Gasket cement, RTV, Silicone, adhesive

Makes most any gasket instantly
Resists cracking and shrinking
Dries tough yet flexible
Resists oil, water and anti-freeze
APPLICATION:
◊ VALVE COVER
◊ TIMING COVER
◊ MANIFOLD
◊ ENGINE

• HI-TEMP-up to 650°F (343°C)
Intermittent
• 100% Silicone - No Fillers Added
•
For Instant leakproof Gaskets on All Engines
• High Load Resistance

DIRECTIONS:...
Clean all surface thoroughly. Remove old gaskets and prepare flange surface. Dry and remove all oil and gease.
Remove cap, puncture inner seal, screw on nozzle and cut to desired size.
Apply continous, uniform 1/16 "to 1/8" bead around all bolt holes.
Wait 10 minutes for silicone to "skin over". Reassemble parts.

CAUTION:
ON CONTACT UNCURED SEALANT CAUSES IRRITATION. Avoid contact with eyes and skin.
IN CASE OF CONTACT, flush eyes with water. Call a physician. Remove from skin with a dry cloth or paper towel. Sealant releases acetic (vinegar-like odor) during curing. Use with adequate ventilation.
KEEP OUT OF THE REACH OF CHILDREN.