HBM nonwoven synthetic latex

HBM-270 synthetic latex is a stable, easy to use and special soft-self-cross linking acrylic emulsion.This product is used as th
Physical properties of the latex
Polymer style ……. Self cross linking pure acrylics
Glass transition temperature…..About subzero -20°C
Solid Content percentage ………40+-1%
Burchfield viscosity(25 degree Celsius,No.2 rotor, every minute 60 times rotate)…………………lower than 100CP
Particle diameter……………0.1-0.2μm
Ionicity ………………………. Anionic
Minimum film forming temperature………0°C

Application method:
HAIBOMU synthetic latex HBM-270 have good thermal stability, Can be widely used in various non-woven fabric production, include: Spray adhesive nonwoven, impregnated bonded nonwoven, Impregnated foam adhesive nonwoven etc. It can be mixed with HBM-295H,then we can get appropriate hand feeling of the fabric.

Thermosetting conditions:
The right thermosetting conditions are decided by individual nonwoven products and method, in the case of general, when hot set 1 minute on condition 135-145°C,can make non-woven fabric has excellent wash ability.

Storage Conditions:
Product should be stored in a sealed container, avoid freezing and high temperature, where possible, should be used within six months.
Recommended normal storage temperature is 10-35°C.
Please send your samples to Mr Jimmy Yang.
The information is as below:
Xinhua Share CO.,LTD.Fujian
Address:Export Department Xinhua Industrial Park Niancuopu Longhu Jinjiang Fujian China
P.C.:362241
Tel: 0086-18965687680
Fax: 0086-595-85256255
Contact person:Mr. Jimmy Yang