HX-1300 Acetic Cure Silicone Sealan

RTV-1, Acetoxy-curing
General purpose
Fast curing, short SFT
Good adhesion
Non-yellowing
Characteristics
HX-1300 is one-component, acetic-curing silicone sealant for general purpose sealing in do-it-yourself application..
HX-1300 cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.

Special characteristics
¨ Non-sag
¨ Ready gunnability at low (+5°C) and high (+40°C) temperatures.
¨ Flexible at low (-40°C) and high temperatures (+100°C)
¨ Rapid cross-linking: quickly becomes tack-free
¨ Flexible at low(-40°C )and high temperatures(+150°C)
¨ Good adhesive to glass, vitrified surfaces, ceramic tiles, many plastics and most paints.
¨ Good tooling characteristics

Color:
Transparent, Black, White, Grey,
other colors are available according customer's require

Application
DIY application (car, boat, caravan, house)


Adhesion
HX-1300 exhibits excellent primerless adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker; impregnated, varnished or painted wood and many plastics.
Users must carry out their own tests due to the great variety of substances.
The adhesion can be improved in many cases by pretreatment of the substrates with a primer.

Restrictions on use
HX-1300 is not recommended for use on substrates, such as marble, concrete, fibrous cement and mortar, as the product releases acetic acid during curing.
HX-1300 may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.
HX-1300 should not be used in contact with metals such as lead, cooper, brass or zinc due to corrosion.
HX-1300 is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.
HX-1300 is not recommended for sealing of aquaria.
HX-1300 is not recommended for structural glazing bonding.
The curing time can be extended at lower temperature, low humidity or by low volume of air change.

Package:

Content
Package size
Boxes size
Boxes/pallet
Cartridge
300ml
24
305(L)*205(W)*240(H)mm
72

Shelf Life
At least 12month

Storage
Please keep the product stored in a cool (below 25°C), dry place in moisture-tight original container.
The best before date of each batch is shown on the package.

Product data
Property
Unit
Value
Density at 23C
[g/cm3]
0.98
Consistency

Non-sag
Extrusion rate at 23C
[ml/min]
450
Skin-forming time at 23C/50% r.h.
[min]
15
Hardness, Shore A
SHA
20
Tensile strength
[N/mm2]
0.4
Ultimate elongation
[%]
450
Modulus at 100% elongation
[N/mm2]
0.3
(These figures are intended as a guide and should not be used in preparing specifications)