Epoxy laminating resin

Epoxy laminating resin accepts sample order
1) good bonding
2) Excellent viscosity
3) waterproof
4) insulativity
Epoxy laminating resin
INTRODUCTION
EP106 AB is a two part potting and encapsulating compound. Typical applications include encapsulation, potting and assembly of electronic and magnetic components, such as capacitors, transformers, terminals, industrial magnets, small and large magnetic assemblies, metal detectors, metal separators, magnetic printing cylinders, magnetic holders, insulators, junction boxes, switches, circuit boards. General-purpose casting and bonding for structural and dielectric applications.
PROPERTIES

EP106A
EP106B
Color
Black, white, Clear
Clear amber
Viscosity cps/25°C
10,000~14,000
80~100
Specific gravity
15~1.6
1.0~1.1

APPLICATION CONDITIONS
Mix Ration (weight)
EP106A:EP-06B=5:1
Mix Viscosity cps/25
°C

2000~3000
Pot Life (at 25
°C
)
40min (After Mixing)
Cure
25°C×6~8h or 60°C×1h

CURED PROPERTIES
Hardness (Shore D)
88
Volume resistivity (ohm-cm)
>10
15
Surface resistivity (ohm)
>10
14
Dielectric constant (KHZ)
4.2±0.1
Compressive strength (kg/mm
2
)
>25
Bending strength (kg/mm
2
)
>10
Impact strength(kg/mm
2
/cm
2
)
>6

DIRECTIONS FOR USE
1)
Complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt and oils which can cause poor adhesion or corrosion in a bonded part.
2) Accurately weigh resin and hardener into a clean container in the recommended ratio. Weighing apparatus having an accuracy in proportion to the amounts being weighed should be used.
3) Don't touch your skin and eyes, if touch skin, washing with soap water; if touch eyes, washing with water, then get to hospital immediately.
4) Material removed from containers may be contaminated during use. Do not return product to the original container.
STORAGE
Store in original, tightly covered containers in clean, dry areas. Storage information may be indicated on the product container labeling.
Material removed from containers may be contaminated during use. Do not return product to the original container.
PACKING
20Kg/Drum