ONE-COMPONET ACRYLIC CAULK

Acrylic is a one-component, elasto-plastic sealing putty based on acrylic aqueous dispersion
Product Description
Acrylic is a one-component, elasto-plastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to low stresses.

Acrylic is ready to use and gives excellent performances both in inside and outside situations, showing good adhesion on porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Not recommended for joints in continous contact with water.

Composition
Acrylic basis
Consistency
Pasty
Packing
280ml / cartridge
Printability
Acrylic can be painted in almost any kind of paint.


Typical Values

Specific weight
(1.60 +/- 0.05) g/cm
3
Skin over time
10-20 minutes
Curing time
1-4 weeks according to joint thickness, temperature and air humidity


Characteristic after hardening

Volume variation
(-12 +/- 2) %
E-module 100%
(0.31 +/- 0.02) N / mm
2
Joint movement capability in services
6% of joint width
Service temperature
- 25 C to + 80 C

Application

Surface Preparation
Surface must be clean from dust, oil, grease, bitumen and ice. Minimum joint width 6 * 6 mm / max. 25 * 20 mm.
Use diluted Acrylic (at brushable consistency), as a primer for high porous surfaces.
Acrylic will show good adhesion even on wet surfaces.
Application temperature
+ 5 C to + 50 C
Shelf Life
Up to 12 months / store cool and dry / protected from freezing and heat.
Warning
Don't apply in case or imminent danger of rain. Protect from rain for at least 6 hours after application.