RTV Silicone gasket maker

Item No: FO-159x
1.Ideally suited for intake and exhaust, manifolds, headers, thermostat housings, etc.
Direction:
1. Remove old gasket material from surfaces thoroughly.
2. Clean surface with residue-free solvent and allow surface to dry.
3. Cut nozzle to desired size.
4. Squeeze tube to form a continuous and even bead to the perimeter of mating surface and ail bolt hoes.
5. Tool within 5 minutes
6. Tightened to the required torque, do not overtighten
7. Clean off excess sealant with M. E. K or toluene.
Storage
Product should be stored in a cool and dry location at temperatre between -10 to 30C +.
Optimal storage is 22+/-4c+. Shelf life is 18 months from date of manufacture when store at 22+/-4c+.
Health & Safety in use .
Features:
1, Simply screw the lid tight, the tails of this series of products will
not easy to dry agglomeration, even if after being used.
2, Skin time (21 ° C) : 3-10 minutes.
3, Strength: As same as the acid or oxime cure neutral sealants in the
same grade. Products in Grade AA or A will almost not be pulled apart
by human hand.
4, Shelf-life: Will not to solidify in a sealed condition. And under the
same conditions, shelf-life will be longer than that of the silicone
sealant in the current market. At present, the shelf-life we
committed is 18 months. If this new silicone sealant is out of
date, it will never be cured.
5, Temperature resistance: -60°C--+300°C.
Product packaging sizes(FO-159X)
85g(3 oz)
144pcs/CTN GW: 18.65Kg
OUTER CARTON MEAS.
46X39.5X45cm
ONE 20'GP CAN CONTAIN 350 CTNS