wet Solidification, and No Dripping for Vertical Plane Construction;
Elastic, Good Initial Adhesion, and Mo
Usage
XP-80 is suitable for direct glazing applications in both OEM and repair markets.
Technical parameter
Item
XP-80
Appearance
Black Cream
Surface Dry Time(min)
20-60
Solidifying Rate(mm/24h)
≥3.0
Density(g/cm3)
1.25±0.05
Viscosity(g/min)
20-40
Solid Content(%)
95
Hardness(HA)
≥45
Breaking Strength(Mpa)
≥3.5
Breaking Elongation(%)
≥350
Shearing Strength(Mpa)
≥2.5
Tearing Strength(Mpa)
≥15
Product Features
Single Component, Wet Solidification, and No Dripping for Vertical Plane Construction
Elastic, Good Initial Adhesion, and Moderate Intensity
Good Gap-filling Capacity
Short Drawing Wire When the Gluing Stops
No Corrosion on Base Material, No Penetration Pollution
Little Volatile Odor
Good Ageing Resistance



alcohol solution such as gasoline as soon as possible. If the glue has solidified, the blade shall be used to cut or grind.
Packaging
Aluminum Barrel Package: 310ml/piece
Soft Package: 310ml, 400ml, 600ml/piece
Big Barrel Package: 55 galon
Transportation and Storage
Kept Dry and Kept away from the Direct Exposure of Sunshine
No Pressing, Collision or Abrasion
Kept in Cool Places, and Avoiding the Fire
Recommended Storage Temperature: 5°C-25°C, Moisture: under50%RH
Guarantee Period: in the original package and under the above-mentioned conditions: 9 months for aluminum barrel package, 6 months for soft package, and 9 months for big barrel package.
Cautions
Since the cleaning and activating agent and the primer are inflammable and highly volatile, they shall be kept away from fire, and the ventilation of the construction environment is required. No contact with the skin or the eyes. If inadvertent contact happens, rinse with a large quantity of clean water and see the doctor.
The pretest is the necessary condition for the good adhesion.
Contact us for clarification of any questions.


Product Features
Single Component, Wet Solidification, and Convenient Application
Fast Drying, and Less Waiting Time
No Corrosion and Penetration Pollution on Base Material
Good Aging Resistance Property
Usage
Prior to the application of primert, shake the aluminum bottle forcefully to ensure the even mixture through the impacting of steel balls in the bottle. Pour a proper quantity of the agent into a special container (the original package shall be sealed immediately), and use the brush or absorbent cotton to evenly apply the primert on the adhesive surface that has been cleaned and activated. Dry completely (about 5 minutes, depending on the actual temperature and moisture condition).
Packaging
Aluminum Bottle Package: 100ml.250ml and 1000ml.
Transportation and Storage
Keep Dry
Kept in Cool Place and Kept Away from Fire
Frost Susceptibility: N/A
Recommended Storage Temperature: 5°C-25°C
Guarantee Period: 6 Months in the Original Package
Important Notice
The illustration of our products stated above is based on our current knowledge and practical experience. According to different operational environment and target, the operational process may be different. Therefore, we sincerely propose: prior to the application of our products, sufficient experiments shall be conducted in advance to ensure the products to conform to the construction process. We refuse to be responsible for any consequences caused by any purposeful act, any behavior against the technical regulations or oral expressions.