PSI Aqua mend binder
1.advanced adhesive with sound stickiness quality.
2.dissoluble and dis-shrinking under water
PSI Aqua mend binder
application:
1.
suitable for many materials with wet surface material or under water.
2.
can repair or cohere joint, cavity, cut, or scratch on glass fiber reinforced plastics car body, boat body and other material container, tube.
3.
can repair shell of storage battery, and insulation, seal electrical equipment, and splice PVC plastic.
PSI
Aqua mend binderFeatures:
1.
advanced adhesive with sound stickiness quality.
2.
dissoluble and dis-shrinking under fresh water or salt water.
3.
It will not drip and flow
4.
It is easy to use.
usage:
1 before use, it is needed to clean rust or oil of the repair part
2. take out of the needed quantity glue stick,And mix inner part and outside part together.
3.Tps:
you can also mix with pigment so the adhesive color will be the same with the repair material.
4.Compacting the glue in the repair part, and trying to extrude it in the cave or hole.
Under damp or dripping occasion. it is needed to compact for a while until the adhesive begins to solid.
parameter:
max temperture:121°C/149°C
hardness after 24 hours:56-75D shore
Tensile strength:5.5-6.9MPA
Chemical resistance: Oil, alcohol, ketone, hybrocarbon,
Saline solution, weak acid, weak base
Reduction rate: below 1%
Electric resistance:30000
MΩ
Insulation strength: 11.8
kV/mm
Non-volatile content: 100%
No comments:
Post a Comment