PP, PE adhesive

PP,PE adhesive, 779 adhesive (glue) is a synthetic one-component self-adhesive low toxicity solvent
PE, PP adhesive (glue)
Performance and application
779 adhesive (glue) is a synthetic one-component self-adhesive low toxicity solvent, mainly
as natural resins and synthetic resins and solvents. Dedicated to all kinds of PP, PE, nylon ABS, metal, rubber materials, the adhesion between can also be used for nylon, ceramic, ABS, AS, EVA, PVC, polystyrene, polyvinyl vinyl, metal, rubber, wood, textiles, etc., and mutual self-adhesive sticky. A dry well, the strong bonding, highly flexible, user-friendly features, has good bonding strength without the special treatment by PP, PE, Nylonfor. It is the best adhesive for these materials like PP, PE, Nylonfor since it has good water, heat and cold resistance.
Color:
Light yellow
Usage
(1) Remove the residual surface oil and release agent, and keep it clean.
(2) Coating a layer of thin liquid on dry oil-free double-sided adhesive surface, it will dry for 5-15 minutes.
(3) Leave it semi-dry state, using after 24 hours.
(4) Maximum bonding strength can be achieved 2-4 days later.
Storage
:
(1) Stir it before use, close tightly after the use. Keep it in a cool, dry. Ventilated area
(2) Shelf life: one year
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties
.

Material removed from containers may be contaminated during

use. Do not return product to the original container. HYBOND

Corporation cannot assume responsibility for product which
Was contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.