Neutral RTV gasket maker

Ideally Suited for Intake and Exhaust
Manifolds, Headers, Thermostat Housings, etc.
the series of neutral silicone sealant after years of research.
Neutral silicone sealants in current market are packaged in aluminum
an not be totally addition to the net. As a result,
the tails are easy to dry agglomeration. And the New neutral silicone
sealant is succeeded in overcoming this shortcoming.
A ) Long life .18months at least . As you know the neutral silicone is very easy to dry in the aluminum tube . But now, We conquer this shortcoming.
B) skin curing time is 5minutes ( shorter than other neutral which is 45minutes at least)
C) have no terrible odor .
D)lowest price
E)high density .
F)tensile strength is better than acid one.
G)good elongation
Instructions:
For best result,apply the sealant between +5 and +40.Surfaces must be clean,
dry,oil and frost free.The joint width must be min 5mm and max 30mm.The sealant
must be tooled immediately after the application before a skin forms.Excess uncured
sealant may be cleaned with solvent.Cured sealant can be reomved barely mechanically.
Notes:
A) Leave thickness for gasket when reassembling.Don't over-tighten the bolts.
B) Use with adequate ventilation.
C) Replace the cap after use.
D) If inhaled in over a prolonged period or in large volumes,the application must
take place in a well-ventilated room.Prolonged contact with uncured sealant must be avoided