Joint sealer

It is suitable for indoor-outdoor decoration Joint sealing, include all the wood to wood, wood to wall, wood to plasterboard
Description
It is suitable for indoor-outdoor decoration Joint sealing, include all the wood to wood, wood to wall, wood to plasterboard, plasterboard to plasterboard

Feature

Good anti-cracking

Safe & Environment Friendly

Good adhesion

Application easily

Good weather resistance

Add pigment to mix color freely

Direction of uses

Mix ratio(it could adjust little according to the weather)
Normal Temperature, Base:Hardener=3:1
Low Temperature, Base:Hardener=10:4

Mix base and hardener evenly according to the mix ratio;

Let it rest for about 1~2 minutes then add some addition material, mix them to paste. Apply the paste into the joint and let it smooth. Apply the top and elevation again after 50 minutes.

Dry Time (25
°C
, RH:50%)
Surface dry time: 3hours
Hard dry time: 24 hours.

Note of uses
1.
The surface should be cleaning, dry and no oil.
2.
Allow 3-6 mm between tow boards. If not enough, cut the “V “joint by blade or other tools. It could add the wood filler if the joint is too big.
3.
It should be used up 40 minute.
4.
The paste should be dried and apply one coat primer when apply the next process, and prevent from yellowing.
5.
Covered and far away from fire.
6.
Far away from the solvent and water.
7.
Our company is adapted with F standard strictly
8. Guarantee period: 12months at normal temperature.