Flexiable reasonable price excellent LED Strip Epoxy Glue APS-EP100

1. low viscosity
2. excellent softness
3. good defoaming
4. excellent transparency
5. high adhesion
Flexiable LED Strip Epoxy Glue APS-EP100
Features
1. This product is soft epoxy resin with low viscosity, excellent softness, and good defoaming performance.
2. High softness, excellent transparency, smooth surface, and high adhesion. It is bright without bubble.
3. It is with excellent solvent resistance and toughness.
Performance
Test Item
Method and condition
A
B
Appearance
Visual test
Transparent liquid
Transparent liquid
Density
25°C g/cm
3
1.0-1.1
1.0-1.1
Viscosity
25°C cpa·s
4000-4500
30-50
Storage
Room temperature ventilated
Three months
Three months
U
sin
g technology
Item
Unit/Condition
A/B
Mixing Ratio
Weight Ratio
1:1
Up Time
25°C,100g
60min
Curing Time
°C/hrs
25°C/15-20h
1. Keep the surface dry and clean.
2. Take quantity as the ratio, and keep it be accurate. Please stir the glue fully after mixed.
3. Please use up the cured glue in the up time.
4. Please keep the environments cleaning.
Cured features
Item
Unit/Condition
A/B
Hardness
25°C,Shore-D
25-35
Flexural Strength
kg/mm
2
2.8-3.2
Tensile Strength
kg/mm
2
2.4-3.6
Elongation
%
320
Water Absorption 25
°C
%24 hours
<0.1
Note
1. The glue can be used after mixed for 10-20 minutes, so the bubble that produces after mixed can be exploded promptly.
2. The more the mixed glue, the faster the response and the curing speed. Please control the quantity of the mixed glue, because the up time will be short if the response accelerates.
3. Up time: At 25°C,the viscosity of the 100g mixed glue is double, rather than the operating time.
Please wear the gauntlet before operate. Use acetone or alcohol to wipe off if there is some glue bonding to your skin, then clean with cleaner.
Please try out with small quantity, and grasp the technique of using to avoid make a mistake.
Storage And Transportation
1. This product is non-dangerous, so it can be stored and shipped as usual chemicals.
2. Part B is easy to

absorb moisture, so you must cover it well after use.