RTV Silicone sealant

rtv silicone sealant,single component, low modulus,acetic cure and high performance,is ideal for mutil- General purpose use
RTV silicone sealant
single-component, non-slumping that cures
to a permanently flexible silicone rubber on exposure to atmospheric moistureat room temperature. Formulated for hi-temp applications, or heavy duty use (such
as towing, etc), replaces almost any cut gasket by making reliable "formed-in-place"
gaskets that resist cracking or shrinking, and migrating caused by thermalcycling. Coats pro-cut gaskets to increase reliability. Resists auto and shop fluids.
Application:drive housings, exhaust manifolds, thermostat housings, valve covers, water pumps,

Usage:
1.Clean surface thoroughly and remove the old gasket then prepare the flange surface.Dry and remove all oil and grease.
2.Open the cap, puncture the inner seal of the tube,screw on the nozzle and cut the nozzle to the designed size.
3.Smear certain amount of sealant around the bolt,make sure the layer is thick enough.
4.Wait for about 10 minute to ensure the solidification effect,then reassemble the parts.
5.Touch it unless it dry for 1 hour and 24 hours to fully cure and bond.