Perlite thermal insulating mortar

Perlite thermal insulation mortar is ready to use heat insulating mortar, made by inorganic gelling materials with perlite light
Perlite thermal insulating mortar
Product Advantage
Small coefficient of heat conduct with high efficiency of heat preservation
High performance of water-proof with little shrinkage
High compressive strength and great workability
Great ability of anti-scissoring
Easy to use with good adaptation
Freeze-thaw resistance
Environment protective and non-flammable

Nature


Typical Properties
Dry kg/m3 ≤300 %
Wet kg/m3 ≤680
Compressive strength MPa ≥0.30
Bond strength MPa ≥0.1
W/mK ≤0.065
Shrinkage % ≤0.3
Tensile strength MPa ≥0.15
Softening coefficient ≥0.60
Storage coefficient w/.k ≥0.9

Recommended for
Thermal insulation of wall, roof and ceiling of all kinds of architecture, it can be used with other thermal insulating materials to form to system for heat preservation.
Guide to use
Batch
Add a bag of Perlite thermal insulation mortar1 bag mortar with 2 bag perliteto 15kg water and agitate it to make a paste for 1-2 minutes before the construction.
Construction
Paint the surface of architecture with a trowel, minimum thickness should be 10mm, after 12 hours later, paint again. The temperature should be above the 5 , keep away after construction for 2 hours, the mixed paste should be used within one hour and overdue paste is forbidden to use.
Storage
Woven fabric bag with plastic liner, please do not stored in the open air, easy to absorb moisture