New Zhongrun 1100 aluminum windows and doors-specific silicone sealant

Professional manufacture .High quality and good price.
1. Features
•New Zhongrun 1100 aluminum windows and doors-specific sealant is the single component, neutral, room temperature curing, middle modulus, fast curing speed ,with good adhesion performance to many base material. Is a green building materials;
• Has excellent resistance to weather, in the range of -50 °C -100 °C with little change in performance;
• Has good compatibility to the silicone sealant and weather sealant of neutral series of our company;
• Available in black, white, gray and other colors, the color of user requirements can also provide.

2. Main application
•Avariety of sealing doors and windows sealed.
• All kinds of interior decoration sealing seal.

3. Technical Specifications
Droop degrees (mm)
Extrusive characteristic
(ml/min)

Tack-free Time (min)

Shore hardness (A)
100% Tensile modulus
(Mpa)
23°C
-20°C
Tensile-
strength
(Mpa)
Elongation at break %
0
326
7
21

0.34
0.46
0.79
380
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.

4. Construction Summary
• Should not be used for structural bonding and assembly.
• Does not apply to all leaking oil, plasticizer or solvent material surface.
• Should not be used for confined space or direct contact with the surface of food or drinking water.
• Base material surface temperature is below 4 °C or higher than 40 °C, could not construction.
• Should not be used for exterior concrete or limestone walls, glued joints between aluminum plate bonding.

5. Application restrictions
• Can not be used for structural silicon sealant, and unsuitable to be used to the surface which may be leaking oil, plasticizer and solvent, long-time flooding or continuous moisture place.

6. Safety Tips
• Weathering plastic curing process will release low molecular weight substances, the construction site must ensure ventilat to avoid that excessive concentration of volatiles to make people uncomfortable. (After curing will without any damage to body.)
• The weathering plastic of uncured must avoid contact with eyes, if contact with eyes, rinse immediately with plenty of water, and seek help to doctor..
• Do not let children touch when uncured, if eats by mistake carelessly, should seek help immediately to doctor

7. Technical Service
Offer the integral technical data of the
adhesive

8. Storage period
Storage temperature should be stored at 5-27 °C, relative humidity less than 50% environment, from the date of production, storage of 9 months.

9. Implementation of standards
GB/T14683-2003 Hardware support: 300ml Soft Packet: 590ml