New Huijia 228 acid glass silicone sealant

High quality and good price. The silicon sealant has passed ISO9001 international system certification.
1.Features:
New Huijia 228 acid glass silicone sealant is the single component, acetic type, room temperature curing, high-quality silicone sealant, easy to use, fast curing, has excellent resistance to weather, with good adhesive properties to a variety of building materials. Widely used in glass, aluminum, ceramic, glass fiber, non-oily wood and glass doors and windows and other works of the bonding and sealing, can not be used as a structural sealant.
2.Instructions for use
• Clean the surface of the material which need bonding with acetone or other solvents.
• Labeled low viscosity adhesive tape to the site where need to protect , trim and remove the tape before the adhesive curing.
• The user must determine the product suitability themselves, should be bonded on-site compatibility test, to confirm whether there is a good product and substrate bonding and the gap is actually played, the Company takes no responsibility for any accident caused damage .
•Ensure that the glass sealant has been full of the crack.
• 10 minute surface cure, non-stick hand within 1 hour, 7 days full cure and optimum strength.
• Uncured sealant can be used solvents (eg turpentine) to clear ,the excess curing adhesive can be removed with scraper.
3.Safety glass
Ensure that the construction site must keep good ventilation, if contact with the eyes should be washed immediately with plenty of water and ask to the doctor for help, keep the children out of reach the adhesive.
4. Implementation of standards
GB/T14683-2003 Hardware support: 300ml Soft Packet: 590ml

5.Storage period
Storage temperature should be stored at 5-27 °C, relative humidity less than 50% environment, from the date of production, storage of 9 months.

6.Technical Specifications
Droop degrees (mm)
Extrusive characteristic
(ml/min)

Tack-free Time (min)

Shore hardness (A)
100% Tensile modulus
(Mpa)
23°C
-20°C
Tensile-
strength
(Mpa)
Elongation at break %
0
326
7
21

0.34
0.46
0.79
380
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.