Giraffe CLS-818 Silicone Sealant for Aquarium

Girafe CLS-818 is RTV-1, acexoty curing at room temperature and high intensity silicone sealant;

1. Characteristics:
Giraffe CLS-818 is RTV-1, acexoty curing at room temperature and high intensity silicone sealant;
Excellent resistance to water and weather, specially used in the adhesion and sealing for aquarium;
Transparent, no change of color even irradiated by ultraviolet radiation for a long time;
Cured silicone sealant in stable in physical and mechanical performance;
Good compatibility with other neutral silicone sealants.

2. Purpose:
Installing and joint sealing for large aquarium;
Restoring and strengthening for aquarium.

3. Main Technology Data:

Performance
Standard
Measured Value
Testing method
Slumpability (mm)
vertical


GB/T 13477
horizontal
≤ 3
0
Extrusion (ml/min)
≥ 80
120
Tack-Free Time (min)
≤ 180
15
Hardness (HsA)
20∼50
28
GB/T 531
Peel Strength N/mm
≥ 1.0
2.1
GB/T 13477
Tensile Strength in Adhesion (MPa)
≥ 0.3
0.82
Elongation at Ultimate Strength (%)
≥ 160
180
Movement Capability (%)
±25
±25
ASTM C 719
Loss of Heating (%)
≤ 5
2.8
GB 16776
Aging Test
Passed
Passed
ASTM C 793
Storage: 12 months shelf life if stored below 27 in cool, dry places after the date of production

4. Application Standard:
GB/T 14683-2003 ASTM C 920

5. Specification:
Package: 300ml in cartridge, 25pcs per carton
Color: Transparent

6. Restriction of Usage:
Unsuitable for all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the silicone sealant;
Unsuitable for the frosty or moist surface and the continually soggy or moist place;
Cannot be used the product if the temperature is below 6 or above 40 on the surface of the materials;

7. Technical Service:
Offer the complete technical data, technical consultation and free compatibility test of the products.

8. Joint Design and Working Procedure:
Please see The Technology Instruction of Giraffe Silicone Sealant.

9. Safety:
The silicone sealant will release acetoxy during curing, it will cause damage to breath system and irritation to skin and eyes if the density of acetoxy in the air is too high. So please ensure adequate ventilation at workplace or curing area;
The silicone sealant will not release any harmful substance and cause any damage to human body after cured;
Keep uncured silicone sealant beyond childrens reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor.

10. Warranty:
As an ISO9001, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.

11. Maintenance:
Generally there is no need in repair. If the seal joint is damaged, remove the damaged silicone sealant and clean the surface of the materials if necessary, then fill up with our silicone sealant. Our products have excellent adhesion to cured silicone sealant.

12. Estimated Amount of Use:
The estimated amount of use of Giraffe CLS-818 for all type of joints is given in below table:

The length (m) of each Giraffe CLS-818 (300ml) can be extruded during application

Width (mm)

Thickness (mm)
6
9
12
15
18
21
24
6
8.3
5.5
4.2
3.3
2.8
2.4
2.1
9
5.5
3.7
2.8
2.2
1.8
1.6
1.4
12
4.2
2.8
2.1
1.7
1.4
1.2
1.0

Note: The actual amount of use may be different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention:
The information contained in this instruction is correct. However, by no means can it be considered an absolute guarantee, as usage and application of the product in accordance with the instruction given and their success in application is beyond our control and is dependent on many factors. Clients should have a good knowledge of the product and make independent judgments of optimal usage before application.