KTR 900 ULTRA CLEAR CAULK

KTR 900 ULTRA CLEAR CAULK
HIGH PERFORMANCE SILICONIZED ACRYLIC SEALANT
40 YEARS WARRANTY

KTR 900 ULTRA CLEAR CAULK
HIGH PERFORMANCE SILICONIZED ACRYLIC SEALANT
40-Year Warranty
(ASTM C 834-91)

PRODUCT DESCRIPTION
: A one-component, high-performance, elastomeric sealant with the permanent adhesion and UV resistant properties of acrylic plus the permanent flexibility and lifetime durability of silicone. A high quality caulk will not crack, crumble or peel, even when exposed to severe weather or total joint movement; for interior or exterior use.

BASIC USES: KTR 900 ULTRA CLEAR CAULK
provides a waterproof and weatherproof seal, adhering tightly to interior and exterior surfaces, even to ceramic and glass substraters. Excellent for siding corner joints and caulking around windows, doors, skylights, vents, air ducts and chimneys.

PRODUCT ADVANTAGES:
*Interior / exterior
*40-year warranty
*Non-yellowing
*Seals in concrete, drywall, wood and metal
*100% odor free
*100% flexible
*100% silicone durability
*100% clear
*Mildew and moisture resistant

TECHNICAL DATA

Percent Solids: 59.56±1% by weight
55.59±1% by volume
Colors: Clear
Weight / Gallon: 8.86±0.5 lbs
Viscosity: 175,000 195, 000 cps.
Flash Point: Non-flammable
Sizes: 5.5-oz. Cartridge
Drying Time: To touch: 15 minutes

Theoretical Coverage: Approximately seven linear feet of 1/4 bead per 5.5-oz. Cartridge.
Surface Preparation:Surface must be free of dust, dirt, grease and mildew. Remove all loose or badly cracked sealant and paint.

Mildewed Surfaces: Any existing mildew on the surface must be completely killed and removed prior to the application of new caulk. Using a long-handled brush, scrub mildewed surface with a mixture of one quart of household bleach and three quarts of warm water. Rinse completely and let dry.

Previously Cualked Surfaces: It is critical to remove as much old sealant as possible before applying new caulk, spefially if it is cracked, eroded or pulled away from the joint.
Application Instructions: For best results, follow these steps:
(1) Knead tube well before using.
(2) Apply at temperature above 40F (5) and when no precipitation is expected within 72 hours.
(3) Cut nozzle to desired bead size (1/4 is recommended).
(4) Hold tube at 45
o
angle to the seam and push KTR900 ULTRA CLEAR CAULK ahead of nozzle, applying uniform to the trigger in order to get a smooth bead.
(5) Limit joint size to be filled to approximately 1/4. If depth of joint exceeds 1/4, use polyethylene foam or oakum as backup filler.
(6) Wipe away excess with a damp cloth before surface skins.

Cleanup: Clean up excess with damp cloth before caulk cures.

Coverage: Approximately seven linear feet of 1/4 bead per 5.5-oz. Cartridge.

Storage: Protect from freezing; store in a cool, dry place at room temperature. Product must be used within one year of purchase.

Note: Always use a sealer as shellac, before topcoating with a lacquer. Not recommended for use on horizontal surface where water may collect, or for marine use on areas below water level.

Limited Warranty: Satisfaction guaranteed for forty years. If porduct cracks, peels or separates while you own your home during periold of guarantee when used as directed, returen sales receipt and used container to KATER ADHESIVES INDUSTRIAL CO., LTD. Seller will not accept liability for mre than product replacement or purchase price.

Notice: The technical data contained herin are true and accurate to the best of our knowledge. Published technical data and instructions are subject to change without prior notice.

Note: KTR 900 ULTRA CLEAR CAULK guns out white but will dry clear; maximum clarity after thirteen days.