Double components transparent waterproof RTV silicone potting rubber silicone pouring sealant

1) transparent waterproof RTV silicone
2) safe electrical performance
3) good heat resistance
4) accept sample orders
Double components transparent waterproof RTV silicone potting rubber silicone pouring sealant
INTRODUCTION
APS SC-1015 is two part, solvent free, silicone sealant cured in room temperature. It is one kind of high elasticity organosilicon pouring sealant for electronic components.
SPECIFICATION
Item
Qualification
Uncured
Appearance
A part: water clear, black, gray.
B part: water clear, black, gray.
Gravity(g/ml)
0.9±0.01
Viscosity(cP)
A part: 1800±50
B part: 10±1
Mix viscosity(cp)
1500±50
Operational time(h)
0.5~1.0
Initial curing time(h)
2~4
Completely curing time(h)
8
Cured
Strength of extension/MPa
≥1.2
Elongation at break /%
≥180
linear shrinkage /%
≤0.3
Dielectric strength(Kv/mm)
≥20
Volume resistivity /Ω.cm
≥1.0×10
14
SHORE A
10±1

USAGE
Stir A, B parts well respectively, then mix A and B well according A:B=100:10.
Encapsulation after mixed well (suggest to the vacuum debubbling).
If the poured components are tinny and multiple-slot, continuous pouring to be advised.
If pouring depth is more than 6mm, curing time will be longer.
NOTICE
B part should be seal preservation.
Curing time can be adjusted by B part. More B part, higher curing speed.
Avoid closed environment and high ambient temperature more than 60°C when curing.
STORAGE
Storage: in a cool and dry place.
PACKING
22Kg/pcs(A part 20Kg+B part 2Kg)