Paper coating adhesive

--Strong adhesion , good stability;
--Potato starch based,
--Easy slip for positioning
paper coating adhesive
--Extra strong adhesion , good stability;
--Potato starch based, VOC compliant;
--Smooth consistency, good liquidity;
--Easy slip for positioning;
--Less usage but more coverage.
paper coating adhesive

Base: Cold water soluble starch

This Wallpaper Adhesive is an extra strong adhesive which mixes easily to form a smooth, lump free paste. Its extra strong formula has been specially developed to give much improved brush on characteristics for easier wallpapering.

Free sample is available.

Surface preparation:
Surface must be free from grease and other residues, dry, smooth and structurally sound. Check surfaces for loose wallcovering. Repair all unsound surfaces. Recommended priming the wall surface with the primer in same series.


Mixing
1. According to Mixing Quantities table, measure out quantity of clean cold water into bucket.
2. Disperse powder adhesive into stirred water, and keep stirring for 30 seconds to disperse the powder adhesive at the bottom and absorb the water until get the ropy paste.
3. Let it swell for 8 minutes until it turns into smooth and sticky status.

Company Introduction:
BLUE WINGS WALLPAPER ACCESSORIES CO.,LTD is one of the leading wallpaper adhesive manufacturers in China, produces a wide range of wallpaper adhesive, paste and wall primer. Our products are high quality and eco-friendly.
Our factory is located in Jiangmen city, Guangdong province in China, with 120 workers, covering an area of 16,680 square meters.