Neutral Antifungus Silicone Sealant OLV11

1, one part, neutral cure
2, antifungus especially for kitchen and bathroom; GP
3, high performance, one of best sellers
Description:
OLV11 Neutral Antifungus Silicone Sealant is a one part, neutral cure, silicone sealant that exhibits mildew resistance properties and for professional uses; It is formulated for uses in locations, where higher humidity is expected such as bathroom kitchen; and seals and waterproofs concerned facilities.

Main purposes:
1. Exhibits mildew resistance properties and for professional uses;
2. Formulated for uses in locations, where higher humidity is expected such as bathroom, kitchen, and seals and waterproofs concerned facilities.

Characteristics:
1. One-part; Room temperature; Neutral curing silicone sealant;
2. Neutral cure, non-corrosive to sensitive substrates;
3. For porous and alkali substrates (e.g. marble, granite, ceramics, plasters, etc);
4. Resistant to common domestic (non-corrosive) detergents.

Application:
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.

Limitations:
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Cant be used if the temperature is below 4°C or above 50°C on the surface of the material.

Shelf life: 12 months if keep sealing, and stored below 27
0
C in cool, dry place after the date of production.
Volume: 300ml

Technical data:
The following data are only for reference purpose, not intended for use in preparing specification.

OLV11 Neutral Antifungus Silicone Sealant
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±2
0
C:
Density (g/cm
3
)
±0.1
0.97
GB/T 13477
Tack-Free Time (min)
≤180
10
GB/T 13477
Extrusion (ml/min)
≥80
789
GB/T 13477
Tensile Modulus (Mpa)
23
0
C
0.4
0.41
GB/T 13477
20
0
C
or 0.6
/
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
≤3
0
GB/T 13477
Curing Speed (mm/d)
2
3
/
As Cured -After 21 days at 50±5% RH and temperature 23±2
0
C:
Hardness (Shore A)
20~60
32
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.57
GB/T 13477
Elongation of Rupture (% )
/
241
GB/T 13477
Movement Capability (%)
20
20
GB/T 13477
Mildew Proofing Class (grade)
0,1
1
GB1741
Storage
12 Months