Pipe Wrap Tape

Pipe Tape, Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrap Tapes, Pipe Wrapping Tapes for Water Gas Oil Pipe Coating.
Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) System Description:
The T-300 series is cold applied pipe wrap tape coating systems for anticorrosion of field joints, fittings, and specifically piping. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.
T-300 Joint Tape (Pipe Wrap Tape, Pipe Wrapping Tape, Pipe Wrapping Tapes) Series Coating Systems with AWWA C-214 Standard:

Type of Joint tape (Pipe Wrap Tape):
T-365
T-380
T-3100
T-3130
Thickness
(ASTM D 1000)
mm
mil
mm
mil
mm
mil
mm
mil
0.64
25
0.76
30
1.02
40
1.27
50
Tensile:
31 lbs/in
31 lbs/in
41 lbs/in
52 lbs/in
Length:
40 Meter
30 Meter
25 Meter
20 Meter
Width:
2, 3, 4, 6, 9,12
Colour:
Black, White, Red, Blue, Purple, etc.
Elongation:
300%
Peel Adhesion to Prime Pipe:
(ASTM D 1000)
230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8)
0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249)
0.2g/100in
2
/24h, 0.3mg/cm
2
/24h
Water Absorption: (ASTM D570)
≤ 0.1
Volume Resistively: (ASTM E257)
2.5 X 10
12
ohm·cm
Dielectric Strength: (ASTM D 149)
40 KV
Temperature Range:
(Normal in Ground Service)
-30 to 160
o
F, -34 to 71
o
C