HOT!!!!! Black silicone sealant

1.Gengeral Purpose,
2.Acetoxy cure,
3.Good adhesion to many material
4.Stable quality,
5.Long time shelf life
Company introduction:
BOYA CHEMICAL INTERNATIONAL COMPANY LIMTED is majoring in manufacturing and exporting silicone sealant.
We specialize in this field for 8 years.It is armed with advanced imported automatic equipment, adopts advanced production technology,
and established strict production and management systems. Our mission is "top quality, innovative product ,client primary and less waster."



ACETOXY SILICONE SEALANT
Characteristics:
1. One component, acetic acid RTV silicone sealant.
2. Excellent adhesion for glass and most building materials.
3. Excellent weatherproofing property.
4. Keep excellent performance between the temperature of -50
o
C~+100
o
C.

Uses scope:
1. Filling and sealing of indoor decoration engineering.
2. Building window and door glaziery.
3. Many other building and industrial uses.

Instruction for uses:
1. Make an adhesion and compatibility test between sealant and substrate prior to use.
2. Clean with solvents or suitable detergent to keep substrate completely clean and dry. Use sealant within 30 minutes after cleanness.
3. Ensure filling the joint with enough sealant and intimate contact the substrate surface. Within 5 minutes of application tool the sealant.
4. Suitable application temperature range is 5
o
C~40
o
C.

Limitations:
1. Don't use on material that bleed oils, plasticizers or solvents.
2. Not suitable for bonding seal the other metal materials or coated surface except stainless steel, fluorocarbon spraying and alumina.
3. Not suitable for bonding and sealing of mirror glass and glass coating surface.

Notices:
1. Ensure adequate ventilation environment.
2. Abide by the relative safety criteria when using solvent.
3. Keep out of reach of children.
4. In case of eye contact, rinse with clean water or seek medical help immediately.

Storage and transportation:
Keep in a cool, ventilated, dry place and the temperature is blew 27
o
C.
It belongs to non-dangerous goods .

Meet the standard:
GB/T 14683-2003


No
Item
The standard
Test result
1
Appearance
Have no grain, no agglomerations, no skinning, no bubble.
Pass the standard
2
Droop degree
mm
Uprightness
≤3
0
Level
No distortion
No distortion
3
Tack Free Time, min
≤150
10
4
Extrusion ability, ml/min
≥80
250
5
Tensile modulus
Mpa
23
≤ 0.4
0.38
6
Definite Elongation
No break
No break