RTV Silicone Gasket Maker-High Temperature

Gasket Maker;Silicone Gasket Maker;RTV Gasket Maker; RTV Silicone Gasket Maker.
High Temperature
Oil Resist
Fast Cure.
PRODUCT DESCRIPTION:
SBOND Hi-Temp RTV Silicone Gasket is a singlecomponent, room temperature vulcanizing gasketing (RTV) compound designed to provide reliable “formed-in-place” gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to maintain maximum performance in a continuous temperature environment of 600°F.

PRODUCT BENEFITS



TYPICAL APPLICATIONNS


High temperature use
Drive housings
Superior adhesion and flexibility
Exhaust manifolds
Replaces most cut gaskets
Thermostat housings
Can be used as a gasket maker or dressing
Valve covers
Easy application
Timing gear covers
Non-flammable
Water pumps
Non-toxic
Differential covers
DIRECTIONS FOR USE:
For assembly as a form-in-place gasket
1. Remove all previous material from mating surfaces. SBOND Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
2. For best results, clean and dry all surfaces with a residue-free solvent, such as SBOND Brake and Parts Cleaner.
3. Cut nozzle to desired bead size, 1/16“ to 1/4“ in diameter. An 1/8” bead is usually sufficient for most applications.
4. Remove cap, puncture tube or cartridge seal and attach extension nozzle.
5. Apply a continuous and even bead of silicone to one surface, first tracing the internal areas of the gasket configuration, then all surrounding bolt holes a shown.