New Huijia 288 large plate glass silicone sealant

Professional manufacture .High quality and good price. The silicon sealant has passed ISO9001 international system certification

1. Features
• New Huijia 288 large plate glass sealant

is a versatile, weathering resistance acidic glass adhesive; for the glass seal and general building materials.
• Can be applied to a large plate glass, lighting glass roof structural engineering.
•With good adhesive properties to several construction material, all types of glazing works sealing.
• Can be used for doors and windows, and the aquarium installation and interior decorative glass sealing structure sealing.


2.Main use
large flat glass, fish tank, light, bonding and sealing the top of the glass component works, doors, windows and all-transparent glass component assembly, a variety of other equipment, works of glass sealing.


3. Instructions for use
•The surface of using keep clean and dry (like solvent), remove any impurities or sealant residue ,use the solvent clean, when use the flammable solvents, please notice the use restrictions.
• Cover the adjacent surfaces with masking tape, for later sorting, cleaning, and cut the nozzle into desired size, connected to the hose, both sides of the sealant should have good contact with the interface to ensure the interface can be full filled with sealant.
• Before the sealant curing, torn the tape off.
• The sealant surface cure within 10 minutes, 1 hour non-stick hand, fully cured after 7 days, and to the best strength.
• Uncured sealant can be used solvents (eg turpentine) to clear, the excess curing adhesive can be removed with the scraper .


4. Safety Tips
Contact with uncured sealant directly will stimulate the skin and eyes, excessive exposure to the gas distribution curing environment will stimulate the eyes, nose and throat. Avoid contact with skin. Used in a well ventilated area.,and use the appropriate gloves.



5. Technical Specifications
slump (mm)
Extruda-
Bility((ml/min)

Tack-free Time (min)

shore hardness (A)
100% ensile modulus
(Mpa)
23°C
-20°C
tensile strength
(Mpa)
elongation at break %
0
350
7
25

0.28
0.35
2.3
540
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.


6. Technical Service
Offer the integral technical data of the
adhesive


7. Implementation of standards
GB/T14683-2003 Hardware support: 300ml Soft Packet: 590ml

8. Storage period
Should be stored in a cool dry place, storage temperature is below 27 °C, storage period of 9 months.